search

jung6717 / arduino

Automatically exported from code.google.com/p/arduino
0 stars 0 forks source link

Sketch not saved if save as of read-only sketch is cancelled. #88

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Open an existing sketch 
2. Edit it but don't save yet
3. Open a read only example - i.e.Blink
4. Popup: "Save Changes to <sketch name> ?" - say YES
5. Popup: "Sketch is Read-only" - hit OK, cancel out of save as
6. Close IDE or move to another sketch
7. Edits were not saved

What is the expected output? What do you see instead?

Please use labels and text to provide additional information.

http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1250828537
Found this on the Windows 0017 release . . .

Original issue reported on code.google.com by dmel...@gmail.com on 21 Aug 2009 at 8:23

GoogleCodeExporter commented 9 years ago 
See also: http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1250930766

Original comment by dmel...@gmail.com on 22 Aug 2009 at 7:24

GoogleCodeExporter commented 9 years ago 
It's even simpler to loose work with REL 0017 (on Windows at least).
It's gotten pretty simple to reproduce:
1. edit a sketch
2. either close with the X or just open a new sketch
3. you are prompted if you want to save your work - hit "Yes"
4. you loose your work
Quite surprised this is listed as Medium Priority!

Original comment by johngiam...@gmail.com on 28 Aug 2009 at 2:20

GoogleCodeExporter commented 9 years ago 
Can you guys check if the latest version of Processing has the same problems?  
Arduino 0018 will sync against 
its code base, and it would be good to know if that will fix the problem or not.

Original comment by dmel...@gmail.com on 29 Aug 2009 at 10:29

GoogleCodeExporter commented 9 years ago

Original comment by dmel...@gmail.com on 29 Aug 2009 at 10:31

GoogleCodeExporter commented 9 years ago 
See: http://dev.processing.org/bugs/show_bug.cgi?id=1193

Original comment by dmel...@gmail.com on 6 Sep 2009 at 3:52

GoogleCodeExporter commented 9 years ago 
And: http://dev.processing.org/bugs/show_bug.cgi?id=1418

Original comment by dmel...@gmail.com on 26 Dec 2009 at 2:05

GoogleCodeExporter commented 9 years ago

Original comment by dmel...@gmail.com on 26 Dec 2009 at 3:48