search

kasteleman / com.innr

Innr Zigbee driver for Homey
2 stars 10 forks source link

Innr does not pair with homey #19

Open mamboritesh opened 5 years ago

mamboritesh commented 5 years ago

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

kasteleman commented 5 years ago

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA, or mute the thread https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA .

mamboritesh commented 5 years ago

I added:

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author author@noreply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA, or mute the thread https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA.

kasteleman commented 5 years ago

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA , or mute the thread < https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848>, or mute the thread< https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558, or mute the thread https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA .

mamboritesh commented 5 years ago

Ok, I will try that. Hopefully it works! I will let you know. Thank you

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author author@noreply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA , or mute the thread < https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848>, or mute the thread< https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558, or mute the thread https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA.

mamboritesh commented 5 years ago

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author author@noreply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA , or mute the thread < https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848>, or mute the thread< https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558, or mute the thread https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA.

kasteleman commented 5 years ago

Yes indeed, this could cause errors because other devices may use the strip as router to connect indirect with Homey and therefore could also become unreachable! So never cut power of a powered Zigbee device if you don’t explicit need to!

Regards,

Martin

Op do 10 okt. 2019 om 10:22 schreef mamboritesh notifications@github.com

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh <notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848 , or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558 , or mute the thread < https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166>, or mute the thread< https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBY2S7MMEFDTZ72D4TQN3Q4JA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEA3LVIY#issuecomment-540457635, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKFGO36QYYOGOBPG6H3QN3Q4JANCNFSM4I6XPUAA .

mamboritesh commented 3 years ago

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh mambo_ritesh@hotmail.com Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr reply@reply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author author@noreply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA , or mute the thread < https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848>, or mute the thread< https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558, or mute the thread https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA.

kasteleman commented 3 years ago

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh notifications@github.com

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh mambo_ritesh@hotmail.com Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr reply@reply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh <notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848 , or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558 , or mute the thread < https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166>, or mute the thread< https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA .

mamboritesh commented 3 years ago

Het vreemde is dat ik enige tijd geleden 1 van de 3 178t lampen had toegevoegd (destijds nog in V4), deed het prima. Ik probeerde nu om de overige 2 toe te voegen (V5), maar kreeg dus de foutmelding. Vervolgens heb ik de ene die al was toegevoegd verwijderd om te testen wat er zou gebeuren. Maar nu krijg ik ook bij die een foutmelding.

Ik heb zojuist gedaan wat je suggereerde: 1 vd drie lampen is wel toegevoegd als generiek zigbee apparaat. Het probleem lijkt dan toch aan de app te liggen?

Van: kasteleman notifications@github.com Verzonden: maandag 22 februari 2021 09:01 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author author@noreply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh notifications@github.com

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh mambo_ritesh@hotmail.com Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr reply@reply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh <notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848 , or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558 , or mute the thread < https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166>, or mute the thread< https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA.

kasteleman commented 3 years ago

Kan je even de info van de generiek toegevoegde lamp doorgeven?

Op ma 22 feb. 2021 om 11:08 schreef mamboritesh notifications@github.com

Het vreemde is dat ik enige tijd geleden 1 van de 3 178t lampen had toegevoegd (destijds nog in V4), deed het prima. Ik probeerde nu om de overige 2 toe te voegen (V5), maar kreeg dus de foutmelding. Vervolgens heb ik de ene die al was toegevoegd verwijderd om te testen wat er zou gebeuren. Maar nu krijg ik ook bij die een foutmelding.

Ik heb zojuist gedaan wat je suggereerde: 1 vd drie lampen is wel toegevoegd als generiek zigbee apparaat. Het probleem lijkt dan toch aan de app te liggen?

Van: kasteleman notifications@github.com Verzonden: maandag 22 februari 2021 09:01 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh notifications@github.com

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh mambo_ritesh@hotmail.com Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr reply@reply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh <notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh < notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166 , or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-783257188, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKAQMINKHHAA5VGFFTTTAIUI5ANCNFSM4I6XPUAA .

mamboritesh commented 3 years ago

Hierbij screenshot uit de app:

[cid:3d211d68-c797-4255-ae35-2531b5fa48b3]

Van: kasteleman notifications@github.com Verzonden: maandag 22 februari 2021 12:55 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author author@noreply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Kan je even de info van de generiek toegevoegde lamp doorgeven?

