Inner grip issues.

[MrMagicMan]

• [ ] 1. Communication switch has an encoder and is able to rotate. (https://photos.app.goo.gl/aSfpeYJYM2tXSM8q8)

• [ ] 2. Communications switch can rotate in place. and needs significant glue to hold it in place.(https://photos.app.goo.gl/aSfpeYJYM2tXSM8q8)

(1-2) Look at changing to 8 way switch (https://photos.app.goo.gl/j41mbaQUGQoDMsS86)

• [ ] 3. Communications switch cannot be installed without bending pins, the mounting location is in the way (https://photos.app.goo.gl/mjRqkzRxirejwYrR7)

• [x] 4. Analog stick pot is rubbing on lower TDC Body ( )

• [x] 5. Antenna Elevation switches are too weak (https://photos.app.goo.gl/mjRqkzRxirejwYrR7)

[jrsteensen]

PCBs TODO:

• [x] THROTTLE_INNER_GRIP
  • [x] Select and add LCSC field to metadata for C1, C7, and C8.
  • [x] Generate JLCPCB BOM & POS files.
  • [x] Any silkscreen work required? (Just clarified that JOY1 = TDC on the silkscreen)
• [x] ANALOG_STICK_BREAKOUT
  • [x] Select and add LCSC field to metadata for C1.
  • [x] Generate JLCPCB BOM & POS files.

[jrsteensen]

Inner Grip TODO:

• [x] Integrate the analog_stick_breakout PCB.
• [x] Integrate the comms switch breakout PCB. - Integrating the 8 way hat.
• [x] Integrate the 8 way hat (throttle_hat_switch_pcb)
• [x] Integrate the inner grip breakout PCB.
• [x] Consider changing comms switch to 8-way hat (mechanically restricted to 4 way + push) or add pin to one side of switch to restrict rotation. - Will be doing this. Thanks for already having the design done and ready to drop in, @MrMagicMan.
• [x] Add clearances for analog switch pivots.
• [x] Increase spring forces on TDC springs to overcome friction.
• [ ] Add washer and nut clearances for P081N-271F2CBR10K pot to ANT ELEV Mechanism Bracket

[jrsteensen]

Completed all items except pot to ANT ELEV in commit #bbf73bf

[jrsteensen]

On hold pending information from pot MFG for nut size so I can make the one cutout in the ANT ELEV plate.

[jrsteensen]

Closed with e658cce