search

jurobystricky / Netgear-A6210

AC1200 High Gain WiFi USB Adapter Linux kernel driver
292 stars 155 forks source link

Ubuntu 16.04.1 Cannot get driver to work properly #25

Open wolfland opened 8 years ago

wolfland commented 8 years ago

I cannot seem to get my new A6210 Netgear adapter to work with this driver. The driver seems to make/sudo make install fine as well as modprobe fine but the adapter shows up as "device not managed" if at all. I tried restarting the network-manager service and it did not help. I did notice that there were some segfaults happening.

I have included a cut/paste of my terminal session.

Any help would be appreciated and Thanks

Netgear-A6210.txt

jurobystricky commented 8 years ago

Thanks. I will install Ubuntu 16.04.1 and see if I can reproduce the problem.

wolfland commented 8 years ago

Thanks.. If you need me to reproduce and gather more data or run some

test code just let me know.

On 08/10/2016 04:18 PM, jurobystricky wrote:

Thanks. I will install Ubuntu 16.04.1 and see if I can reproduce the problem.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/jurobystricky/Netgear-A6210/issues/25#issuecomment-238990704, or mute the thread https://github.com/notifications/unsubscribe-auth/AIjIgMjvFCCKUYOBS9YUEebYkNLDmyzXks5qejITgaJpZM4JhhWH.

chriscoyfish commented 8 years ago

I also had some issues, but after fiddling around (unfortunately don't remember exact steps), I was able to get it the point where on boot I also get a SIGSEGV (here is the crash log: https://gist.github.com/chriscoyfish/49de32f33eed2e623ba29470ec746699 ) ...but if I "sudo service network-manager restart", the wlan0 interface gets detected and everything works as expected until after a reboot.

wolfland commented 8 years ago

I tried again and this time it worked. I am not sure why it didn't work last time unless the recent kernel update fixed it.

Here is what I did..

from the directory that contains the extracted code:

$ make $ sudo make install $ sudo modprobe mt7662u_sta $ sudo service network-manager restart

and this time it worked.

Thanks for the help and quick response and feel free to close the issue.

On 08/13/2016 08:45 PM, Chris Coykendall wrote:

I also had some issues, but after fiddling around (unfortunately don't remember exact steps), I was able to get it the point where on boot I also get a SIGSEGV (here is the crash log: https://gist.github.com/chriscoyfish/49de32f33eed2e623ba29470ec746699 ) ...but if I "sudo service network-manager restart", the wlan0 interface gets detected and everything works as expected until after a reboot.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/jurobystricky/Netgear-A6210/issues/25#issuecomment-239649508, or mute the thread https://github.com/notifications/unsubscribe-auth/AIjIgKizn4IHDl1LDSVbBkuft4KznFpiks5qfmUmgaJpZM4JhhWH.

jadenPete commented 8 years ago

That happened to me too. Sometimes this driver can be a little stubborn. A couple months ago I was sitting with a useless WNDA3100v3, however I decided to try the driver and nearly lost hope when it wouldn't connect. However the next day I rebooted and it worked!

gforge commented 8 years ago

@chriscoyfish also managed to get the driver installed but I seem to get the same SIGSEV error as you.

I also have to do a: sudo modprobe mt7601u

followed by: sudo service network-manager restart

before it works.

XiaoLiuAI commented 7 years ago

I used all the commands mentioned above. I can find the wifi setting and the detected wifi list. However, it cannot really connect to any of them. I tried to connect to hotspot of my iPhone, and it just keeps asking password. I tried to connect to a wifi without password, it always ends with "disconnected".

samus-a commented 7 years ago

uname

4.8.0-54-generic #57~16.04.1-Ubuntu x86_64

make [ok] sudo make install [ok] sudo modprobe mt7662u_sta [ok] sudo service network-manager restart

note: wlp2s0 is built-in wifi interface.

