justintime / ST-Monoprice-Dual-Relay-Module

SmartThings device type and SmartApp for the Monoprice 11990 Dual Relay Adapter
19 stars 24 forks source link

Multiple Tiles #8

Open philkruger57 opened 7 years ago

philkruger57 commented 7 years ago

trying to incorporate 4 tiles into this project. I can get the device type to handel without any problem But When I try the associate with virtual switches it's failing I made a copy of the smart app and changed everything to switch 3 and 4 created 2 new virtual switchs Used the new smart app to map sw3 to sw4 But I get an action that looks lile sw3 is mapping to sw1 and sw4 to sw2 My end result, phase 1, is to have 8 switches mapped to 8 virtual and then create touch panel with actiontiles with these 8 virtual buttons. Sounds crazy but I have a need. FWIW I'm using the monoprice dual relay to drive 2 110v dry contact relay's. The dry contact relay pulses the garage doors, SW1 and SW2 are plain momentary (on then off) to open, close, stop doors. SW3 and SW4 are combinations that close door open door stop door at preset height for the cats SW5 and SW6 are combinations that open door and stop door at preset height for the cats SW7 and SW8 open door from cat height which needs to be 2 momentary's about 1 second apart.