Op ma 22 feb. 2021 om 11:08 schreef mamboritesh notifications@github.com

Het vreemde is dat ik enige tijd geleden 1 van de 3 178t lampen had toegevoegd (destijds nog in V4), deed het prima. Ik probeerde nu om de overige 2 toe te voegen (V5), maar kreeg dus de foutmelding. Vervolgens heb ik de ene die al was toegevoegd verwijderd om te testen wat er zou gebeuren. Maar nu krijg ik ook bij die een foutmelding.

Ik heb zojuist gedaan wat je suggereerde: 1 vd drie lampen is wel toegevoegd als generiek zigbee apparaat. Het probleem lijkt dan toch aan de app te liggen?

Van: kasteleman notifications@github.com Verzonden: maandag 22 februari 2021 09:01 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh notifications@github.com

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh mambo_ritesh@hotmail.com Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr reply@reply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh <notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh < notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166 , or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-783257188, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKAQMINKHHAA5VGFFTTTAIUI5ANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19#issuecomment-783321679, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANNW546E35TYIGWRRY4H3PTTAJA2RANCNFSM4I6XPUAA.

mamboritesh commented 3 years ago

en de gegevens uit homey developer:

Property Value ID c1b584c3-e8cb-4e18-be74-aa5d2101b6e8 Class socket Driver homey:manager:vdevice — zigbeebasic Ready Yes Available Yes Warning No Custom icon No

Data Key Value token "930368a2-a269-48ad-99cf-08740bd81493"

Settings Key Value zb_product_id "RB 178 T" zb_manufacturer_name "innr" energy_alwayson false energy_value_off null energy_value_on null

Capabilities Capability Type Value Edit value Last Updated onoff boolean false 3 days ago dim number 0.29 0,29 6 days ago

Van: Ritesh Manbodh mambo_ritesh@hotmail.com Verzonden: zaterdag 27 februari 2021 08:39 Aan: kasteleman/com.innr reply@reply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Hierbij screenshot uit de app:

[cid:3d211d68-c797-4255-ae35-2531b5fa48b3]

Van: kasteleman notifications@github.com Verzonden: maandag 22 februari 2021 12:55 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author author@noreply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Kan je even de info van de generiek toegevoegde lamp doorgeven?

Op ma 22 feb. 2021 om 11:08 schreef mamboritesh notifications@github.com

Het vreemde is dat ik enige tijd geleden 1 van de 3 178t lampen had toegevoegd (destijds nog in V4), deed het prima. Ik probeerde nu om de overige 2 toe te voegen (V5), maar kreeg dus de foutmelding. Vervolgens heb ik de ene die al was toegevoegd verwijderd om te testen wat er zou gebeuren. Maar nu krijg ik ook bij die een foutmelding.

Ik heb zojuist gedaan wat je suggereerde: 1 vd drie lampen is wel toegevoegd als generiek zigbee apparaat. Het probleem lijkt dan toch aan de app te liggen?

Van: kasteleman notifications@github.com Verzonden: maandag 22 februari 2021 09:01 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh notifications@github.com

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh mambo_ritesh@hotmail.com Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr reply@reply.github.com Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh <notifications@github.com

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman notifications@github.com Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr com.innr@noreply.github.com CC: mamboritesh mambo_ritesh@hotmail.com; Author < author@noreply.github.com> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh < notifications@github.com

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166 , or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-783257188, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKAQMINKHHAA5VGFFTTTAIUI5ANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19#issuecomment-783321679, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANNW546E35TYIGWRRY4H3PTTAJA2RANCNFSM4I6XPUAA.

mamboritesh commented 3 years ago

Hallo,

Ik heb al mijn innr apparaten verwijderd en de innr app opnieuw geinstalleerd. Homey en innr zijn bijgewerkt naar de laatste versies.

Het toevoegen van de rgbw ledstrip ging eenvoudig. Het toevoegen van de gu10 tunable spots (rs 128 t) lukt telkens niet, homey geeft aan: onbekende fout.

Voorheen bij versie 4 van Homey heb ik alles kunnen toevoegen.

