shawaj
commented
3 years ago Adding your contents of your txt file here @Vestibule22 ...
{
"SX1301_conf": {
"lorawan_public": true,
"clksrc": 1, /* radio_1 provides clock to concentrator */
"antenna_gain": 0, /* antenna gain, in dBi */
"radio_0": {
"enable": true,
"type": "SX1257",
"freq": 904300000,
"rssi_offset": -166.0,
"tx_enable": true,
"tx_freq_min": 902000000,
"tx_freq_max": 928000000
},
"radio_1": {
"enable": true,
"type": "SX1257",
"freq": 905000000,
"rssi_offset": -166.0,
"tx_enable": false
},
"chan_multiSF_0": {
/* Channel 8, 903.900 Mhz */
"enable": true,
"radio": 0,
"if": -400000
},
"chan_multiSF_1": {
/* Channel 9, 904.100 Mhz */
"enable": true,
"radio": 0,
"if": -200000
},
"chan_multiSF_2": {
/* Channel 10, 904.300 Mhz */
"enable": true,
"radio": 0,
"if": 0
},
"chan_multiSF_3": {
/* Channel 11, 904.500 Mhz */
"enable": true,
"radio": 0,
"if": 200000
},
"chan_multiSF_4": {
/* Channel 12, 904.700 Mhz */
"enable": true,
"radio": 1,
"if": -300000
},
"chan_multiSF_5": {
/* Channel 13, 904.900 Mhz */
"enable": true,
"radio": 1,
"if": -100000
},
"chan_multiSF_6": {
/* Channel 14, 905.100 Mhz */
"enable": true,
"radio": 1,
"if": 100000
},
"chan_multiSF_7": {
/* Channel 15, 905.300 Mhz */
"enable": true,
"radio": 1,
"if": 300000
},
"chan_Lora_std": {
/* Channel 65 (fat channel), 912.6 Mhz */
"enable": true,
"radio": 0,
"if": 300000,
"bandwidth": 500000,
"spread_factor": 8
},
"chan_FSK": {
/* disabled */
"enable": false,
"radio": 0,
"if": 300000,
"bandwidth": 250000,
"datarate": 100000
},
"tx_lut_0": {
/* TX gain table, index 0 */
"pa_gain": 0,
"mix_gain": 8,
"rf_power": -6,
"dig_gain": 0
},
"tx_lut_1": {
/* TX gain table, index 1 */
"pa_gain": 0,
"mix_gain": 10,
"rf_power": -3,
"dig_gain": 0
},
"tx_lut_2": {
/* TX gain table, index 2 */
"pa_gain": 0,
"mix_gain": 12,
"rf_power": 0,
"dig_gain": 0
},
"tx_lut_3": {
/* TX gain table, index 3 */
"pa_gain": 1,
"mix_gain": 8,
"rf_power": 3,
"dig_gain": 0
},
"tx_lut_4": {
/* TX gain table, index 4 */
"pa_gain": 1,
"mix_gain": 10,
"rf_power": 6,
"dig_gain": 0
},
"tx_lut_5": {
/* TX gain table, index 5 */
"pa_gain": 1,
"mix_gain": 12,
"rf_power": 10,
"dig_gain": 0
},
"tx_lut_6": {
/* TX gain table, index 6 */
"pa_gain": 1,
"mix_gain": 13,
"rf_power": 11,
"dig_gain": 0
},
"tx_lut_7": {
/* TX gain table, index 7 */
"pa_gain": 2,
"mix_gain": 9,
"rf_power": 12,
"dig_gain": 0
},
"tx_lut_8": {
/* TX gain table, index 8 */
"pa_gain": 1,
"mix_gain": 15,
"rf_power": 13,
"dig_gain": 0
},
"tx_lut_9": {
/* TX gain table, index 9 */
"pa_gain": 2,
"mix_gain": 10,
"rf_power": 14,
"dig_gain": 0
},
"tx_lut_10": {
/* TX gain table, index 10 */
"pa_gain": 2,
"mix_gain": 11,
"rf_power": 16,
"dig_gain": 0
},
"tx_lut_11": {
/* TX gain table, index 11 */
"pa_gain": 3,
"mix_gain": 9,
"rf_power": 20,
"dig_gain": 0
},
"tx_lut_12": {
/* TX gain table, index 12 */
"pa_gain": 3,
"mix_gain": 10,
"rf_power": 23,
"dig_gain": 0
},
"tx_lut_13": {
/* TX gain table, index 13 */
"pa_gain": 3,
"mix_gain": 11,
"rf_power": 25,
"dig_gain": 0
},
"tx_lut_14": {
/* TX gain table, index 14 */
"pa_gain": 3,
"mix_gain": 12,
"rf_power": 26,
"dig_gain": 0
},
"tx_lut_15": {
/* TX gain table, index 15 */
"pa_gain": 3,
"mix_gain": 14,
"rf_power": 27,
"dig_gain": 0
}
},
"gateway_conf": {
"gateway_ID": "AA555A0000000000",
/* change with default server address/ports, or overwrite in local_conf.json */
"server_address": "localhost",
"serv_port_up": 1680,
"serv_port_down": 1680,
/* adjust the following parameters for your network */
"keepalive_interval": 10,
"stat_interval": 30,
"push_timeout_ms": 100,
/* forward only valid packets */
"forward_crc_valid": true,
"forward_crc_error": false,
"forward_crc_disabled": false,
"gps_tty_path": "/dev/ttyS0"
}
}
Vestibule22
US Config File.txt
Here is the config file that was posted on the Discord Channel today for RAK2245 and I noticed a few differences in that file verses your file in the repo. One additional piece was that the GPS requirements were not in the attached one.