search

jsproull / kriek

Kriek is the easiest to use brewing control software for the raspberry pi.
GNU General Public License v2.0
17 stars 6 forks source link

One-Wire #14

Open adaptiman opened 8 years ago

adaptiman commented 8 years ago

Does Kriek support the one-wire protocol? If so, can I control 2-way and 3-way valves using one-wire with feedback for valve state?

jsproull commented 8 years ago

Hi David, Yes, kriek supports one wire, but it might require some custom code depending on the valves. If they're simple on/off then that it supported. If they are returning a proportional value, then that would require code changes. Which ones are you looking at? I'm interested in playing with automating the valves in my setup as well.

On Tue, Jan 12, 2016 at 5:46 PM, David Sweeney notifications@github.com wrote:

Does Kriek support the one-wire protocol? If so, can I control 2-way and 3-way valves using one-wire with feedback for valve state?

— Reply to this email directly or view it on GitHub https://github.com/jsproull/kriek/issues/14.

adaptiman commented 8 years ago

Three-way horizontal: http://www.china-tonhe.com/?u=2&m=product&id=541

Also three-way vertical:

http://www.china-tonhe.com/?u=2&m=product&id=569

I’ll also use a straight through:

http://www.china-tonhe.com/?u=2&m=product&id=524

Wiring diagram for all is CR502 spring loaded, with 12v power to actuate, no power=default position, and three wires to detect state.

Here’s the control layout:

https://drive.google.com/a/thesweeneys.org/file/d/0BytYm_fvz4PoNTdzUUdJYVo2V1U/view?usp=sharing

David Sweeney Department of Information Technology Division of Student Affairs Texas A&M University sweeney@tamu.edumailto:sweeney@tamu.edu

From: John Sproull [mailto:notifications@github.com] Sent: Tuesday, January 12, 2016 4:49 PM To: jsproull/kriek kriek@noreply.github.com Cc: Sweeney, David sweeney@tamu.edu Subject: Re: [kriek] One-Wire (#14)

Hi David, Yes, kriek supports one wire, but it might require some custom code depending on the valves. If they're simple on/off then that it supported. If they are returning a proportional value, then that would require code changes. Which ones are you looking at? I'm interested in playing with automating the valves in my setup as well.

On Tue, Jan 12, 2016 at 5:46 PM, David Sweeney notifications@github.com wrote:

Does Kriek support the one-wire protocol? If so, can I control 2-way and 3-way valves using one-wire with feedback for valve state?

— Reply to this email directly or view it on GitHub https://github.com/jsproull/kriek/issues/14.

— Reply to this email directly or view it on GitHubhttps://github.com/jsproull/kriek/issues/14#issuecomment-171086990.

jsproull commented 8 years ago

well this is awesome. any idea on price of those?

On Tue, Jan 12, 2016 at 6:03 PM, David Sweeney notifications@github.com wrote:

Three-way horizontal: http://www.china-tonhe.com/?u=2&m=product&id=541

Also three-way vertical:

http://www.china-tonhe.com/?u=2&m=product&id=569

I’ll also use a straight through:

http://www.china-tonhe.com/?u=2&m=product&id=524

Wiring diagram for all is CR502 spring loaded, with 12v power to actuate, no power=default position, and three wires to detect state.

Here’s the control layout:

https://drive.google.com/a/thesweeneys.org/file/d/0BytYm_fvz4PoNTdzUUdJYVo2V1U/view?usp=sharing

David Sweeney Department of Information Technology Division of Student Affairs Texas A&M University sweeney@tamu.edumailto:sweeney@tamu.edu

From: John Sproull [mailto:notifications@github.com] Sent: Tuesday, January 12, 2016 4:49 PM To: jsproull/kriek kriek@noreply.github.com Cc: Sweeney, David sweeney@tamu.edu Subject: Re: [kriek] One-Wire (#14)

Hi David, Yes, kriek supports one wire, but it might require some custom code depending on the valves. If they're simple on/off then that it supported. If they are returning a proportional value, then that would require code changes. Which ones are you looking at? I'm interested in playing with automating the valves in my setup as well.

On Tue, Jan 12, 2016 at 5:46 PM, David Sweeney notifications@github.com wrote:

Does Kriek support the one-wire protocol? If so, can I control 2-way and 3-way valves using one-wire with feedback for valve state?

— Reply to this email directly or view it on GitHub https://github.com/jsproull/kriek/issues/14.

— Reply to this email directly or view it on GitHub< https://github.com/jsproull/kriek/issues/14#issuecomment-171086990>.

— Reply to this email directly or view it on GitHub https://github.com/jsproull/kriek/issues/14#issuecomment-171090538.

adaptiman commented 8 years ago

John:

Can I get your real email address so we can converse off of Github?

David Sweeney Department of Information Technology Division of Student Affairs Texas A&M University sweeney@tamu.edumailto:sweeney@tamu.edu

From: John Sproull [mailto:notifications@github.com] Sent: Tuesday, January 12, 2016 5:11 PM To: jsproull/kriek kriek@noreply.github.com Cc: Sweeney, David sweeney@tamu.edu Subject: Re: [kriek] One-Wire (#14)

well this is awesome. any idea on price of those?

