search

jtebbens / com.homewizard

Homewizard app for Homey
9 stars 7 forks source link

Can't connect my HomeWizard to my Homey Pro #44

Closed mtvdham closed 3 years ago

mtvdham commented 3 years ago

I have installed the Homewizard app on my homey everting looks good. Only when i like to connect i fill in the local ip adress en the key then nothing happen?! Can you tel me what i have done wrong?

jtebbens commented 3 years ago

Either your HomeWizard ip is wrong or password.

Verify in browser if this works.

http://x.x.x.x/password/get-sensors

PaulLoos commented 3 years ago

I have the same problem. Installed a Homey-Pro and want to connect my Homewizard to Homey. 1st rebooted both, then installed the Homewizard-app in Homey (no problems) then try to add the HW as device. At the IP address I add: 192.168.0.5:82 (port 82) and then the local password of HW. But then, nothing happens because the "opslaan" button does not respond. Homey is in the same network. (192.168.0.121) . Both HW and Homey run fine seperately. What can I try more? Thanks!

jtebbens commented 3 years ago

I have the same problem. Installed a Homey-Pro and want to connect my Homewizard to Homey. 1st rebooted both, then installed the Homewizard-app in Homey (no problems) then try to add the HW as device. At the IP address I add: 192.168.0.5:82 (port 82) and then the local password of HW. But then, nothing happens because the "opslaan" button does not respond. Homey is in the same network. (192.168.0.121) . Both HW and Homey run fine seperately. What can I try more? Thanks!

Answer to that is simple. The code does not cater for port 82 but expects the default 80 for homewizard

PaulLoos commented 3 years ago

Thank you for your answer. Allthough I have tried this, without succes, i will try this option again in the next days and let you know.

23 apr. 2021 17:25:34 jtebbens @.***>:

I have the same problem. Installed a Homey-Pro and want to connect my Homewizard to Homey. 1st rebooted both, then installed the Homewizard-app in Homey (no problems) then try to add the HW as device. At the IP address I add: 192.168.0.5:82 (port 82) and then the local password of HW. But then, nothing happens because the "opslaan" button does not respond. Homey is in the same network. (192.168.0.121) . Both HW and Homey run fine seperately. What can I try more? Thanks!

Answer to that is simple. The code does not cater for port 82 but expects the default 80 for homewizard

— You are receiving this because you commented. Reply to this email directly, view it on GitHub[https://github.com/jtebbens/com.homewizard/issues/44#issuecomment-825734729], or unsubscribe[https://github.com/notifications/unsubscribe-auth/ATZ3QGPG6KPAKNU2A6HVNYDTKGGO3ANCNFSM43KY6TEQ].

mtvdham commented 3 years ago

To day it’s work by me to connect the HomeWizard

jtebbens commented 3 years ago

Closed issue (default port is 80/tcp)

PaulLoos commented 3 years ago

Problem solved this afternoon. Although the settings within HW showed 192.168.0.5 , the real IP was an other. Since an other device had 192.168.0.5, a ping confirmed that there was indeed a device.

So, after completely resetting the HW, and set a new IP number, your app found it and installed it in Homey.

Thank you for your support!

Op wo 28 apr. 2021 om 14:58 schreef jtebbens @.***>:

Closed issue (default port is 80/tcp)

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/jtebbens/com.homewizard/issues/44#issuecomment-828433537, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATZ3QGO5PDT4L4UFIZ2IMJDTLAA5RANCNFSM43KY6TEQ .