Ik heb in totaal 21 rs 128 t spots, die ik nu niet kan bedienen. Ik hoop daarom dat u raad weet

Van: Ritesh Manbodh @.> Verzonden: dinsdag 2 maart 2021 13:14 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

en de gegevens uit homey developer:

Property Value ID c1b584c3-e8cb-4e18-be74-aa5d2101b6e8 Class socket Driver homey:manager:vdevice — zigbeebasic Ready Yes Available Yes Warning No Custom icon No

Data Key Value token "930368a2-a269-48ad-99cf-08740bd81493"

Settings Key Value zb_product_id "RB 178 T" zb_manufacturer_name "innr" energy_alwayson false energy_value_off null energy_value_on null

Capabilities Capability Type Value Edit value Last Updated onoff boolean false 3 days ago dim number 0.29 0,29 6 days ago

Van: Ritesh Manbodh @.> Verzonden: zaterdag 27 februari 2021 08:39 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Hierbij screenshot uit de app:

[cid:3d211d68-c797-4255-ae35-2531b5fa48b3]

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 12:55 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Kan je even de info van de generiek toegevoegde lamp doorgeven?

Op ma 22 feb. 2021 om 11:08 schreef mamboritesh @.***>

Het vreemde is dat ik enige tijd geleden 1 van de 3 178t lampen had toegevoegd (destijds nog in V4), deed het prima. Ik probeerde nu om de overige 2 toe te voegen (V5), maar kreeg dus de foutmelding. Vervolgens heb ik de ene die al was toegevoegd verwijderd om te testen wat er zou gebeuren. Maar nu krijg ik ook bij die een foutmelding.

Ik heb zojuist gedaan wat je suggereerde: 1 vd drie lampen is wel toegevoegd als generiek zigbee apparaat. Het probleem lijkt dan toch aan de app te liggen?

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 09:01 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh @.***>

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh @.> Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh @.***

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh < @.***

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166 , or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-783257188, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKAQMINKHHAA5VGFFTTTAIUI5ANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19#issuecomment-783321679, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANNW546E35TYIGWRRY4H3PTTAJA2RANCNFSM4I6XPUAA.

kasteleman commented 3 years ago

Hallo

De laatste versie of de laatste testversie?

Indien nog niet geprobeerd, graag de laatste testversie proberen.

Groet,

Martin

Op ma 7 jun. 2021 om 20:47 schreef mamboritesh @.***>

Hallo,

Ik heb al mijn innr apparaten verwijderd en de innr app opnieuw geinstalleerd. Homey en innr zijn bijgewerkt naar de laatste versies.

Het toevoegen van de rgbw ledstrip ging eenvoudig. Het toevoegen van de gu10 tunable spots (rs 128 t) lukt telkens niet, homey geeft aan: onbekende fout.

Voorheen bij versie 4 van Homey heb ik alles kunnen toevoegen.

Ik heb in totaal 21 rs 128 t spots, die ik nu niet kan bedienen. Ik hoop daarom dat u raad weet

Van: Ritesh Manbodh @.> Verzonden: dinsdag 2 maart 2021 13:14 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

en de gegevens uit homey developer:

Property Value ID c1b584c3-e8cb-4e18-be74-aa5d2101b6e8 Class socket Driver homey:manager:vdevice — zigbeebasic Ready Yes Available Yes Warning No Custom icon No

Data Key Value token "930368a2-a269-48ad-99cf-08740bd81493"

Settings Key Value zb_product_id "RB 178 T" zb_manufacturer_name "innr" energy_alwayson false energy_value_off null energy_value_on null

Capabilities Capability Type Value Edit value Last Updated onoff boolean false 3 days ago dim number 0.29 0,29 6 days ago

Van: Ritesh Manbodh @.> Verzonden: zaterdag 27 februari 2021 08:39 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Hierbij screenshot uit de app:

[cid:3d211d68-c797-4255-ae35-2531b5fa48b3]

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 12:55 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Kan je even de info van de generiek toegevoegde lamp doorgeven?

Op ma 22 feb. 2021 om 11:08 schreef mamboritesh @.***>

Het vreemde is dat ik enige tijd geleden 1 van de 3 178t lampen had toegevoegd (destijds nog in V4), deed het prima. Ik probeerde nu om de overige 2 toe te voegen (V5), maar kreeg dus de foutmelding. Vervolgens heb ik de ene die al was toegevoegd verwijderd om te testen wat er zou gebeuren. Maar nu krijg ik ook bij die een foutmelding.

Ik heb zojuist gedaan wat je suggereerde: 1 vd drie lampen is wel toegevoegd als generiek zigbee apparaat. Het probleem lijkt dan toch aan de app te liggen?

