search

kamilsss655 / ESPRI

ESPRI (ESP Radio Interface) project providing extended functionalities to ham radios
Apache License 2.0
122 stars 6 forks source link

[BUG] release v.0.2.5 boot loop on TTGO T3_V1.6? #9

Closed greghall-au closed 6 months ago

greghall-au commented 6 months ago

Hi, I'd really like to see this working, but don't (yet) have the ESP32 devices you specify, only TTGO T3_V1.6, so i try anyway. But bootloop. What am I doing wrong? Maybe just wait for ESP32 Lolin Lite to arrive?

esptool.py erase_flash OK esptool.py write_flash 0x0 espri_v.0.2.5.bin ... Flash will be erased from 0x00000000 to 0x001fffff... Compressed 2097152 bytes to 687160... Wrote 2097152 bytes (687160 compressed) at 0x00000000 in 62.0 seconds (effective 270.4 kbit/s)... Hash of data verified. Leaving... Hard resetting via RTS pin...

-from serial port- rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 188777542, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:7172 load:0x40078000,len:15540 load:0x40080400,len:4 ho 8 tail 4 room 4 load:0x40080404,len:3904 entry 0x40080640 .[0;32mI (63) boot: ESP-IDF v5.2.1 2nd stage bootloader.[0m .[0;32mI (63) boot: compile time Mar 19 2024 11:00:20.[0m .[0;32mI (63) boot: Multicore bootloader.[0m .[0;32mI (68) boot: chip revision: v1.0.[0m .[0;32mI (71) boot.esp32: SPI Speed : 40MHz.[0m .[0;32mI (76) boot.esp32: SPI Mode : DIO.[0m .[0;32mI (81) boot.esp32: SPI Flash Size : 2MB.[0m .[0;33mW (85) boot.esp32: PRO CPU has been reset by WDT..[0m .[0;33mW (91) boot.esp32: WDT reset info: PRO CPU PC=0x400819f1.[0m .[0;33mW (97) boot.esp32: WDT reset info: APP CPU PC=0x40080340.[0m .[0;32mI (103) boot: Enabling RNG early entropy source....[0m .[0;32mI (108) boot: Partition Table:.[0m .[0;32mI (112) boot: ## Label Usage Type ST Offset Length.[0m .[0;32mI (119) boot: 0 nvs WiFi data 01 02 00009000 00006000.[0m .[0;32mI (127) boot: 1 phy_init RF data 01 01 0000f000 00001000.[0m .[0;32mI (134) boot: 2 factory factory app 00 00 00010000 00100000.[0m .[0;32mI (142) boot: 3 storage Unknown data 01 82 00110000 000f0000.[0m .[0;32mI (149) boot: End of partition table.[0m .[0;32mI (154) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=28eb4h (167604) map.[0m .[0;32mI (220) esp_image: segment 1: paddr=00038edc vaddr=3ffb0000 size=03fb0h ( 16304) load.[0m .[0;32mI (226) esp_image: segment 2: paddr=0003ce94 vaddr=40080000 size=03184h ( 12676) load.[0m .[0;32mI (231) esp_image: segment 3: paddr=00040020 vaddr=400d0020 size=a0b14h (658196) map.[0m .[0;32mI (459) esp_image: segment 4: paddr=000e0b3c vaddr=40083184 size=1542ch ( 87084) load.[0m .[0;32mI (506) boot: Loaded app from partition at offset 0x10000.[0m .[0;32mI (506) boot: Disabling RNG early entropy source....[0m .[0;32mI (517) cpu_start: Multicore app.[0m .[0;32mI (526) cpu_start: Pro cpu start user code.[0m .[0;32mI (527) cpu_start: cpu freq: 160000000 Hz.[0m .[0;32mI (527) cpu_start: Application information:.[0m .[0;32mI (530) cpu_start: Project name: ESPRI.[0m .[0;32mI (534) cpu_start: App version: v.0.2.5.[0m .[0;32mI (539) cpu_start: Compile time: Mar 19 2024 11:00:13.[0m .[0;32mI (545) cpu_start: ELF file SHA256: 90da6e513....[0m .[0;32mI (551) cpu_start: ESP-IDF: v5.2.1.[0m .[0;32mI (556) cpu_start: Min chip rev: v0.0.[0m .[0;32mI (560) cpu_start: Max chip rev: v3.99 .[0m .[0;32mI (565) cpu_start: Chip rev: v1.0.[0m .[0;32mI (570) heap_init: Initializing. RAM available for dynamic allocation:.[0m .[0;32mI (577) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM.[0m .[0;32mI (583) heap_init: At 3FFB8168 len 00027E98 (159 KiB): DRAM.[0m .[0;32mI (589) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM.[0m .[0;32mI (596) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM.[0m .[0;32mI (602) heap_init: At 400985B0 len 00007A50 (30 KiB): IRAM.[0m .[0;32mI (610) spi_flash: detected chip: gd.[0m .[0;32mI (613) spi_flash: flash io: dio.[0m .[0;33mW (616) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header..[0m .[0;32mI (631) main_task: Started on CPU0.[0m .[0;32mI (641) main_task: Calling app_main().[0m .[0;32mI (641) HW/SPIFFS: Initializing SPIFFS.[0m .[0;32mI (751) HW/SPIFFS: Partition: /storage size: total: 896321, used: 341360.[0m ets Jun 8 2016 00:22:57

