karawin / Ka-Radio

A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
Other
428 stars 91 forks source link

Unable to see the SSID network #89

Closed ChristopheBaeyens closed 3 years ago

ChristopheBaeyens commented 3 years ago

I'm searching for days now in the hope of getting this to work. But after loading the BIN files I discovered no new network. Checked the web tried some other combinations but had no luck. Started from this site https://www.instructables.com/Wifi-Webradio-With-ESP8266-and-VS1053/ But finally used the loader as mentioned in the readme here but still no progress. Schermafbeelding 2020-12-09 152955

Just, checked my esp8266 with a simple led test via the intranet and it is still working.

ChristopheBaeyens commented 3 years ago

I just rebooted due to a windows update, and this I did not expect, I can see the SSID now, but for the moment still no sound...

ChristopheBaeyens commented 3 years ago

Unable to connect to the site anymore. Flashed the board / Erased it / Redownloaded all bin's, The SSID is comming up but unable to connect to the site http://192.164.4.1/ anymore.... For the moment also removed all cables. But nothing I do seems to get the site back up... Does someone has any sugestions?

pilnikov commented 3 years ago

unable to connect to the site http://192.164.4.1/ anymore.... Does someone has any sugestions?

You must connect to 192.168.4.1

ChristopheBaeyens commented 3 years ago

Ok must have been tired yesterday, thx for your feedback. Had again some problems with one of my laptops USB ports, strange, updating the board works with 1 usb port but to get the board working I had to switch to another USB port. I finally got the project working, but still have a buffering problem. I also do not understand why A0 has to be connected to the ground (i did not do it for the moment), it seems strange as the board is already connected to the ground.

ChristopheBaeyens commented 3 years ago

Did some search, and I suppose I need extra ram for buffering. Would it be possible to get some references of external ramboards, if possible without the need of soldering?

pilnikov commented 3 years ago

i know chip only, no ramboards

ChristopheBaeyens commented 3 years ago

Hi Alex,

How did you solve the buffer problem, or did you only use those radio’s without this type of problem?

Christophe.

Van: Alex Pilnikov notifications@github.com Verzonden: vrijdag 11 december 2020 9:50 Aan: karawin/Ka-Radio Ka-Radio@noreply.github.com CC: ChristopheBaeyens christophe.baeyens@telenet.be; Author author@noreply.github.com Onderwerp: Re: [karawin/Ka-Radio] Unable to see the SSID network (#89)

i know chip only, no ramboards

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/karawin/Ka-Radio/issues/89#issuecomment-743061264 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ASB3FCTIIYJOZA6YWILTKRDSUHMNFANCNFSM4UTSG3ZA . https://github.com/notifications/beacon/ASB3FCQB4OLLMEHM5MFDA3DSUHMNFA5CNFSM4UTSG3ZKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOFRFDOEA.gif

