LIP Release Package

[jrsteensen]

• [x] Update all knobs (shaft cavity and set screws).
  • [x] VIDEO RECORD Panel
  • [x] AMPCD Assy
  • [x] SARI Bezel
  • [x] RWR Bezel
  • [x] ALTIMETER Bezel
  • [x] ECM JETT Panel
• [x] Replace all EVU-F2MFL3B14 pots with P0915N-FC20BR10K pot.
  • [x] RWR Bezel
• [x] Check all legends to ensure they are correct.
• [x] Ensure all CNC'd parts have internal radii at corners.
• [x] Complete all outstanding items assigned in end item project.
• [x] Add all controller PCBs to MCAD.
  • [x] AMPCD Shield
  • [x] AMPCD Controller PCB
• [x] Make the following modifications to model:
  • [x] Move Upper Center Pedestal Face from structure to top level.
  • [x] Move Lower Center Pedestal Face from structure to top level.
  • [x] Move Left LIP from structure to top level and convert to module (like standby instrument module.)
    • Add ABSIS Nano, RS485 Master and Display Controller to Module
• [x] Update interconnect diagram.
• [x] Generate exploded views
  • [x] LIP Top Level: OH2A1A
  • [x] AMPCD Assy: OH2A4A
  • [x] Standby Instrument Module: OH2A7A
• [ ] Generate drawings.
  • [ ] LIP Top Level: OH2A1
  • [ ] Ruder Pedal Gantry: OH2A1A-100
  • [ ] LIP Structure: OH2A1A1
  • [x] Left LIP Module: OH2A2
    • [x] SELECT JETT Panel: OH2A2A1
    • [x] IFEI: OH2A2A2
    • [x] VIDEO RECORD Panels: OH2A2A3
  • [x] AMPCD Assy: OH2A3
  • [x] RWR Control Panel: OH2A4
  • [x] DISP/ECM Panel: OH2A5
  • [x] Cabin Pressure Gauge: OH2A6
  • [x] Standby Instrument Module: OH2A7
• [ ] Check for duplicate hardware.
• [ ] Generate all intermediate/manufacturing files.

[jrsteensen]

AMPCD drawing done by @L-Walker. Post rudder gantry design, will need to update

• [ ] LIP Top Level: OH2A1
• [ ] Ruder Pedal Gantry: OH2A1A-100
• [ ] LIP Structure: OH2A1A1

[jrsteensen]

This will be reevaluated based on the latest design with all new backlit components. May have to regenerate all drawings. I hope not.

[jrsteensen]

Combined into #313