I connected the free contacts of the wrover module to the volume and station switch, as well as to the start / stop buttons. I corrected the csv file for my configuration, the volume buttons and start / stop work well, but the station switching buttons simply duplicate the volume buttons. Holding the C button has no effect. Then I checked the work with the encoders - the same effect. Finally, I connect the IR receiver and configured the button codes for my remote, and ... the volume works, the other buttons do not affect anything, although their codes are displayed confidently and stably in the terminal. Through the web interface everything works fine. Firmware v2.3 R0
I connected the free contacts of the wrover module to the volume and station switch, as well as to the start / stop buttons. I corrected the csv file for my configuration, the volume buttons and start / stop work well, but the station switching buttons simply duplicate the volume buttons. Holding the C button has no effect. Then I checked the work with the encoders - the same effect. Finally, I connect the IR receiver and configured the button codes for my remote, and ... the volume works, the other buttons do not affect anything, although their codes are displayed confidently and stably in the terminal. Through the web interface everything works fine. Firmware v2.3 R0