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 09:01 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh @.***>

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh @.> Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh @.***

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh < @.***

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730 , or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612 , or unsubscribe<

https://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/kasteleman/com.innr/issues/19#issuecomment-783257188 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABNGEKAQMINKHHAA5VGFFTTTAIUI5ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783321679>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ANNW546E35TYIGWRRY4H3PTTAJA2RANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-856175349, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKH7TEPAYU5AL6PLFTDTRUH5NANCNFSM4I6XPUAA .

mamboritesh commented 3 years ago

hoe kom ik aan de testversie van de innr app? Ik kan niets updaten.

Homey draait op 6.1.0 en innr op 2.1.3

Van: kasteleman @.> Verzonden: maandag 7 juni 2021 20:54 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Hallo

De laatste versie of de laatste testversie?

Indien nog niet geprobeerd, graag de laatste testversie proberen.

Groet,

Martin

Op ma 7 jun. 2021 om 20:47 schreef mamboritesh @.***>

Hallo,

Ik heb al mijn innr apparaten verwijderd en de innr app opnieuw geinstalleerd. Homey en innr zijn bijgewerkt naar de laatste versies.

Het toevoegen van de rgbw ledstrip ging eenvoudig. Het toevoegen van de gu10 tunable spots (rs 128 t) lukt telkens niet, homey geeft aan: onbekende fout.

Voorheen bij versie 4 van Homey heb ik alles kunnen toevoegen.

Ik heb in totaal 21 rs 128 t spots, die ik nu niet kan bedienen. Ik hoop daarom dat u raad weet

Van: Ritesh Manbodh @.> Verzonden: dinsdag 2 maart 2021 13:14 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

en de gegevens uit homey developer:

Property Value ID c1b584c3-e8cb-4e18-be74-aa5d2101b6e8 Class socket Driver homey:manager:vdevice — zigbeebasic Ready Yes Available Yes Warning No Custom icon No

Data Key Value token "930368a2-a269-48ad-99cf-08740bd81493"

Settings Key Value zb_product_id "RB 178 T" zb_manufacturer_name "innr" energy_alwayson false energy_value_off null energy_value_on null

Capabilities Capability Type Value Edit value Last Updated onoff boolean false 3 days ago dim number 0.29 0,29 6 days ago

Van: Ritesh Manbodh @.> Verzonden: zaterdag 27 februari 2021 08:39 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Hierbij screenshot uit de app:

[cid:3d211d68-c797-4255-ae35-2531b5fa48b3]

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 12:55 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Kan je even de info van de generiek toegevoegde lamp doorgeven?

Op ma 22 feb. 2021 om 11:08 schreef mamboritesh @.***>

Het vreemde is dat ik enige tijd geleden 1 van de 3 178t lampen had toegevoegd (destijds nog in V4), deed het prima. Ik probeerde nu om de overige 2 toe te voegen (V5), maar kreeg dus de foutmelding. Vervolgens heb ik de ene die al was toegevoegd verwijderd om te testen wat er zou gebeuren. Maar nu krijg ik ook bij die een foutmelding.

Ik heb zojuist gedaan wat je suggereerde: 1 vd drie lampen is wel toegevoegd als generiek zigbee apparaat. Het probleem lijkt dan toch aan de app te liggen?

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 09:01 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh @.***>

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh @.> Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh @.***

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh < @.***

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730 , or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612 , or unsubscribe<

https://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/kasteleman/com.innr/issues/19#issuecomment-783257188 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABNGEKAQMINKHHAA5VGFFTTTAIUI5ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783321679>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ANNW546E35TYIGWRRY4H3PTTAJA2RANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-856175349, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKH7TEPAYU5AL6PLFTDTRUH5NANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19#issuecomment-856179469, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANNW54ZYTGEAOV3OZZUWEBDTRUIX3ANCNFSM4I6XPUAA.

mamboritesh commented 3 years ago

ik heb de testversie inmiddels geinstalleerd en ik kan daarmee de rs 128 t spots toevoegen. Dank! Ik heb ook nog ander innr spul (o.a. e27 bulbs) , ik ga daar morgen mee aan de slag. Hopen dat mijn ander innr spul ook opnieuw toegevoegd kan worden.

Van: Ritesh Manbodh @.> Verzonden: maandag 7 juni 2021 23:53 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

hoe kom ik aan de testversie van de innr app? Ik kan niets updaten.

Homey draait op 6.1.0 en innr op 2.1.3

Van: kasteleman @.> Verzonden: maandag 7 juni 2021 20:54 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Hallo

De laatste versie of de laatste testversie?

