Open faithhopelove-jj opened 3 years ago
**I have change :
_//Device: "/dev/i2c-0",_
// thermal sensor
amg, err := amg8833.NewAMG8833(&amg8833.Opts{
Device: "/dev/i2c-1",
Mode: amg8833.AMG88xxNormalMode,
Reset: amg8833.AMG88xxInitialReset,
FPS: amg8833.AMG88xxFPS1,
})**
and I still got:
panic: write /dev/i2c-1: remote I/O error
goroutine 1 [running]: github.com/jweissig/amg8833.(*AMG88xx).SetMode(0x2410648, 0x2410600) /home/pi/go/src/github.com/jweissig/amg8833/amg8833.go:133 +0xe0 github.com/jweissig/amg8833.NewAMG8833(0x243ff5c, 0x1, 0x0, 0xb23dc) /home/pi/go/src/github.com/jweissig/amg8833/amg8833.go:83 +0xb4 main.main() /home/pi/trz-lib/sense/sense.go:26 +0x4c
PS: I am using a usb mini to USB AMG8833
Hello, I was wondering if how to fix this error below.
I am running an Raspberry 4: with go1.8.linux-armv6l.tar.gz and raspian armv71
i2c is also open:
pi@raspberrypi:~ $ sudo i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- --
$ go run sense.go panic: open /dev/i2c-0: no such file or directory
goroutine 1 [running]: main.main() /home/pi/trz-lib/sense/sense.go:33 +0x80 exit status 2
I got this error.
I hope you could help me.
Thank you