This modification provides a single piece AMPCD bezel and button/rocker for printing with resin instead of FDM, or milled from Aluminium.
File format for the single piece bezel is in .3MF and .STEP (for flexibility between manufacturers.
Knob OHC0003-412FGB2 has been modified by recessing the black identification strip around the arrow for ease of masking and paiting. Two models are provide - one has the set screw (92311A102) thread modelled.
A lychee scene has been added with pre supported buttons and knobs for resin printing - this has been tested with the use of Elegoo ABS-like resin.
Addresses N/A
Motivation and Context
User preference, alternate to facilitate resin print or milling the bezel.
Type of change
Please delete options that are not relevant.
[X] MCAD - New Part (new Mechanical Model)
How Has This Been Tested?
Please describe the tests that you ran to verify your changes. Provide instructions so we can reproduce. Please also list any relevant details for your test configuration:
Fully built and tested independently at the assembly level.
Checklist: (Delete non-relevant sections)
MCAD:
[X] Design intent and requirements have been met?
[X] Design has been fit checked to ensure no interference exists with any other components?
[X] Design has been integrated into Next Higher Assembly (NHA)?
[ ] Drawing has been revised, (i.e. Rev - to Rev A) with all changes described in Revision Description Block?
[ ] Did the parts list change?
If yes:
[ ] Master Parts List (OH-MPL) update required due to change? (PR will not be accepted without MPL changes integrated.)
[ ] Drawing Tree (OH-DWG-TREE) update required due to change? (Mostly just new MCAD parts will require this. PR will not be accepted until Drawing Tree updates are completed, or an issue is generated detailing what changes need to be made.)
[ ] Interconnect (OH-Interconnect) update required due to change? (Does this need to plug into another part or assembly electrically? PR will not be accepted until interconnect updates and interconnect BOM is updated.)
[ ] Has the PDF of the drawing been named as the next version and placed in the release folder with the correct filename?
[X] Have all required manufacturing files been generated, named correctly, and placed in the correct location in the release folder?
Description
Addresses N/A
Motivation and Context
Type of change
Please delete options that are not relevant.
How Has This Been Tested?
Please describe the tests that you ran to verify your changes. Provide instructions so we can reproduce. Please also list any relevant details for your test configuration:
Checklist: (Delete non-relevant sections)
MCAD: