Monterey - Ventura [Updating]

[jhay06]

Hi , sorry my other issue was closed recently and i understand it , because the title is for request for ventura , and technically its done .

so i created another one with new title

Okay , i have existing monterey , then downloaded the updated efi for Ventura support , update my EFI then use the "install only" config.plist first thinking that when i use this config i can just dowload the update from update manager ,

okay so i updated the efi , then reboot

after reboot my monterey is not booting anymore it just stuck in black

any ideas ? thanks

[jozews321]

Can you show me where it gets stuck. Also switch to the post install config.plist too

[jhay06]

this is where it stuck. i beleive the post install is macbookpro 10,1 that is my current efi config as per tonymacx86 . it doesnt show ventura update

[filipemsilv4]

Not what you asked for, but I recommend doing a clean install, I got awful performance by just updating.

[jhay06]

i try the clean install but i cant get wifi working . i tried also the ethernet cable but connecting with ethernet cable got a fixed wrong ip . 11.X.X.X my server is 192.168 so i changed the ip using ifconfig and change default gw and change the dns . but still cant get the internet working

[filipemsilv4]

i try the clean install but i cant get wifi working . i tried also the ethernet cable but connecting with ethernet cable got a fixed wrong ip . 11.X.X.X my server is 192.168 so i changed the ip using ifconfig and change default gw and change the dns . but still cant get the internet working

Do you have the stock WiFi card? (Centrino 6205-N)

[jhay06]

yes . infact its working in my current version of mac . monterey

[filipemsilv4]

yes . infact its working in my current version of mac . monterey

Check if Airportitlwm13 kext (or something like that) is enabled on Ventura. If you're using the same EFI for Monterey and Ventura, and Wifi works only on Monterey, it's possible that Airportitlwm12 is enabled and Airportitlwm13 is not.

[jhay06]

im using the updated efi from the releases . i believed its already set up . but will check also thanks

[jhay06]

i can confirm that airportitlwm13 is loaded but not working from installer gui. so i try to download offline full installer ventura 13.4 it successfully install with installonly but cant proceed on the setup changing it to postinstall config doesnt fix it. when gui enter to choose the country the mac suddenly goes gray screen then black screen telling that the system will shutdown.

[filipemsilv4]

i can confirm that airportitlwm13 is loaded but not working from installer gui. so i try to download offline full installer ventura 13.4 it successfully install with installonly but cant proceed on the setup changing it to postinstall config doesnt fix it. when gui enter to choose the country the mac suddenly goes gray screen then black screen telling that the system will shutdown.

I got this problem on the "choose country" screen too. You need to use the installation config in this part and only change to the postinstall config after you get to the desktop.

[jozews321]

Airportitlwm is very buggy in Ventura, even more in the recovery OS. I would advice to use ethernet or Android tethering Edit: It seems that they released a new update to address the wifi networks not showing up. It's going to be included In the next release

[jhay06]

i cant continue to setup ventura 13.4 when select country shows up the screen it suddenly greyed out then black screen with logs then reboot .

i tried also to install version 13 official release but i have a problem in completing the installation . it always show error failed updating the system .

what specific version of ventura works?

[jhay06]

i can confirm that airportitlwm13 is loaded but not working from installer gui. so i try to download offline full installer ventura 13.4 it successfully install with installonly but cant proceed on the setup changing it to postinstall config doesnt fix it. when gui enter to choose the country the mac suddenly goes gray screen then black screen telling that the system will shutdown.

I got this problem on the "choose country" screen too. You need to use the installation config in this part and only change to the postinstall config after you get to the desktop.

actually i experience the same behavior with install only and post install . what version og ventura you used?

[filipemsilv4]

i can confirm that airportitlwm13 is loaded but not working from installer gui. so i try to download offline full installer ventura 13.4 it successfully install with installonly but cant proceed on the setup changing it to postinstall config doesnt fix it. when gui enter to choose the country the mac suddenly goes gray screen then black screen telling that the system will shutdown.

I got this problem on the "choose country" screen too. You need to use the installation config in this part and only change to the postinstall config after you get to the desktop.

actually i experience the same behavior with install only and post install . what version og ventura you used?