On Tue, Jan 12, 2016 at 6:03 PM, David Sweeney notifications@github.com wrote:

Three-way horizontal: http://www.china-tonhe.com/?u=2&m=product&id=541

Also three-way vertical:

http://www.china-tonhe.com/?u=2&m=product&id=569

I’ll also use a straight through:

http://www.china-tonhe.com/?u=2&m=product&id=524

Wiring diagram for all is CR502 spring loaded, with 12v power to actuate, no power=default position, and three wires to detect state.

Here’s the control layout:

https://drive.google.com/a/thesweeneys.org/file/d/0BytYm_fvz4PoNTdzUUdJYVo2V1U/view?usp=sharing

David Sweeney Department of Information Technology Division of Student Affairs Texas A&M University sweeney@tamu.edumailto:sweeney@tamu.edu

From: John Sproull [mailto:notifications@github.com] Sent: Tuesday, January 12, 2016 4:49 PM To: jsproull/kriek kriek@noreply.github.com Cc: Sweeney, David sweeney@tamu.edu Subject: Re: [kriek] One-Wire (#14)

Hi David, Yes, kriek supports one wire, but it might require some custom code depending on the valves. If they're simple on/off then that it supported. If they are returning a proportional value, then that would require code changes. Which ones are you looking at? I'm interested in playing with automating the valves in my setup as well.

On Tue, Jan 12, 2016 at 5:46 PM, David Sweeney notifications@github.com wrote:

Does Kriek support the one-wire protocol? If so, can I control 2-way and 3-way valves using one-wire with feedback for valve state?

— Reply to this email directly or view it on GitHub https://github.com/jsproull/kriek/issues/14.

— Reply to this email directly or view it on GitHub< https://github.com/jsproull/kriek/issues/14#issuecomment-171086990>.

— Reply to this email directly or view it on GitHub https://github.com/jsproull/kriek/issues/14#issuecomment-171090538.

— Reply to this email directly or view it on GitHubhttps://github.com/jsproull/kriek/issues/14#issuecomment-171092303.

feltoxXx commented 8 years ago

I am very interesting with this project... i am using for monitoring the mash temp of my RIMS... i want to control several electro valves too...

Please help me with how to connect the ssr pin out, i configured it via the admin page but i do not know how pin to put there...

ebansberg commented 8 years ago

If you guys could share the information somehow, that would be awesome. I think many others are looking at automating valves as well.

Thanks,

Erik On Jan 13, 2016 9:04 AM, "David Sweeney" notifications@github.com wrote:

John:

Can I get your real email address so we can converse off of Github?

David Sweeney Department of Information Technology Division of Student Affairs Texas A&M University sweeney@tamu.edumailto:sweeney@tamu.edu

From: John Sproull [mailto:notifications@github.com] Sent: Tuesday, January 12, 2016 5:11 PM To: jsproull/kriek kriek@noreply.github.com Cc: Sweeney, David sweeney@tamu.edu Subject: Re: [kriek] One-Wire (#14)

well this is awesome. any idea on price of those?

On Tue, Jan 12, 2016 at 6:03 PM, David Sweeney notifications@github.com wrote:

Three-way horizontal: http://www.china-tonhe.com/?u=2&m=product&id=541

Also three-way vertical:

http://www.china-tonhe.com/?u=2&m=product&id=569

I’ll also use a straight through:

http://www.china-tonhe.com/?u=2&m=product&id=524

Wiring diagram for all is CR502 spring loaded, with 12v power to actuate, no power=default position, and three wires to detect state.

Here’s the control layout:

https://drive.google.com/a/thesweeneys.org/file/d/0BytYm_fvz4PoNTdzUUdJYVo2V1U/view?usp=sharing

David Sweeney Department of Information Technology Division of Student Affairs Texas A&M University sweeney@tamu.edumailto:sweeney@tamu.edu

From: John Sproull [mailto:notifications@github.com] Sent: Tuesday, January 12, 2016 4:49 PM To: jsproull/kriek kriek@noreply.github.com Cc: Sweeney, David sweeney@tamu.edu Subject: Re: [kriek] One-Wire (#14)

Hi David, Yes, kriek supports one wire, but it might require some custom code depending on the valves. If they're simple on/off then that it supported. If they are returning a proportional value, then that would require code changes. Which ones are you looking at? I'm interested in playing with automating the valves in my setup as well.

On Tue, Jan 12, 2016 at 5:46 PM, David Sweeney notifications@github.com

wrote:

Does Kriek support the one-wire protocol? If so, can I control 2-way and 3-way valves using one-wire with feedback for valve state?

— Reply to this email directly or view it on GitHub https://github.com/jsproull/kriek/issues/14.

— Reply to this email directly or view it on GitHub< https://github.com/jsproull/kriek/issues/14#issuecomment-171086990>.

— Reply to this email directly or view it on GitHub https://github.com/jsproull/kriek/issues/14#issuecomment-171090538.

— Reply to this email directly or view it on GitHub< https://github.com/jsproull/kriek/issues/14#issuecomment-171092303>.

— Reply to this email directly or view it on GitHub https://github.com/jsproull/kriek/issues/14#issuecomment-171343433.