pilnikov commented 3 years ago

i use esp32, but i have some problem even with 4mb ext ram

pilnikov commented 3 years ago

W (18910) webclient: Stream found!!!! Start player

CLI.PLAYING

CLI.META#: Nina - The reason is you

I (22660) vs1053: Wait while Buffer fill 0% I (22710) vs1053: Wait while Buffer fill 0% I (22760) vs1053: Wait while Buffer fill 0% I (22810) vs1053: Wait while Buffer fill 0% I (22860) vs1053: Wait while Buffer fill 0% I (22910) vs1053: Wait while Buffer fill 0% I (22960) vs1053: Wait while Buffer fill 0% I (23010) vs1053: Wait while Buffer fill 0% I (23060) vs1053: Wait while Buffer fill 0% I (23110) vs1053: Wait while Buffer fill 0% I (23160) vs1053: Wait while Buffer fill 1% I (23210) vs1053: Wait while Buffer fill 1% I (23260) vs1053: Wait while Buffer fill 1% I (23310) vs1053: Wait while Buffer fill 1% I (23360) vs1053: Wait while Buffer fill 1% I (23410) vs1053: Wait while Buffer fill 1% I (23460) vs1053: Wait while Buffer fill 1% I (23510) vs1053: Wait while Buffer fill 1% I (23560) vs1053: Wait while Buffer fill 2% I (23610) vs1053: Wait while Buffer fill 2% I (23660) vs1053: Wait while Buffer fill 2% I (23710) vs1053: Wait while Buffer fill 2% I (23760) vs1053: Wait while Buffer fill 2% I (23810) vs1053: Wait while Buffer fill 2% I (23860) vs1053: Wait while Buffer fill 2% I (23910) vs1053: Wait while Buffer fill 2% I (23960) vs1053: Wait while Buffer fill 2% I (24010) vs1053: Wait while Buffer fill 2% I (24060) vs1053: Wait while Buffer fill 2% I (24110) vs1053: Wait while Buffer fill 2% I (24160) vs1053: Wait while Buffer fill 3% I (24210) vs1053: Wait while Buffer fill 3% I (24260) vs1053: Wait while Buffer fill 3% I (24310) vs1053: Wait while Buffer fill 3% I (24360) vs1053: Wait while Buffer fill 3% I (24410) vs1053: Wait while Buffer fill 3% I (24460) vs1053: Wait while Buffer fill 3% I (24510) vs1053: Wait while Buffer fill 3% I (24560) vs1053: Wait while Buffer fill 3% I (24610) vs1053: Wait while Buffer fill 4% I (24660) vs1053: Wait while Buffer fill 4% I (24710) vs1053: Wait while Buffer fill 4% I (24760) vs1053: Wait while Buffer fill 4% I (24810) vs1053: Wait while Buffer fill 4% I (24860) vs1053: Wait while Buffer fill 4% I (24910) vs1053: Wait while Buffer fill 4% I (24960) vs1053: Wait while Buffer fill 4% I (25010) vs1053: Wait while Buffer fill 5% I (25080) vs1053: Wait while Buffer fill 4% I (25130) vs1053: Wait while Buffer fill 4% I (25180) vs1053: Wait while Buffer fill 5% I (25310) vs1053: Wait while Buffer fill 4% I (25360) vs1053: Wait while Buffer fill 4% I (25410) vs1053: Wait while Buffer fill 5% I (25540) vs1053: Wait while Buffer fill 4% I (25590) vs1053: Wait while Buffer fill 4% I (25640) vs1053: Wait while Buffer fill 4% I (25690) vs1053: Wait while Buffer fill 4% I (25740) vs1053: Wait while Buffer fill 4% I (25790) vs1053: Wait while Buffer fill 5% I (25950) vs1053: Wait while Buffer fill 4% I (26000) vs1053: Wait while Buffer fill 5% I (39430) audio_player: Buffer fill 9%, 102867 // 1048576 bytes I (60290) audio_player: Buffer fill 9%, 102738 // 1048576 bytes I (81100) audio_player: Buffer fill 9%, 104253 // 1048576 bytes I (102370) audio_player: Buffer fill 9%, 98733 // 1048576 bytes I (123200) audio_player: Buffer fill 9%, 98588 // 1048576 bytes I (143450) audio_player: Buffer fill 10%, 106303 // 1048576 bytes I (164350) audio_player: Buffer fill 10%, 106158 // 1048576 bytes I (185420) audio_player: Buffer fill 9%, 102941 // 1048576 bytes

my log right now

ChristopheBaeyens commented 3 years ago

Ok, in that case I will close the case this evening.

Thx.

By the way do you know why A0 should be grounded?

Van: Alex Pilnikov notifications@github.com Verzonden: vrijdag 11 december 2020 9:57 Aan: karawin/Ka-Radio Ka-Radio@noreply.github.com CC: ChristopheBaeyens christophe.baeyens@telenet.be; Author author@noreply.github.com Onderwerp: Re: [karawin/Ka-Radio] Unable to see the SSID network (#89)

i use esp32, but i have some problem even with 4mb ext ram

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/karawin/Ka-Radio/issues/89#issuecomment-743064381 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ASB3FCXZCF4GY7RMTQNV6ZTSUHNGPANCNFSM4UTSG3ZA . https://github.com/notifications/beacon/ASB3FCSSETOWQLOHWF36OFDSUHNGPA5CNFSM4UTSG3ZKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOFRFEGPI.gif

ChristopheBaeyens commented 3 years ago

Ok I will also check the log, I did not do that.

Can I use the Arduino ide monitor for this?

Van: Alex Pilnikov notifications@github.com Verzonden: vrijdag 11 december 2020 9:58 Aan: karawin/Ka-Radio Ka-Radio@noreply.github.com CC: ChristopheBaeyens christophe.baeyens@telenet.be; Author author@noreply.github.com Onderwerp: Re: [karawin/Ka-Radio] Unable to see the SSID network (#89)

W (18910) webclient: Stream found!!!! Start player

CLI.PLAYING

CLI.META#: Nina - The reason is you

I (22660) vs1053: Wait while Buffer fill 0% I (22710) vs1053: Wait while Buffer fill 0% I (22760) vs1053: Wait while Buffer fill 0% I (22810) vs1053: Wait while Buffer fill 0% I (22860) vs1053: Wait while Buffer fill 0% I (22910) vs1053: Wait while Buffer fill 0% I (22960) vs1053: Wait while Buffer fill 0% I (23010) vs1053: Wait while Buffer fill 0% I (23060) vs1053: Wait while Buffer fill 0% I (23110) vs1053: Wait while Buffer fill 0% I (23160) vs1053: Wait while Buffer fill 1% I (23210) vs1053: Wait while Buffer fill 1% I (23260) vs1053: Wait while Buffer fill 1% I (23310) vs1053: Wait while Buffer fill 1% I (23360) vs1053: Wait while Buffer fill 1% I (23410) vs1053: Wait while Buffer fill 1% I (23460) vs1053: Wait while Buffer fill 1% I (23510) vs1053: Wait while Buffer fill 1% I (23560) vs1053: Wait while Buffer fill 2% I (23610) vs1053: Wait while Buffer fill 2% I (23660) vs1053: Wait while Buffer fill 2% I (23710) vs1053: Wait while Buffer fill 2% I (23760) vs1053: Wait while Buffer fill 2% I (23810) vs1053: Wait while Buffer fill 2% I (23860) vs1053: Wait while Buffer fill 2% I (23910) vs1053: Wait while Buffer fill 2% I (23960) vs1053: Wait while Buffer fill 2% I (24010) vs1053: Wait while Buffer fill 2% I (24060) vs1053: Wait while Buffer fill 2% I (24110) vs1053: Wait while Buffer fill 2% I (24160) vs1053: Wait while Buffer fill 3% I (24210) vs1053: Wait while Buffer fill 3% I (24260) vs1053: Wait while Buffer fill 3% I (24310) vs1053: Wait while Buffer fill 3% I (24360) vs1053: Wait while Buffer fill 3% I (24410) vs1053: Wait while Buffer fill 3% I (24460) vs1053: Wait while Buffer fill 3% I (24510) vs1053: Wait while Buffer fill 3% I (24560) vs1053: Wait while Buffer fill 3% I (24610) vs1053: Wait while Buffer fill 4% I (24660) vs1053: Wait while Buffer fill 4% I (24710) vs1053: Wait while Buffer fill 4% I (24760) vs1053: Wait while Buffer fill 4% I (24810) vs1053: Wait while Buffer fill 4% I (24860) vs1053: Wait while Buffer fill 4% I (24910) vs1053: Wait while Buffer fill 4% I (24960) vs1053: Wait while Buffer fill 4% I (25010) vs1053: Wait while Buffer fill 5% I (25080) vs1053: Wait while Buffer fill 4% I (25130) vs1053: Wait while Buffer fill 4% I (25180) vs1053: Wait while Buffer fill 5% I (25310) vs1053: Wait while Buffer fill 4% I (25360) vs1053: Wait while Buffer fill 4% I (25410) vs1053: Wait while Buffer fill 5% I (25540) vs1053: Wait while Buffer fill 4% I (25590) vs1053: Wait while Buffer fill 4% I (25640) vs1053: Wait while Buffer fill 4% I (25690) vs1053: Wait while Buffer fill 4% I (25740) vs1053: Wait while Buffer fill 4% I (25790) vs1053: Wait while Buffer fill 5% I (25950) vs1053: Wait while Buffer fill 4% I (26000) vs1053: Wait while Buffer fill 5% I (39430) audio_player: Buffer fill 9%, 102867 // 1048576 bytes I (60290) audio_player: Buffer fill 9%, 102738 // 1048576 bytes I (81100) audio_player: Buffer fill 9%, 104253 // 1048576 bytes I (102370) audio_player: Buffer fill 9%, 98733 // 1048576 bytes I (123200) audio_player: Buffer fill 9%, 98588 // 1048576 bytes I (143450) audio_player: Buffer fill 10%, 106303 // 1048576 bytes I (164350) audio_player: Buffer fill 10%, 106158 // 1048576 bytes I (185420) audio_player: Buffer fill 9%, 102941 // 1048576 bytes