I've used 13.4

[jhay06]

i managed to install now the 13 official release i just plugged the lan and then the error disappear, but the wifi is not working when i switched to postinstall config, but from the installonly config . the wifi works

what is the difference between this 2 config?

ventura doesnt have problems in install config . i just retain the installonly config even after installl everything seems working fine. postinstall config wifi doesnt work

privacy and security doesnt work i try to use zoom but cannot find the microphone access request from privacy and security

[filipemsilv4]

i managed to install now the 13 official release i just plugged the lan and then the error disappear, but the wifi is not working when i switched to postinstall config, but from the installonly config . the wifi works

what is the difference between this 2 config?

ventura doesnt have problems in install config . i just retain the installonly config even after installl everything seems working fine. postinstall config wifi doesnt work

privacy and security doesnt work i try to use zoom but cannot find the microphone access request from privacy and security

Since amfi is disabled, you'll need tccplus in order to give permissions.

[jozews321]

A just released a new update, the intel wifi should work in Ventura much more reliably

[jhay06]

A just released a new update, the intel wifi should work in Ventura much more reliably

doest boot . stuck on apple logo using postinstall. i just update my efi and put all my macbookpro10,1 confif on the latest config.plist and i got stucked on apple logo

[jhay06]

do i need to clean install again?

[jozews321]

In the config.plist add -v to boot-args and send me a photo or something of where it gets stuck

[jhay06]

[jozews321]

It looks like a bios config is wrong, check it again and reset nvram

[jhay06]

It looks like a bios config is wrong, check it again and reset nvram

does resetting nvram safe on thinkpad T430? i saw from opencore disclaimer that resetting nvram can damage thinkpad . i just want to confirm if is it safe on our unit?

[filipemsilv4]

It looks like a bios config is wrong, check it again and reset nvram

does resetting nvram safe on thinkpad T430? i saw from opencore disclaimer that resetting nvram can damage thinkpad . i just want to confirm if is it safe on our unit?

It is safe on our model. Just be careful not to lose other boot entries when resetting NVRAM.

[jhay06]

noted on that . but on the latest EFI theres no reset nvram option .

[jozews321]

Yeah it's safe. The issue with resetting NVRAM was in early bios revisions of the t480. Press space on the picker to reveal the NVRAM reset option

[jhay06]

done resetting but still hang

[filipemsilv4]

I have the same problem. This wasn't happening on the previous EFI.

[jhay06]

i think the new efi requires us to clean install not only updating the efi

[jozews321]

Oh, with the new EFI the version 2.1.0 you need to unpatch the system using OCLP and EFI version 2.0.0 first and then use the new one

[filipemsilv4]

Oh, with the new EFI the version 2.1.0 you need to unpatch the system using OCLP and EFI version 2.0.0 first and then use the new one

That's what I did

[jhay06]

already done unpatching but same result

[jhay06]

any updates

[filipemsilv4]

any updates

I haven't tried a clean install because I don't have time right now, but I bet that it will solve the issue.

[jhay06]

i can confirm that the latest efi is not working at all. i tried to clean install even i used the install only config it doesnt boot the installer . stucked in the same logs

[jozews321]

Ok noted, I will release a new one trying to address the issue. For now you can try to add amfi=0x80 to boot-args

[jhay06]

Ok noted, I will release a new one trying to address the issue. For now you can try to add amfi=0x80 to boot-args

hi sir, what is this for ? is this args is to disable amfi? thanks

by the way in the instruction , there's a steps to do this https://dortania.github.io/OpenCore-Post-Install/universal/pm.html#ssdtprgen-troubleshooting ?

does this steps need to do individually per device ? thanks

[jozews321]

Yes, with that you will disable amfi

[jhay06]

okay i tried the amfi=0x80 still not booting.

[jozews321]

And with the v2.0.0 EFI it boots right? Try to disable the AMFIPass kext too

[jhay06]

kernel panic

[jozews321]

Oh that explains a lot the power management Kexts are panicking. It's complaining about the CFG lock. Have you changed the bundled OpenCore or disabled the AppleCpuPmCfgLock quirk?

[jhay06]

no im not changing any , i just used the config and efi from the releases page

[jhay06]

any updates ? thanks

[jhay06]

hi sir any updates on this , thanks

[jozews321]

Have you used release v2.0.0?

[jhay06]

yes , im currently using it 2.0.0 because its working , but apps like android emulator , virualbox are crashing there .

[jozews321]

Also what OS version are you using?

[jhay06]

Ventura 13.4

[jozews321]

Ok I just released v2.1.1 to fix the issue. Tell me if it works now, remember unpatch your system first and then try the new release and patch with OCLP 0.6.7 amfipass beta