keeping track of TODOs - Githubissues

jvoermans / Vibration_Logger

Logger to measure sea ice vibrations

3 stars 1 forks source link

Open jerabaul29 opened 3 years ago

jerabaul29 commented 3 years ago

@jvoermans just to keep track of TODOs, anything I forgot?

buy / add barometric pressure sensor (you will need a barometric sensor, not a diving depth sensor; let me know when you have added the sensor, and I will add to the logger + parser code)
buy / add wind sensor (let me know when you have added the sensor, and I will add to the logger + parser code)
add the statistics computation for the geoduino measurements (already a TODO JR)
add the Iridium communications (already a TODO JR)
plan for a PCB (JR + Joey)
testing the LiFePO4 solar charger (todo Joey if ok?)

Anything more?

jvoermans commented 3 years ago

Updated

buy / add barometric pressure sensor (you will need a barometric sensor, not a diving depth sensor; let me know when you have added the sensor, and I will add to the logger + parser code)
buy / add wind sensor (let me know when you have added the sensor, and I will add to the logger + parser code) (wind sensor purchased: http://cactus.io/hookups/weather/anemometer/davis/hookup-arduino-to-davis-anemometer-wind-speed)
add the statistics computation for the geoduino measurements (already a TODO JR)
add the Iridium communications (already a TODO JR)
plan for a PCB (JR + Joey)
testing the LiFePO4 solar charger (if weather ok, test 30-Nov)
test what happens if I2C disconnects abruptly (I2C has notorious freezing problems).

jvoermans commented 3 years ago

Updated

Calibrate LPS35HW pressure sensor
add the statistics computation for the geoduino measurements (I think this is done already?)
add the Iridium communications (already a TODO JR)
plan for a PCB (probs for next year deployment?)
calibrate direction 3D geophone.

Closed

Pressure sensor: https://github.com/adafruit/Adafruit_LPS35HW. Each sensor requires calibration though (offset)
Wind sensor: Davis Anemometer, http://cactus.io/hookups/weather/anemometer/davis/hookup-arduino-to-davis-anemometer-wind-speed, (~low cost but seems most resistant to cold weather according to reviews).
Solar charger is tested, works.
I2C disconnect works when resetting I2C multiplexer after failure