wlp2s0: deauthenticating from ::::: by local choice (Reason: 3=DEAUTH_LEAVING) IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready -->RTUSBVendorReset <--RTUSBVendorReset fw version:0.0.00 build:1 build time:201406241830__ fw for E3 IC ilm length = 59312(bytes) dlm length = 32068(bytes) loading fw........ Unexpected gfp: 0x2000000 (0x2000000). Fixing up to gfp: 0x80020 (GFP_HIGH|__GFP_ATOMIC). Fix your code! Read file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed(errCode=-14)! ERROR mt766u_sta:RTMPReadParametersHook failed, Status[=0xfffffff2] RTMP_TimerListRelease: release timer obj ffffba6c00a58440! RTMP_TimerListRelease: release timer obj ffffba6c00a584b0! RTMP_TimerListRelease: release timer obj ffffba6c00a58520! RTMP_TimerListRelease: release timer obj ffffba6c00a583d0! RTMP_TimerListRelease: release timer obj ffffba6c00a58280! RTMP_TimerListRelease: release timer obj ffffba6c00a582f0! RTMP_TimerListRelease: release timer obj ffffba6c009e9f70! RTMP_TimerListRelease: release timer obj ffffba6c009d8d78! RTMP_TimerListRelease: release timer obj ffffba6c009d8df0! RTMP_TimerListRelease: release timer obj ffffba6c009ea0e0! RTMP_TimerListRelease: release timer obj ffffba6c009e9e90! RTMP_TimerListRelease: release timer obj ffffba6c009ea070! receive cmd msg fail(-2) tx_kickout_fail_count = 0 tx_timeout_fail_count = 0 rx_receive_fail_count = 0 alloc_cmd_msg = 1 free_cmd_msg = 1 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 3965 at .../ng_a6210/Netgear-A6210-master/os/linux/../../common/rtmp_init_inf.c:491 rt28xx_init+0x50/0x600 [mt7662u_sta] Modules linked in: mt7662u_sta(OE) snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel intel_rapl arc4 x86_pkg_temp_thermal intel_powerclamp rtl8192ce coretemp rtl_pci snd_hda_codec rtl8192c_common snd_hda_core rtlwifi snd_hwdep crct10dif_pclmul mac80211 cfg80211 snd_pcm crc32_pclmul ghash_clmulni_intel snd_seq_midi snd_seq_midi_event cryptd snd_rawmidi snd_seq intel_cstate intel_rapl_perf joydev input_leds serio_raw snd_seq_device snd_timer mei_me toshiba_acpi shpchp sparse_keymap snd mei industrialio mac_hid lpc_ich toshiba_bluetooth wmi soundcore parport_pc ppdev lp parport autofs4 ums_realtek uas usb_storage i915 psmouse ahci libahci atl1c i2c_algo_bit drm_kms_helper syscopyarea video sysfillrect fjes sysimgblt fb_sys_fops drm CPU: 1 PID: 3965 Comm: NetworkManager Tainted: G W OE 4.8.0-54-generic #57~16.04.1-Ubuntu Hardware name: TOSHIBA Satellite C655/Portable PC, BIOS 1.30 11/21/2011 0000000000000286 00000000502bb6bb ffff9f5983f5f618 ffffffffa5a2e7b3 0000000000000000 0000000000000000 ffff9f5983f5f658 ffffffffa568314b 000001eb83f5f668 ffffba6c009d6000 0000000000000001 ffffffffc0a07b24 Call Trace:

[] dump_stack+0x63/0x90 [] warn+0xcb/0xf0 [] warn_slowpath_null+0x1d/0x20 [] rt28xx_init+0x50/0x600 [mt7662u_sta] [] rt28xx_open+0xc7/0x150 [mt7662u_sta] [] RTMP_COM_IoctlHandle+0x6d7/0x790 [mt7662u_sta] [] MainVirtualIF_open+0x51/0xe0 [mt7662u_sta] [] ? RT28xx_get_ether_stats+0x140/0x140 [mt7662u_sta] [] ? rt28xx_ioctl+0x80/0x80 [mt7662u_sta] [] __dev_open+0xc8/0x140 [] dev_change_flags+0x9d/0x160 [] dev_change_flags+0x29/0x70 [] do_setlink+0x693/0xce0 [] ? nla_reserve+0x41/0x50 [] ? __nla_put+0x20/0x30 [] ? _raw_read_unlock_bh+0x20/0x30 [] ? inet6_fill_ifla6_attrs+0x43d/0x460 [] ? inet6_fill_link_af+0x1a/0x30 [] ? rtnl_fill_ifinfo+0xbe5/0x10a0 [] ? kmalloc_node_track_caller+0xea/0x2c0 [] ? nla_parse+0x32/0x100 [] rtnl_newlink+0x5a3/0x890 [] ? security_capable+0x30/0x60 [] ? ns_capable_common+0x68/0x80 [] ? ns_capable+0x13/0x20 [] rtnetlink_rcv_msg+0xe6/0x220 [] ? kmalloc_node_track_caller+0x208/0x2c0 [] ? alloc_skb+0x87/0x1e0 [] ? rtnl_newlink+0x890/0x890 [] netlink_rcv_skb+0xa4/0xc0 [] rtnetlink_rcv+0x28/0x30 [] netlink_unicast+0x18c/0x240 [] netlink_sendmsg+0x2fb/0x3a0 [] ? aa_sock_msg_perm+0x61/0x150 [] socksendmsg+0x38/0x50 [] sys_sendmsg+0x2c2/0x2d0 [] ? proc_get_long.constprop.14+0x120/0x1b0 [] ? do_proc_dointvec+0x322/0x3d0 [] ? lockref_put_or_lock+0x5a/0x80 [] ? dput+0x175/0x250 [] ? mntput+0x24/0x40 [] ? fput+0x193/0x230 [] ? fget_light+0x25/0x60 [] __sys_sendmsg+0x54/0x90 [] SyS_sendmsg+0x12/0x20 [] entry_SYSCALL_64_fastpath+0x1e/0xa8 ---[ end trace 631d7aaf1251e90a ]--- !!! rt28xx init fail !!!

