Small MP bug in Camera set-up

GoogleCodeExporter commented 8 years ago

What steps will reproduce the problem?
1. open MP's Camera Gimbal screen
2. set Pan (i.e. yaw) to Disable
3. check Parameter List for MNT_STAB_YAW

What is the expected output? What do you see instead?
When Pan is Disabled MNT_STAB_YAW should be set to zero but it is instead 
always set to 1.  In fact any change to the Camera Gimbal's Pan drop-down seems 
to reset the MNT_STAB_YAW to 1.

The same actually seems true of the Roll and Tilt drop-downs but people 
generally want those enabled in any case so it's not causing problems...but 
technically speaking MNT_STAB_ROLL and MNT_STAB_PITCH should also be set to 
zero when their corresponding dropdowns are set to Disabled.

Original issue reported on code.google.com by rmackay...@gmail.com on 2 Aug 2012 at 4:04

GoogleCodeExporter commented 8 years ago

will be fixed in next release

Original comment by Meee...@gmail.com on 4 Aug 2012 at 12:41

GoogleCodeExporter commented 8 years ago

Original comment by Meee...@gmail.com on 6 Aug 2012 at 11:11

Changed state: Fixed

juancarlostinoco / ardupilot-mega

Small MP bug in Camera set-up #701