my log right now

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/karawin/Ka-Radio/issues/89#issuecomment-743064995 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ASB3FCX2NUAAZDSI3AWDGELSUHNK7ANCNFSM4UTSG3ZA . https://github.com/notifications/beacon/ASB3FCR3SHUBW5644VLYBS3SUHNK7A5CNFSM4UTSG3ZKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOFRFELIY.gif

pilnikov commented 3 years ago

to avoid interference that can be recognized by the esp as pressing the buttons of an analog keyboard

pilnikov commented 3 years ago

Can I use the Arduino ide monitor for this? Yes of course

ChristopheBaeyens commented 3 years ago

thx

Van: Alex Pilnikov notifications@github.com Verzonden: vrijdag 11 december 2020 10:02 Aan: karawin/Ka-Radio Ka-Radio@noreply.github.com CC: ChristopheBaeyens christophe.baeyens@telenet.be; Author author@noreply.github.com Onderwerp: Re: [karawin/Ka-Radio] Unable to see the SSID network (#89)

to avoid interference that can be recognized by the esp as pressing the buttons of an analog keyboard

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/karawin/Ka-Radio/issues/89#issuecomment-743066782 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ASB3FCR6T4DAA4YS7TRLAZ3SUHNZPANCNFSM4UTSG3ZA . https://github.com/notifications/beacon/ASB3FCUUYZI4CY6SF5E32BDSUHNZPA5CNFSM4UTSG3ZKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOFRFEZHQ.gif

ChristopheBaeyens commented 3 years ago

OK, something I will do this evening then, thx again 😊

Van: Alex Pilnikov notifications@github.com Verzonden: vrijdag 11 december 2020 10:03 Aan: karawin/Ka-Radio Ka-Radio@noreply.github.com CC: ChristopheBaeyens christophe.baeyens@telenet.be; Author author@noreply.github.com Onderwerp: Re: [karawin/Ka-Radio] Unable to see the SSID network (#89)

Can I use the Arduino ide monitor for this? Yes of course

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/karawin/Ka-Radio/issues/89#issuecomment-743067316 , or unsubscribe https://github.com/notifications/unsubscribe-auth/ASB3FCWXGCTDOWN5LQSXNJLSUHN5PANCNFSM4UTSG3ZA . https://github.com/notifications/beacon/ASB3FCWQ5LK5A2JBUJ6IYETSUHN5PA5CNFSM4UTSG3ZKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOFRFE5NA.gif

ChristopheBaeyens commented 3 years ago

For the moment I will wait until I have decided to go for another board or extra ram.