search

karamba3d / K3D_tests

Unit tests for the Finite Element Toolkit Karamba3D
https://www.karamba3d.com
MIT License
30 stars 5 forks source link

Link not wroking #2

Closed MaxSustainableSolutions closed 3 years ago

MaxSustainableSolutions commented 3 years ago

Hi,

I tried to run the project, but the link to karamba.dll and karambaCommon.dll is offline. Is there another place where I can get the dll's?

Kind Regards, Max

karamba3d commented 3 years ago

Hi Max, sorry for my late reply. My notification settings were not correct. I updated the repo to Karamba3D 2.0.0 and the link is not necessary any more. -- Clemens

MaxSustainableSolutions commented 3 years ago

Hi Clemens,

Thanks, yes figured that out and got it working inside visual studio. I am currently working on a plugin to analyse modular timber construction. But I have another question regard the scripting with Karamba: Is it possible in the future to create line connections with a stiffness?

Kind regards, Max

Op wo 27 jan. 2021 om 11:05 schreef Karamba3D notifications@github.com:

Hi Max, sorry for my late reply. My notification settings were not correct. I updated the repo to Karamba3D 2.0.0 and the link is not necessary any more. -- Clemens

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/karamba3d/K3D_tests/issues/2#issuecomment-768176165, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALJSVMSRIFPEDV6L3AK3HWTS37QOPANCNFSM4S5R4PNQ .

karamba3d commented 3 years ago

Hi Max, with version 2.0.0 it is possible to specify line joints which have a stiffness. The functionality is already there and can be tested (see https://github.com/karamba3d/K3D_NightlyBuilds/releases).

Take a look at the updated unit-tests project (https://github.com/karamba3d/K3D_tests). There is a deactivated test in the folder 'Joints' which shows how it works. The test is deactivated because I am still working on it: the static condensation procedure used results in unprecise results for natural vibrations and buckling calculations in case of beam calculations.

I hope to have it within the next one ore two weeks.

[https://avatars3.githubusercontent.com/u/30176575?s=400&v=4]https://github.com/karamba3d/K3D_NightlyBuilds/releases Releases · karamba3d/K3D_NightlyBuilds · GitHubhttps://github.com/karamba3d/K3D_NightlyBuilds/releases NightlyBuilds version of Karamba3d . Contribute to karamba3d/K3D_NightlyBuilds development by creating an account on GitHub. github.com

best, Clemens cp@karamba3d.commailto:cp@karamba3d.com

Karamba3D Clemens Preisinger A-1010 Vienna www.karamba3d.comhttps://www.karamba3d.com LinkedInhttps://www.linkedin.com/company/karamba3d | Instagramhttps://www.instagram.com/karamba3d/ | Youtubehttps://www.youtube.com/c/karamba3d

From: MaxSustainableSolutions notifications@github.com Sent: Wednesday, January 27, 2021 11:38 AM To: karamba3d/K3D_tests K3D_tests@noreply.github.com Cc: info info@karamba3d.com; State change state_change@noreply.github.com Subject: Re: [karamba3d/K3D_tests] Link not wroking (#2)

Hi Clemens,

Thanks, yes figured that out and got it working inside visual studio. I am currently working on a plugin to analyse modular timber construction. But I have another question regard the scripting with Karamba: Is it possible in the future to create line connections with a stiffness?

Kind regards, Max

Op wo 27 jan. 2021 om 11:05 schreef Karamba3D notifications@github.com:

Hi Max, sorry for my late reply. My notification settings were not correct. I updated the repo to Karamba3D 2.0.0 and the link is not necessary any more. -- Clemens

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/karamba3d/K3D_tests/issues/2#issuecomment-768176165, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALJSVMSRIFPEDV6L3AK3HWTS37QOPANCNFSM4S5R4PNQ .

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHubhttps://github.com/karamba3d/K3D_tests/issues/2#issuecomment-768195036, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AHGHKP3ZVXT4LEA2KHN3Y33S37UIXANCNFSM4S5R4PNQ.