ifconfig wlan1

wlan1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

sudo ifconfig wlp2s0 down [ok] sudo ifconfig wlan1 up

Terminal hangs, cannot unload mt7662u_sta module, and cannot shutdown (hangs, requires hard power-off). "out-of-tree" warning/error for module is also logged.

yszheda commented 7 years ago

I encountered the same problem as @XiaoLiuAI describes.

[  754.091203] 80211> Connect bssid 1c:b7:2c:75:8e:bc
[  754.199513] PeerBeaconAtJoinAction(): HT-CtrlChannel=44, CentralChannel=>46
[  754.199516] PeerBeaconAtJoinAction(): Set CentralChannel=46
[  754.199521] AdjustChannelRelatedValue(): Input BW=1, rf_channel=46, vht_bw=1, Channel=44, vht_cent_ch=46!
[  754.262700] /media/ys/0D6911000D691100/Downloads/Netgear-A6210-master/os/linux/../../sta/rtmp_data.c:413 assert pRxBlk->wcid == BSSID_WCIDfailed
[  754.262707] [255] 1: 9c:5c:8e:b1:3e:4c, 2: 1c:b7:2c:75:8e:bc, 3:1c:b7:2c:75:8e:bc
[  754.263312] mt76x2_reinit_agc_gain:original agc_vga0 = 0x52, agc_vga1 = 0x52
[  754.263315] mt76x2_reinit_agc_gain:updated agc_vga0 = 0x52, agc_vga1 = 0x52
[  754.263476] mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x2c, hi_lna1 = 0x2c
[  754.263478] mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x2c, hi_lna1 = 0x2c
[  754.263597] original vga value(chain0) = 52
[  754.263639] original vga value(chain1) = 52
[  754.263803] mt76x2_calibration(channel = 46)
[  756.062309] Rcv Wcid(1) AddBAReq
[  756.062313] Start Seq = 00000005
[  757.125376] 80211> bss inform fail ==> 4
[  757.125385] 80211> bss inform fail ==> 4
[  757.125392] 80211> bss inform fail ==> 4
[  757.659138] mt76x2_switch_channel:: Wait until MAC 0x1200 bit0 and BBP 0x2130 become 0 > 300 times
[  757.659141] mt76x2_switch_channel:: doing IBI and core soft progress
[  774.554762] RTMP_TimerListRelease: release timer obj ffffc6aac1391f78!
[  775.061065] 80211> Connect bssid d4:ee:07:3e:f4:1c
[  775.134018] PeerBeaconAtJoinAction(): HT-CtrlChannel=13, CentralChannel=>11
[  775.134020] PeerBeaconAtJoinAction(): Set CentralChannel=11
[  775.134025] AdjustChannelRelatedValue(): Input BW=1, rf_channel=11, vht_bw=1, Channel=13, vht_cent_ch=11!
[  775.918072] PeerBeaconAtJoinAction(): HT-CtrlChannel=11, CentralChannel=>11
[  775.918075] PeerBeaconAtJoinAction(): Set CentralChannel=11
[  775.918079] AdjustChannelRelatedValue(): Input BW=0, rf_channel=11, vht_bw=1, Channel=11, vht_cent_ch=11!
[  776.264883] 80211> Connect bssid 1c:b7:2c:75:8e:b8
[  776.362993] PeerBeaconAtJoinAction(): HT-CtrlChannel=13, CentralChannel=>11
[  776.362996] PeerBeaconAtJoinAction(): Set CentralChannel=11
[  776.363001] AdjustChannelRelatedValue(): Input BW=1, rf_channel=11, vht_bw=1, Channel=13, vht_cent_ch=11!
[  777.150056] PeerBeaconAtJoinAction(): HT-CtrlChannel=11, CentralChannel=>11
[  777.150058] PeerBeaconAtJoinAction(): Set CentralChannel=11
[  777.150063] AdjustChannelRelatedValue(): Input BW=0, rf_channel=11, vht_bw=1, Channel=11, vht_cent_ch=11!
[  777.216062] ------------[ cut here ]------------
[  777.216124] WARNING: CPU: 7 PID: 231 at /build/linux-hwe-eyfT8D/linux-hwe-4.8.0/net/wireless/sme.c:724 __cfg80211_connect_result+0x3ab/0x410 [cfg80211]
