New Sketch 5A7A1-SNSR_PANEL.ino

[Arribe]

Description

New sketch for the 5A7A1-SNSR_PANEL.ino. Not a simple sketch to create due to a variety of reasons. Primarily not hooking up the off pins on the rotary led to excessive logic.

DCSBios does not cleanly support the LTD/R mag-switch logic to match the sim's native behavior.

Closes #57

Dependencies

• List any dependencies that are required for this change, including a full list of libraries required, especially if it is a new or otherwise unused library in the OpenHornet software.

Type of change

• [x] New software module (new software module for slave)
• [] Bug fix (non-breaking change which fixes an issue)
• [] New feature (non-breaking change which adds functionality)
• [] Breaking change (fix or feature that would cause existing functionality to not work as expected)
• [] This change requires a documentation update outside of the automatically-generated Doxygen documentation.

Checklist:

• [x] My code follows the style guidelines of this project
• [x] I have complied with the software manual for this project
• [x] I have performed a self-review of my own code
• [x] I have commented my code fully with Doxygen compatible comments, particularly in hard-to-understand areas
• [x] I have made corresponding changes to non-Doxygen generated documentation
• [x] I have ran Doxygen locally, and it builds the docs successfully
• [x] My changes generate no errors on compile in Arduino IDE
• [x] My changes generate no new warnings on compile in Arduino IDE
• [x] Any dependent changes have been merged and published in downstream modules
• [x] (For sketches only) This sketch complies with OH-INTERCONNECT v10
• [ ] If this sketch requires additional libraries, I have added it as a sub-module per the Arduino Libraries section of the Software Manual.

How Has This Been Tested?

• [ ] I have tested the sketch in-circuit in DCS with DCS-BIOS and outputs (displays, LEDs, etc.) function as expected.
• [ ] I have tested the sketch in-circuit in DCS with DCS-BIOS and HID inputs (switches, pots, etc.) function as expected, with switches moving the correct direction.
• [x] I have tested the sketch in-circuit in DCS with DCS-BIOS and any logic in the sketch has been tested and functions mostly as expected.
• [ ] This code has not yet been tested in-circuit.
• [ ] This code has not yet been tested in DCS-BIOS.

Description of Testing

Meh...it is what it is...

Loaded the sketch tested all of the basic switches, and the rotaries. Everything that is connected to a physical pin on the Arduino works fin. The off positions on the rotaries are hit or miss.

DCSBios limitations lead to limited ability to match the sim's mag-switch logic.

Test Configuration

• Firmware version:
• Hardware: OH 0.2.0
• Toolchain:
• SDK: DCSBios FP 0.3.9