Open zano97 opened 2 years ago
What are the specs of the SD card?
What brand is the SD card?
How have you formatted the SD card?
What Marauder firmware version are you running?
What scans did you try when you were expecting PCAPs to show up?
Do you have the SavePCAP
setting enabled?
The card is a MMAGR02GUECA-MB Samsung TransFlash 2GB microSD Flash Memory Card. I have tried to format the card both in FAT and FAT32 but gives the same problem. The firmware version is 0.9.15. Yes i have enabled SavePCAP, when mounted the system seems to recognize folders on the microsd but when i plug the microsd into the pc it's empty.
is there a SCRIPTS directory on the SD card? What scans have you tried? When you start the Marauder, do it say "Failed to initialize SD card" in the serial output?
no there is not any directory in the sd card. I have tried scanap, then also a sniffpmkid. no id does not say failed to initialize the sd card. Thanks for your help!
If there is no script directory, it sounds like the SD card is not mounting to the flipper dev board. Please send me the serial output from the time the dev board boots to when it presets the CLI prompt
Here it is:
20:17:11.534 Connected to CDC device 20:17:15.037 ESP-ROM:esp32s2-rc4-20191025 20:17:15.040 Build:Oct 25 2019 20:17:15.041 rst:0x1 (POWERON),boot:0x9 (SPI_FAST_FLASH_BOOT) 20:17:15.046 SPIWP:0xee 20:17:15.046 mode:DIO, clock div:1 20:17:15.048 load:0x3ffe6100,len:0x498 20:17:15.051 load:0x4004c000,len:0xa74 20:17:15.053 load:0x40050000,len:0x25ec 20:17:15.056 entry 0x4004c194 20:17:15.270 ESP-IDF version is: v4.4-dev-2313-gc69f0ec32 20:17:17.717 CLI Ready 20:17:17.719 20:17:17.719 @@@@@@ 20:17:17.721 @@@@@@@@ 20:17:17.726 @@@@@@@@@@@ 20:17:17.730 @@@@@@ @@@@@@ 20:17:17.736 @@@@@@@ @@@@@@@ 20:17:17.738 @@@@@@ @@@@@@ 20:17:17.741 @@@@@@@ @@@@@@@ 20:17:17.745 @@@@@@ @@@@@@ 20:17:17.753 @@@@@@@ @@@@@@@@@@@@@@@@ 20:17:17.754 @@@@@ @@@@@@@@@@@@@@@ 20:17:17.758 @@@@@ @@@@@@@ 20:17:17.762 @@@@@ @@@@@@ 20:17:17.765 @@@@@@ @@@@@@@ 20:17:17.769 @@@@@@ @@@@@@@@@@@@ 20:17:17.774 @@@@@@@ @@@@@@ 20:17:17.778 @@@@@@ @@@@@@ 20:17:17.782 @@@@@@@ @@@@@@ 20:17:17.786 @@@@@@ @@@@@@ 20:17:17.789 @@@@@@@ @@@@@@ 20:17:17.793 @@@@@@ @@@@@@ 20:17:17.797 @@@@@@@@@ 20:17:17.803 @@@@@@ 20:17:17.805 @@@@ 20:17:17.810 20:17:17.810 20:17:17.811 20:17:17.811 20:17:17.811 -------------------------------- 20:17:17.813 20:17:17.813 ESP32 Marauder 20:17:17.815 20:17:17.815 v0.9.15 20:17:17.817 20:17:17.817 By: justcallmekoko 20:17:17.820 20:17:17.820 -------------------------------- 20:17:17.824 20:17:17.824 20:17:17.824 >
Try sniffbeacon and see if there are still no files
yes also with sniffbeacon the sd card is still empty
Try to format SD card in Flipper first, worked for me.
PLEASE hel me.. i ve same problem.. my microsd seems not initialize
I've just bought 32Gb SanDisk Ultra (red one) card and even formatted via Flipper (should not matter in fact) it's not supported. Older 16Gb SanDisk Ultra (white one) right from my Flipper is supported though.
Hi, i have made the microsd card modification to the developer board, from the android interface everything seems to work well, but when i look on the microsd there are no .pcap files saved (the microsd card seem empty). Looking at the properties of the microsd card i have noticed that some space is occupied on the card even if there are no files. Can you help me with this problem? Thank you