kamilsss655 commented 6 months ago
  1. Welcome :)
  2. Please fix formatting of this issue.
  3. It technically should work with TTGO boards, I tried with earlier version 1.3 and it worked. Unless there are some device specific GPIO pins that cause the reset.
  4. Your output log is too short, so there is no reason for reset included, so I cannot help much. Try adding the full log to the issue.
ErikS-web commented 6 months ago

How did you flash the ESP-32 ?

I used ESP-Launchpad (using web browser)

But beware to change the Flash address from 0x10000 to 0x00000 befrore pressing Program

Knipsel

ErikS-web commented 6 months ago

Here my logging from programming the version 0.2.5

and No problems....

esptool.js Serial port WebSerial VendorID 0x1a86 ProductID 0x7523 Connecting.... Detecting chip type... ESP32 Chip is ESP32-D0WDQ6 (revision 1) Features: Wi-Fi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None Crystal is 40MHz MAC: 08:f9:e0:e4:16:74 Uploading stub... Running stub... Stub running... Changing baudrate to 921600 Changed Manufacturer: 5e Device: 4016 Detected flash size: 4MB Compressed 2097152 bytes to 687160... Writing at 0x0... (2%) Writing at 0x77c5... (4%) Writing at 0x1d624... (7%) Writing at 0x27ad9... (9%) Writing at 0x2defe... (11%) Writing at 0x342fa... (14%) Writing at 0x3f7b8... (16%) Writing at 0x4525e... (19%) Writing at 0x4b11d... (21%) Writing at 0x50c1c... (23%) Writing at 0x56cf0... (26%) Writing at 0x5ccc3... (28%) Writing at 0x629b8... (30%) Writing at 0x686e7... (33%) Writing at 0x6da99... (35%) Writing at 0x72e39... (38%) Writing at 0x782ea... (40%) Writing at 0x7d722... (42%) Writing at 0x82dcf... (45%) Writing at 0x885de... (47%) Writing at 0x8e4b8... (50%) Writing at 0x93be0... (52%) Writing at 0x99818... (54%) Writing at 0x9f52e... (57%) Writing at 0xa4e98... (59%) Writing at 0xaa8df... (61%) Writing at 0xb0660... (64%) Writing at 0xb756b... (66%) Writing at 0xbce50... (69%) Writing at 0xc28ae... (71%) Writing at 0xc838c... (73%) Writing at 0xd1b6b... (76%) Writing at 0xda907... (78%) Writing at 0xe05eb... (80%) Writing at 0xe6164... (83%) Writing at 0xec3cf... (85%) Writing at 0xf1bbd... (88%) Writing at 0x113906... (90%) Writing at 0x1288a0... (92%) Writing at 0x13d4f4... (95%) Writing at 0x14c42e... (97%) Writing at 0x15cedf... (100%) Wrote 2097152 bytes (687160 compressed) at 0x0 in 16.196 seconds. Leaving...

