Analysis not working. Just keeps spinning...

[gubuntu]

From @saravanaganesh18 on March 14, 2018 13:54

Update (latest):

Coordinates were edited manually to proper lat - long. But still, analysis part it not working. It keeps on spinning.

Most probably, this must be the issue reported here - https://github.com/kartoza/geosafe/issues/175. How to fix this ?

---

Previous Question

1) I've uploaded a raster layer (Earthquake: Hazard) in Kartoza server and in our server respectively.

2) In Kartoza server, no issues with the analysis.

3) But in our server, the analysis process just keeps running (just spinning). First i thought this might be the issue raised here https://github.com/kartoza/geosafe/issues/175

4) But then, i noticed a strange issue. In Kartoza Server, Both the hazard layer and exposure layer were in the correct geographical location. But in our server, the raster layer (Earthquake: Hazard) was shifted

5) I checked the extent & metadata details. This is the screenshot of the raster in Kartoza server

6) And, this is the screenshot of the raster in our server. One could notice, the location is correct in the map_preview window. But, the coordinates were swapped in Metadata Detail's column

Path to the raster in our server: http://159.65.248.35/layers/geonode:padang_eq_2009_wgs84

Path to the raster in Kartoza's server: http://geonode.kartoza.com/layers/geonode:padang_eq_2009_wgs84

Any advise or guidance would be greatly appreciated. Thanks

Copied from original issue: kartoza/docker-geosafe#115

[gubuntu]

From @lucernae on March 26, 2018 22:40

@saravanaganesh18 After I inspect it closely, this is probably because of the bug in the image you are currently using. So, I'm trying to fix a stable build. However to investigate further edge cases. Can you confirm that the only analysis here is the one that you are trying to run?:

http://159.65.248.35/geosafe/analysis/

[gubuntu]

From @saravanaganesh18 on March 27, 2018 13:22

@lucernae I've added two other layers (MMI and Buildings). But still the issue persists.

Also, metadata - i am still manually editing the tags

[gubuntu]

@saravanaganesh18 we are doing further work on GeoNode now as part of a WB contract and we hope to have a clear naming convention and versioning procedure established presently.

[gubuntu]

From @saravanaganesh18 on May 8, 2018 5:32

@gubuntu Thanks for the update. In case, if anyone want to check the issue, this is the new address: http://104.131.165.7/geosafe/analysis/create

More than a month, i am stuck at this point (analysis). Is it a version issue ?. I couldn't update celery, etc.. to latest version.

[gubuntu]

@saravanaganesh18 please could you provide updated feedback on this after doing an upgrade with our latest work.

cc @lucernae

[saravanaganesh18]

@gubuntu Thanks for the update mate. For the last five months still can't pass through this phase. Didn't check the analysis page for the last one month. Will check the upgrade and let you know ASAP.

Geonode version (which i've deployed) - is still 2.7. Will it create any issues ?

[gubuntu]

if you follow our Rancher deployment you'll get our fork of GeoNode 2.8

[saravanaganesh18]

@gubuntu Hi, I've tried and it's even worse than previous version. Can't even able to see the uploaded layers. I've already raised this issue and it's been resolved. But it's happening again. I've tried the steps mentioned in this thread. Same result

https://github.com/kartoza/geosafe/issues/283

On a side note, I am desperately trying to sort this out for my PhD completion. Since i couldn't resolve this - my PhD completion is getting delayed for months. So if you could help me in sorting this out that will be immensely helpful.

[lucernae]

Did you install it via rancher? Can you point out where you install it? @saravanaganesh18

[saravanaganesh18]

Yes. It has been installed via rancher.

This is the url of running site - http://104.131.165.7

[gubuntu]

@saravanaganesh18 you definitely need the latest version (comes with with Geonode 2.8 and InaSAFE 4.4). @lucernae can advise on the best way to install / upgrade