Indien nog niet geprobeerd, graag de laatste testversie proberen.

Groet,

Martin

Op ma 7 jun. 2021 om 20:47 schreef mamboritesh @.***>

Hallo,

Ik heb al mijn innr apparaten verwijderd en de innr app opnieuw geinstalleerd. Homey en innr zijn bijgewerkt naar de laatste versies.

Het toevoegen van de rgbw ledstrip ging eenvoudig. Het toevoegen van de gu10 tunable spots (rs 128 t) lukt telkens niet, homey geeft aan: onbekende fout.

Voorheen bij versie 4 van Homey heb ik alles kunnen toevoegen.

Ik heb in totaal 21 rs 128 t spots, die ik nu niet kan bedienen. Ik hoop daarom dat u raad weet

Van: Ritesh Manbodh @.> Verzonden: dinsdag 2 maart 2021 13:14 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

en de gegevens uit homey developer:

Property Value ID c1b584c3-e8cb-4e18-be74-aa5d2101b6e8 Class socket Driver homey:manager:vdevice — zigbeebasic Ready Yes Available Yes Warning No Custom icon No

Data Key Value token "930368a2-a269-48ad-99cf-08740bd81493"

Settings Key Value zb_product_id "RB 178 T" zb_manufacturer_name "innr" energy_alwayson false energy_value_off null energy_value_on null

Capabilities Capability Type Value Edit value Last Updated onoff boolean false 3 days ago dim number 0.29 0,29 6 days ago

Van: Ritesh Manbodh @.> Verzonden: zaterdag 27 februari 2021 08:39 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Hierbij screenshot uit de app:

[cid:3d211d68-c797-4255-ae35-2531b5fa48b3]

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 12:55 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Kan je even de info van de generiek toegevoegde lamp doorgeven?

Op ma 22 feb. 2021 om 11:08 schreef mamboritesh @.***>

Het vreemde is dat ik enige tijd geleden 1 van de 3 178t lampen had toegevoegd (destijds nog in V4), deed het prima. Ik probeerde nu om de overige 2 toe te voegen (V5), maar kreeg dus de foutmelding. Vervolgens heb ik de ene die al was toegevoegd verwijderd om te testen wat er zou gebeuren. Maar nu krijg ik ook bij die een foutmelding.

Ik heb zojuist gedaan wat je suggereerde: 1 vd drie lampen is wel toegevoegd als generiek zigbee apparaat. Het probleem lijkt dan toch aan de app te liggen?

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 09:01 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh @.***>

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh @.> Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh @.***

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh < @.***

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730 , or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612 , or unsubscribe<

https://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/kasteleman/com.innr/issues/19#issuecomment-783257188 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABNGEKAQMINKHHAA5VGFFTTTAIUI5ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783321679>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ANNW546E35TYIGWRRY4H3PTTAJA2RANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-856175349, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKH7TEPAYU5AL6PLFTDTRUH5NANCNFSM4I6XPUAA .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/kasteleman/com.innr/issues/19#issuecomment-856179469, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ANNW54ZYTGEAOV3OZZUWEBDTRUIX3ANCNFSM4I6XPUAA.

kasteleman commented 3 years ago

https://homey.app/a/com.innr/test/

On 8 Jun 2021, at 00:24, mamboritesh @.***> wrote:

ik heb de testversie inmiddels geinstalleerd en ik kan daarmee de rs 128 t spots toevoegen. Dank! Ik heb ook nog ander innr spul (o.a. e27 bulbs) , ik ga daar morgen mee aan de slag. Hopen dat mijn ander innr spul ook opnieuw toegevoegd kan worden.

Van: Ritesh Manbodh @.> Verzonden: maandag 7 juni 2021 23:53 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

hoe kom ik aan de testversie van de innr app? Ik kan niets updaten.

Homey draait op 6.1.0 en innr op 2.1.3

Van: kasteleman @.> Verzonden: maandag 7 juni 2021 20:54 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Hallo

De laatste versie of de laatste testversie?

Indien nog niet geprobeerd, graag de laatste testversie proberen.

Groet,

Martin

Op ma 7 jun. 2021 om 20:47 schreef mamboritesh @.***>

Hallo,

Ik heb al mijn innr apparaten verwijderd en de innr app opnieuw geinstalleerd. Homey en innr zijn bijgewerkt naar de laatste versies.

Het toevoegen van de rgbw ledstrip ging eenvoudig. Het toevoegen van de gu10 tunable spots (rs 128 t) lukt telkens niet, homey geeft aan: onbekende fout.