### RESET DEVICE

ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:7172 load:0x40078000,len:15540 load:0x40080400,len:4 ho 8 tail 4 room 4 load:0x40080404,len:3904 entry 0x40080640 I (31) boot: ESP-IDF v5.2.1 2nd stage bootloader I (31) boot: compile time Mar 19 2024 11:00:20 I (31) boot: Multicore bootloader I (35) boot: chip revision: v1.1 I (39) boot.esp32: SPI Speed : 40MHz I (43) boot.esp32: SPI Mode : DIO I (48) boot.esp32: SPI Flash Size : 2MB I (52) boot: Enabling RNG early entropy source... I (58) boot: Partition Table: I (61) boot: ## Label Usage Type ST Offset Length I (69) boot: 0 nvs WiFi data 01 02 00009000 00006000 I (76) boot: 1 phy_init RF data 01 01 0000f000 00001000 I (84) boot: 2 factory factory app 00 00 00010000 00100000 I (91) boot: 3 storage Unknown data 01 82 00110000 000f0000 I (99) boot: End of partition table I (103) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=28eb4h (167604) map I (169) esp_image: segment 1: paddr=00038edc vaddr=3ffb0000 size=03fb0h ( 16304) load I (175) esp_image: segment 2: paddr=0003ce94 vaddr=40080000 size=03184h ( 12676) load I (180) esp_image: segment 3: paddr=00040020 vaddr=400d0020 size=a0b14h (658196) map I (409) esp_image: segment 4: paddr=000e0b3c vaddr=40083184 size=1542ch ( 87084) load I (455) boot: Loaded app from partition at offset 0x10000 I (455) boot: Disabling RNG early entropy source... I (467) cpu_start: Multicore app I (475) cpu_start: Pro cpu start user code I (476) cpu_start: cpu freq: 160000000 Hz I (476) cpu_start: Application information: I (479) cpu_start: Project name: ESPRI I (483) cpu_start: App version: v.0.2.5 I (488) cpu_start: Compile time: Mar 19 2024 11:00:13 I (494) cpu_start: ELF file SHA256: 90da6e513... I (500) cpu_start: ESP-IDF: v5.2.1 I (505) cpu_start: Min chip rev: v0.0 I (509) cpu_start: Max chip rev: v3.99 I (514) cpu_start: Chip rev: v1.1 I (519) heap_init: Initializing. RAM available for dynamic allocation: I (526) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM I (532) heap_init: At 3FFB8168 len 00027E98 (159 KiB): DRAM I (538) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM I (545) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM I (551) heap_init: At 400985B0 len 00007A50 (30 KiB): IRAM I (559) spi_flash: detected chip: generic I (562) spi_flash: flash io: dio W (566) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header. I (580) main_task: Started on CPU0 I (590) main_task: Calling app_main() I (590) HW/SPIFFS: Initializing SPIFFS I (700) HW/SPIFFS: Partition: /storage size: total: 896321, used: 340858 E (750) SETTINGS: No config file found. W (750) SETTINGS: Performing factory reset. ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:7172 load:0x40078000,len:15540 load:0x40080400,len:4 ho 8 tail 4 room 4 load:0x40080404,len:3904 entry 0x40080640 I (30) boot: ESP-IDF v5.2.1 2nd stage bootloader I (31) boot: compile time Mar 19 2024 11:00:20 I (31) boot: Multicore bootloader I (35) boot: chip revision: v1.1 I (39) boot.esp32: SPI Speed : 40MHz I (44) boot.esp32: SPI Mode : DIO I (48) boot.esp32: SPI Flash Size : 2MB I (53) boot: Enabling RNG early entropy source... I (58) boot: Partition Table: I (62) boot: ## Label Usage Type ST Offset Length I (69) boot: 0 nvs WiFi data 01 02 00009000 00006000 I (76) boot: 1 phy_init RF data 01 01 0000f000 00001000 I (84) boot: 2 factory factory app 00 00 00010000 00100000 I (91) boot: 3 storage Unknown data 01 82 00110000 000f0000 I (99) boot: End of partition table I (103) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=28eb4h (167604) map I (169) esp_image: segment 1: paddr=00038edc vaddr=3ffb0000 size=03fb0h ( 16304) load I (175) esp_image: segment 2: paddr=0003ce94 vaddr=40080000 size=03184h ( 12676) load I (181) esp_image: segment 3: paddr=00040020 vaddr=400d0020 size=a0b14h (658196) map I (409) esp_image: segment 4: paddr=000e0b3c vaddr=40083184 size=1542ch ( 87084) load I (455) boot: Loaded app from partition at offset 0x10000 I (455) boot: Disabling RNG early entropy source... I (467) cpu_start: Multicore app I (476) cpu_start: Pro cpu start user code I (476) cpu_start: cpu freq: 160000000 Hz I (476) cpu_start: Application information: I (479) cpu_start: Project name: ESPRI I (484) cpu_start: App version: v.0.2.5 I (488) cpu_start: Compile time: Mar 19 2024 11:00:13 I (495) cpu_start: ELF file SHA256: 90da6e513... I (500) cpu_start: ESP-IDF: v5.2.1 I (505) cpu_start: Min chip rev: v0.0 I (509) cpu_start: Max chip rev: v3.99 I (514) cpu_start: Chip rev: v1.1 I (519) heap_init: Initializing. RAM available for dynamic allocation: I (526) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM I (532) heap_init: At 3FFB8168 len 00027E98 (159 KiB): DRAM I (539) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM I (545) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM I (551) heap_init: At 400985B0 len 00007A50 (30 KiB): IRAM I (559) spi_flash: detected chip: generic I (562) spi_flash: flash io: dio W (566) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header. I (580) main_task: Started on CPU0 I (590) main_task: Calling app_main() I (590) HW/SPIFFS: Initializing SPIFFS I (700) HW/SPIFFS: Partition: /storage size: total: 896321, used: 341360 I (740) HW/WIFI: Initializing in AP mode. I (760) wifi:wifi driver task: 3ffc1770, prio:23, stack:6656, core=0 I (760) wifi:wifi firmware version: a9f5b59 I (760) wifi:wifi certification version: v7.0 I (760) wifi:config NVS flash: enabled I (760) wifi:config nano formating: disabled I (770) wifi:Init data frame dynamic rx buffer num: 32 I (770) wifi:Init static rx mgmt buffer num: 5 I (780) wifi:Init management short buffer num: 32 I (780) wifi:Init dynamic tx buffer num: 32 I (780) wifi:Init static rx buffer size: 1600 I (790) wifi:Init static rx buffer num: 10 I (790) wifi:Init dynamic rx buffer num: 32 I (800) wifi_init: rx ba win: 6 I (800) wifi_init: tcpip mbox: 32 I (800) wifi_init: udp mbox: 6 I (810) wifi_init: tcp mbox: 6 I (810) wifi_init: tcp tx win: 5760 I (810) wifi_init: tcp rx win: 5760 I (820) wifi_init: tcp mss: 1440 I (820) wifi_init: WiFi IRAM OP enabled I (830) wifi_init: WiFi RX IRAM OP enabled I (1100) phy_init: phy_version 4791,2c4672b,Dec 20 2023,16:06:06 W (1100) phy_init: failed to load RF calibration data (0x1102), falling back to full calibration I (1190) wifi:mode : softAP (08:f9:e0:e4:16:75) I (1200) wifi:Total power save buffer number: 16 I (1200) wifi:Init max length of beacon: 752/752 I (1200) wifi:Init max length of beacon: 752/752 I (1200) HW/WIFI: wifi_init_softap finished. SSID:NOKIA-3K9N4H1 password:mypassword channel:1 I (1200) esp_netif_lwip: DHCP server started on interface WIFI_AP_DEF with IP: 192.168.4.1 I (1220) HW/HTTP_SERVER: Starting HTTP Server on port: '80' I (1230) gpio: GPIO[36]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (1240) HW/AUDIO: Audio output initialized on pin: 18 I (1240) main_task: Returned from app_main() I (1250) gpio: GPIO[22]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (1250) HW/LED: Turning on the LED ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:7172 load:0x40078000,len:15540 load:0x40080400,len:4 ho 8 tail 4 room 4 load:0x40080404,len:3904 entry 0x40080640 I (31) boot: ESP-IDF v5.2.1 2nd stage bootloader I (31) boot: compile time Mar 19 2024 11:00:20 I (31) boot: Multicore bootloader I (35) boot: chip revision: v1.1 I (39) boot.esp32: SPI Speed : 40MHz I (43) boot.esp32: SPI Mode : DIO I (48) boot.esp32: SPI Flash Size : 2MB I (52) boot: Enabling RNG early entropy source... I (58) boot: Partition Table: I (61) boot: ## Label Usage Type ST Offset Length I (69) boot: 0 nvs WiFi data 01 02 00009000 00006000 I (76) boot: 1 phy_init RF data 01 01 0000f000 00001000 I (84) boot: 2 factory factory app 00 00 00010000 00100000 I (91) boot: 3 storage Unknown data 01 82 00110000 000f0000 I (99) boot: End of partition table I (103) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=28eb4h (167604) map I (169) esp_image: segment 1: paddr=00038edc vaddr=3ffb0000 size=03fb0h ( 16304) load I (175) esp_image: segment 2: paddr=0003ce94 vaddr=40080000 size=03184h ( 12676) load I (180) esp_image: segment 3: paddr=00040020 vaddr=400d0020 size=a0b14h (658196) map I (409) esp_image: segment 4: paddr=000e0b3c vaddr=40083184 size=1542ch ( 87084) load I (455) boot: Loaded app from partition at offset 0x10000 I (455) boot: Disabling RNG early entropy source... I (467) cpu_start: Multicore app I (475) cpu_start: Pro cpu start user code I (475) cpu_start: cpu freq: 160000000 Hz I (476) cpu_start: Application information: I (479) cpu_start: Project name: ESPRI I (483) cpu_start: App version: v.0.2.5 I (488) cpu_start: Compile time: Mar 19 2024 11:00:13 I (494) cpu_start: ELF file SHA256: 90da6e513... I (500) cpu_start: ESP-IDF: v5.2.1 I (505) cpu_start: Min chip rev: v0.0 I (509) cpu_start: Max chip rev: v3.99 I (514) cpu_start: Chip rev: v1.1 I (519) heap_init: Initializing. RAM available for dynamic allocation: I (526) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM I (532) heap_init: At 3FFB8168 len 00027E98 (159 KiB): DRAM I (538) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM I (545) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM I (551) heap_init: At 400985B0 len 00007A50 (30 KiB): IRAM I (559) spi_flash: detected chip: generic I (562) spi_flash: flash io: dio W (566) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header. I (580) main_task: Started on CPU0 I (590) main_task: Calling app_main() I (590) HW/SPIFFS: Initializing SPIFFS I (700) HW/SPIFFS: Partition: /storage size: total: 896321, used: 341360 I (750) HW/WIFI: Initializing in AP mode. I (770) wifi:wifi driver task: 3ffc17b0, prio:23, stack:6656, core=0 I (780) wifi:wifi firmware version: a9f5b59 I (780) wifi:wifi certification version: v7.0 I (780) wifi:config NVS flash: enabled I (780) wifi:config nano formating: disabled I (780) wifi:Init data frame dynamic rx buffer num: 32 I (790) wifi:Init static rx mgmt buffer num: 5 I (790) wifi:Init management short buffer num: 32 I (790) wifi:Init dynamic tx buffer num: 32 I (800) wifi:Init static rx buffer size: 1600 I (800) wifi:Init static rx buffer num: 10 I (810) wifi:Init dynamic rx buffer num: 32 I (810) wifi_init: rx ba win: 6 I (810) wifi_init: tcpip mbox: 32 I (820) wifi_init: udp mbox: 6 I (820) wifi_init: tcp mbox: 6 I (830) wifi_init: tcp tx win: 5760 I (830) wifi_init: tcp rx win: 5760 I (830) wifi_init: tcp mss: 1440 I (840) wifi_init: WiFi IRAM OP enabled I (840) wifi_init: WiFi RX IRAM OP enabled I (850) phy_init: phy_version 4791,2c4672b,Dec 20 2023,16:06:06 I (940) wifi:mode : softAP (08:f9:e0:e4:16:75) I (950) wifi:Total power save buffer number: 16 I (950) wifi:Init max length of beacon: 752/752 I (950) wifi:Init max length of beacon: 752/752 I (950) HW/WIFI: wifi_init_softap finished. SSID:NOKIA-3K9N4H1 password:mypassword channel:1 I (950) esp_netif_lwip: DHCP server started on interface WIFI_AP_DEF with IP: 192.168.4.1 I (970) HW/HTTP_SERVER: Starting HTTP Server on port: '80' I (980) gpio: GPIO[36]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (990) HW/AUDIO: Audio output initialized on pin: 18 I (990) main_task: Returned from app_main() I (1000) gpio: GPIO[22]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 I (1000) HW/LED: Turning on the LED I (3020) HW/LED: Turning off the LED I (5030) HW/LED: Turning on the LED I (7040) HW/LED: Turning off the LED I (9040) HW/LED: Turning on the LED I (11050) HW/LED: Turning off the LED I (13060) HW/LED: Turning on the LED I (15070) HW/LED: Turning off the LED I (15130) APP/MORSE_CODE: Transmitted: - . ... - / .--- ..- ... - / .- / - . ... - I (17080) HW/LED: Turning on the LED I (19080) HW/LED: Turning off the LED I (21090) HW/LED: Turning on the LED I (23100) HW/LED: Turning off the LED I (25110) HW/LED: Turning on the LED I (27120) HW/LED: Turning off the LED I (29130) HW/LED: Turning on the LED I (31140) HW/LED: Turning off the LED I (33150) HW/LED: Turning on the LED I (34270) APP/MORSE_CODE: Transmitted: - . ... - / .--- ..- ... - / .- / - . ... - I (35150) HW/LED: Turning off the LED I (37160) HW/LED: Turning on the LED I (39170) HW/LED: Turning off the LED I (41180) HW/LED: Turning on the LED I (43190) HW/LED: Turning off the LED I (45190) HW/LED: Turning on the LED I (47200) HW/LED: Turning off the LED I (49210) HW/LED: Turning on the LED I (51220) HW/LED: Turning off the LED I (53230) HW/LED: Turning on the LED

greghall-au commented 6 months ago

Thanks for the guidance. I used the ESP-Launchpad, same result with the TTGP T3_V1.6, but it works nicely on a Heltec V2. Now, where was that diagram of the connex to the Kenwood plugs? Cheers, and I'm looking fwd to the project developing.

ErikS-web commented 6 months ago

Look here https://github.com/ludwich66/Quansheng_UV-K5_Wiki/wiki/Programming-Cable

Cable-prog-Mic

or

Workaround is an elco in speaker-line

So I have made this

ESPRI-connect