search

justinmeiners / tcmportmapper

Automatically exported from code.google.com/p/tcmportmapper
1 stars 0 forks source link

Port Map thinks I have a different IP address #18

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1. Launch Port Map
2. Look at your IP address.

What is the expected output? What do you see instead?
Expected: 192.168.1.106.
Actual: 192.168.0.12. Not sure how that happened, as it's been weeks since
I was on my network that assigns that IP address.

What version of the product are you using? On what operating system? Intel
or PPC?
Port Map 1.0 (build 5), OS X 10.5.5 (9F17), MacBook Pro (MBP3,1).

What model and manufacturer is your Router?
Linksys WRT150n.

Please provide any additional information below.
ifconfig output:

cbowns% ifconfig                                                          

           [23:19:39 on 2008-09-11]
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
        inet6 ::1 prefixlen 128 
        inet6 fd39:ddd2:538e:bb85:21e:c2ff:fe1b:1391 prefixlen 128 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ether 00:1e:c2:1b:13:91 
        media: autoselect status: inactive
        supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP
<full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP
<full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex>
100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control>
1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT
<full-duplex,flow-control> none
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
        lladdr 00:1f:5b:ff:fe:27:43:c8 
        media: autoselect <full-duplex> status: inactive
        supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.1.106 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:1e:c2:bb:a6:26 
        media: autoselect status: active
        supported media: autoselect
vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 172.16.173.1 netmask 0xffffff00 broadcast 172.16.173.255
        ether 00:50:56:c0:00:08 
vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 172.16.24.1 netmask 0xffffff00 broadcast 172.16.24.255
        ether 00:50:56:c0:00:01

Original issue reported on code.google.com by ciphersw...@gmail.com on 12 Sep 2008 at 6:21

GoogleCodeExporter commented 8 years ago 
Same issue here:

Running the debug tool with -s command gives: 

No IGD UPnP Device found on the network !

Portmap used to work flawless before my router is a sigmax

Original comment by voorpas...@gmail.com on 29 Feb 2012 at 8:20