On the ATX PSU breakout board, the two 2x3 Molex connectors are spaced very close together.
Expected Results
Even after connecting the cables, I want to be able to remove them again for maintenance purposes.
Actual Results
After connecting the lower one, it is barely possible to lift the release hook again - it is blocked by the other connector. This makes the cable difficult to remove.
Screenshots/Images/Files
No response
Applicable Part Numbers
ABSIS006
Release Version
v0.2.0
Category
Electrical (PCBs/Wiring/etc)
Applicable End Item(s)
Lower Instrument Panel (LIP)
Built to print?
[X] I built (or attempted to build) the part to the OpenHornet print without any deviations.
[ ] I am not building this part to the OH print. (List deviations in detail in the Miscellaneous Info text area below.)
eHanseJoerg
commented
1 month ago
Discord Username
Ulukaii
Bug Summary
On the ATX PSU breakout board, the two 2x3 Molex connectors are spaced very close together.
Expected Results
Even after connecting the cables, I want to be able to remove them again for maintenance purposes.
Actual Results
After connecting the lower one, it is barely possible to lift the release hook again - it is blocked by the other connector. This makes the cable difficult to remove.
Screenshots/Images/Files
No response
Applicable Part Numbers
ABSIS006
Release Version
v0.2.0
Category
Electrical (PCBs/Wiring/etc)
Applicable End Item(s)
Lower Instrument Panel (LIP)
Built to print?
Miscellaneous Info
Had the part ordered via JLCPCB .