MaxSustainableSolutions commented 3 years ago

Hi Clemens,

The nightly build works like a charm. I faced another problem by modelling the timber structure regard the non-linear springs (See figures), haven't found an option yet in Karamba to implement this. A workaround would be to implement an iterative process and indicate the compression/tension points. Do you have another suggestion to solve this problem?

Kind regards, Max

[image: image.png] [image: image.png]

Op di 2 feb. 2021 om 09:59 schreef Karamba3D notifications@github.com:

Hi Max, with version 2.0.0 it is possible to specify line joints which have a stiffness. The functionality is already there and can be tested (see https://github.com/karamba3d/K3D_NightlyBuilds/releases).

Take a look at the updated unit-tests project ( https://github.com/karamba3d/K3D_tests). There is a deactivated test in the folder 'Joints' which shows how it works. The test is deactivated because I am still working on it: the static condensation procedure used results in unprecise results for natural vibrations and buckling calculations in case of beam calculations.

I hope to have it within the next one ore two weeks.

[https://avatars3.githubusercontent.com/u/30176575?s=400&v=4]< https://github.com/karamba3d/K3D_NightlyBuilds/releases> Releases · karamba3d/K3D_NightlyBuilds · GitHub< https://github.com/karamba3d/K3D_NightlyBuilds/releases> NightlyBuilds version of Karamba3d . Contribute to karamba3d/K3D_NightlyBuilds development by creating an account on GitHub. github.com

best, Clemens cp@karamba3d.commailto:cp@karamba3d.com

Karamba3D Clemens Preisinger A-1010 Vienna www.karamba3d.comhttps://www.karamba3d.com LinkedInhttps://www.linkedin.com/company/karamba3d | Instagram< https://www.instagram.com/karamba3d/> | Youtube< https://www.youtube.com/c/karamba3d>

From: MaxSustainableSolutions notifications@github.com Sent: Wednesday, January 27, 2021 11:38 AM To: karamba3d/K3D_tests K3D_tests@noreply.github.com Cc: info info@karamba3d.com; State change < state_change@noreply.github.com> Subject: Re: [karamba3d/K3D_tests] Link not wroking (#2)

Hi Clemens,

Thanks, yes figured that out and got it working inside visual studio. I am currently working on a plugin to analyse modular timber construction. But I have another question regard the scripting with Karamba: Is it possible in the future to create line connections with a stiffness?

Kind regards, Max

Op wo 27 jan. 2021 om 11:05 schreef Karamba3D notifications@github.com:

Hi Max, sorry for my late reply. My notification settings were not correct. I updated the repo to Karamba3D 2.0.0 and the link is not necessary any more. -- Clemens

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <https://github.com/karamba3d/K3D_tests/issues/2#issuecomment-768176165 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ALJSVMSRIFPEDV6L3AK3HWTS37QOPANCNFSM4S5R4PNQ

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub< https://github.com/karamba3d/K3D_tests/issues/2#issuecomment-768195036>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHGHKP3ZVXT4LEA2KHN3Y33S37UIXANCNFSM4S5R4PNQ

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/karamba3d/K3D_tests/issues/2#issuecomment-771478669, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALJSVMVWQC5TIYWCMD6NCQDS465GXANCNFSM4S5R4PNQ .

karamba3d commented 3 years ago

Hi Max, non-linear joint stiffness is not yet implemented in Karamba3D 2.0.0 It could be done like you indicate. In order to get reliable convergence and correct results it is necessary to implement an incremental iterative procedure which can not be easily implemented in from C# with the C++ api currently available for the Karamba3D calculation core.

best, Clemens cp@karamba3d.commailto:cp@karamba3d.com

Karamba3D Clemens Preisinger A-1010 Vienna www.karamba3d.comhttps://www.karamba3d.com LinkedInhttps://www.linkedin.com/company/karamba3d | Instagramhttps://www.instagram.com/karamba3d/ | Youtubehttps://www.youtube.com/c/karamba3d

From: MaxSustainableSolutions notifications@github.com Sent: Tuesday, February 16, 2021 10:14 AM To: karamba3d/K3D_tests K3D_tests@noreply.github.com Cc: info info@karamba3d.com; State change state_change@noreply.github.com Subject: Re: [karamba3d/K3D_tests] Link not wroking (#2)

Hi Clemens,

The nightly build works like a charm. I faced another problem by modelling the timber structure regard the non-linear springs (See figures), haven't found an option yet in Karamba to implement this. A workaround would be to implement an iterative process and indicate the compression/tension points. Do you have another suggestion to solve this problem?

Kind regards, Max

[image: image.png] [image: image.png]

Op di 2 feb. 2021 om 09:59 schreef Karamba3D notifications@github.com:

Hi Max, with version 2.0.0 it is possible to specify line joints which have a stiffness. The functionality is already there and can be tested (see https://github.com/karamba3d/K3D_NightlyBuilds/releases).

Take a look at the updated unit-tests project ( https://github.com/karamba3d/K3D_tests). There is a deactivated test in the folder 'Joints' which shows how it works. The test is deactivated because I am still working on it: the static condensation procedure used results in unprecise results for natural vibrations and buckling calculations in case of beam calculations.

I hope to have it within the next one ore two weeks.

[https://avatars3.githubusercontent.com/u/30176575?s=400&v=4]< https://github.com/karamba3d/K3D_NightlyBuilds/releases> Releases · karamba3d/K3D_NightlyBuilds · GitHub< https://github.com/karamba3d/K3D_NightlyBuilds/releases> NightlyBuilds version of Karamba3d . Contribute to karamba3d/K3D_NightlyBuilds development by creating an account on GitHub. github.com

best, Clemens cp@karamba3d.commailto:cp@karamba3d.com

Karamba3D Clemens Preisinger A-1010 Vienna www.karamba3d.comhttps://www.karamba3d.com LinkedInhttps://www.linkedin.com/company/karamba3d | Instagram< https://www.instagram.com/karamba3d/> | Youtube< https://www.youtube.com/c/karamba3d>

From: MaxSustainableSolutions notifications@github.com Sent: Wednesday, January 27, 2021 11:38 AM To: karamba3d/K3D_tests K3D_tests@noreply.github.com Cc: info info@karamba3d.com; State change < state_change@noreply.github.com> Subject: Re: [karamba3d/K3D_tests] Link not wroking (#2)

Hi Clemens,

Thanks, yes figured that out and got it working inside visual studio. I am currently working on a plugin to analyse modular timber construction. But I have another question regard the scripting with Karamba: Is it possible in the future to create line connections with a stiffness?

Kind regards, Max

Op wo 27 jan. 2021 om 11:05 schreef Karamba3D notifications@github.com:

Hi Max, sorry for my late reply. My notification settings were not correct. I updated the repo to Karamba3D 2.0.0 and the link is not necessary any more. -- Clemens

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <https://github.com/karamba3d/K3D_tests/issues/2#issuecomment-768176165 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ALJSVMSRIFPEDV6L3AK3HWTS37QOPANCNFSM4S5R4PNQ

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub< https://github.com/karamba3d/K3D_tests/issues/2#issuecomment-768195036>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/AHGHKP3ZVXT4LEA2KHN3Y33S37UIXANCNFSM4S5R4PNQ

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/karamba3d/K3D_tests/issues/2#issuecomment-771478669, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALJSVMVWQC5TIYWCMD6NCQDS465GXANCNFSM4S5R4PNQ .

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHubhttps://github.com/karamba3d/K3D_tests/issues/2#issuecomment-779696279, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AHGHKP3MPNGWEAS7XVYOQBTS7IZQHANCNFSM4S5R4PNQ.