[  777.216126] Modules linked in: bnep dm_crypt eeepc_wmi asus_wmi sparse_keymap mt7662u_sta(OE) cfg80211 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic intel_rapl x86_pkg_temp_thermal snd_hda_intel coretemp snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device kvm snd_timer snd input_leds joydev irqbypass soundcore hci_uart btbcm btqca crct10dif_pclmul btintel crc32_pclmul bluetooth shpchp serio_raw ghash_clmulni_intel aesni_intel mei_me aes_x86_64 mac_hid mei lrw glue_helper ablk_helper cryptd acpi_als kfifo_buf intel_lpss_acpi intel_lpss industrialio acpi_pad parport_pc ppdev lp parport autofs4 hid_generic usbhid nouveau i915 mxm_wmi ttm i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops psmouse r8169
[  777.216229]  drm ahci mii libahci wmi video i2c_hid hid fjes
[  777.216248] CPU: 7 PID: 231 Comm: kworker/u16:5 Tainted: G        W  OE   4.8.0-36-generic #36~16.04.1-Ubuntu
[  777.216251] Hardware name: System manufacturer System Product Name/B250M-KYLIN, BIOS 0808 06/16/2017
[  777.216292] Workqueue: cfg80211 cfg80211_event_work [cfg80211]
[  777.216296]  0000000000000286 00000000dadcbcd3 ffff8e2ef4fc7ca8 ffffffff9aa2d7b3
[  777.216303]  0000000000000000 0000000000000000 ffff8e2ef4fc7ce8 ffffffff9a68313b
[  777.216308]  000002d400000000 ffff8e2ef3ae1400 0000000000000000 ffff8e2ef3aef000
[  777.216314] Call Trace:
[  777.216322]  [<ffffffff9aa2d7b3>] dump_stack+0x63/0x90
[  777.216329]  [<ffffffff9a68313b>] __warn+0xcb/0xf0
[  777.216335]  [<ffffffff9a68326d>] warn_slowpath_null+0x1d/0x20
[  777.216365]  [<ffffffffc087f16b>] __cfg80211_connect_result+0x3ab/0x410 [cfg80211]
[  777.216390]  [<ffffffffc08557f4>] cfg80211_process_wdev_events+0x144/0x1b0 [cfg80211]
[  777.216414]  [<ffffffffc0855898>] cfg80211_process_rdev_events+0x38/0x70 [cfg80211]
[  777.216434]  [<ffffffffc085001e>] cfg80211_event_work+0x1e/0x30 [cfg80211]
[  777.216439]  [<ffffffff9a69d8eb>] process_one_work+0x16b/0x4a0
[  777.216442]  [<ffffffff9a69dc6b>] worker_thread+0x4b/0x500
[  777.216446]  [<ffffffff9a69dc20>] ? process_one_work+0x4a0/0x4a0
[  777.216451]  [<ffffffff9a6a4008>] kthread+0xd8/0xf0
[  777.216458]  [<ffffffff9ae9679f>] ret_from_fork+0x1f/0x40
[  777.216463]  [<ffffffff9a6a3f30>] ? kthread_create_on_node+0x1e0/0x1e0
[  777.216466] ---[ end trace afb6405f878672c0 ]---
[  777.218639] mt76x2_reinit_agc_gain:original agc_vga0 = 0x5e, agc_vga1 = 0x5e
[  777.218642] mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5e, agc_vga1 = 0x5e
[  777.218803] mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x27, hi_lna1 = 0x27
[  777.218805] mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x27, hi_lna1 = 0x27
[  777.218927] original vga value(chain0) = 5e
[  777.218969] original vga value(chain1) = 5e
[  777.219133] mt76x2_calibration(channel = 11)
[  778.216134] Rcv Wcid(1) AddBAReq
[  778.216138] Start Seq = 00000000
ghost commented 7 years ago

@chriscoyfish Same problem like you. Mine is Ubuntu 16.04.3 LTS. Kernel 4.10.0-35.

Sometimes a restart for network manager works, sometime it doesn't.. Don't know why...