Voorheen bij versie 4 van Homey heb ik alles kunnen toevoegen.

Ik heb in totaal 21 rs 128 t spots, die ik nu niet kan bedienen. Ik hoop daarom dat u raad weet

Van: Ritesh Manbodh @.> Verzonden: dinsdag 2 maart 2021 13:14 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

en de gegevens uit homey developer:

Property Value ID c1b584c3-e8cb-4e18-be74-aa5d2101b6e8 Class socket Driver homey:manager:vdevice — zigbeebasic Ready Yes Available Yes Warning No Custom icon No

Data Key Value token "930368a2-a269-48ad-99cf-08740bd81493"

Settings Key Value zb_product_id "RB 178 T" zb_manufacturer_name "innr" energy_alwayson false energy_value_off null energy_value_on null

Capabilities Capability Type Value Edit value Last Updated onoff boolean false 3 days ago dim number 0.29 0,29 6 days ago

Van: Ritesh Manbodh @.> Verzonden: zaterdag 27 februari 2021 08:39 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Hierbij screenshot uit de app:

[cid:3d211d68-c797-4255-ae35-2531b5fa48b3 ]

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 12:55 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Kan je even de info van de generiek toegevoegde lamp doorgeven?

Op ma 22 feb. 2021 om 11:08 schreef mamboritesh @.***>

Het vreemde is dat ik enige tijd geleden 1 van de 3 178t lampen had toegevoegd (destijds nog in V4), deed het prima. Ik probeerde nu om de overige 2 toe te voegen (V5), maar kreeg dus de foutmelding. Vervolgens heb ik de ene die al was toegevoegd verwijderd om te testen wat er zou gebeuren. Maar nu krijg ik ook bij die een foutmelding.

Ik heb zojuist gedaan wat je suggereerde: 1 vd drie lampen is wel toegevoegd als generiek zigbee apparaat. Het probleem lijkt dan toch aan de app te liggen?

Van: kasteleman @.> Verzonden: maandag 22 februari 2021 09:01 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Wil je eens de innr app uitschakelen en dan de lampen proberen toe te voegen na ze getest te hebben? Worden ze dan wel toegevoegd? Dan weten we nl of het de app is, of iets binnen Homey

Op zo 21 feb. 2021 om 23:32 schreef mamboritesh @.***>

Hoi Kasteleman,

Inmiddels 1,5 jaar verder, maar wellicht kun je mij opnieuw helpen? ik heb nog 3 tunable e27 lampen (178t) die ik wil toevoegen aan Homey, maar ik krijg telkens een foutmelding als ik de lampen toevoeg: "er is iets fout gegaan bij het toevoegen, probeert u het later nog eens".

Ik heb de nieuwste innr app en draai op Homey V5.

Heb je enig idee waarom het toevoegen niet lukt?

Van: Ritesh Manbodh @.> Verzonden: donderdag 10 oktober 2019 10:22 Aan: kasteleman/com.innr @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

It worked. Thank you. Didn't know that Zigbee worked like that. So it is better to add the devices and not remove them from power. For example: led strip will be placed behind a switch to turn it on/off. But when the switch is off, there is no power and the led will not be recognized by Homey. Will that cause problems?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 10:20 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

Ah, that figures! You added the bulbs, but disconnected them from power. Therefore you introduced a max nummer of devices you can add! Nothing to do with the INNR app! Now you have not enough routers and therefore you can not add new devices. That’s how zigbee works and nothing specific for the INNR app nor Homey.

Power up a few bulbs you already added, preferably near Homey. Wait 15 min or so, or reboot Homey and wait 15 min. Then try to add another bulb.

Regards,

Martin

Op wo 9 okt. 2019 om 10:12 schreef mamboritesh @.***

I added:

  • 5 x dimbare lamp E27
  • 2 x tunable amp E27
  • 3 x RGBW lamp E27
  • 5 x RGBW ledstrip
  • 16 x tunable GU10 spot

I added them one by one: after adding the lamp, I removed it from the electricity en added another one. I did this in a continious pace. The reasoning: I am planning to move in my newly build house in november and wanted to add all devices to Homey before I move. So that in the new house I just have to put the lights in the sockets and they will work.

Suddenly Homey did not recognise a new INNR rgbw strip/gu10 spot anymore. I deinstalled the innr app (but then all devices were removed). So I started to add the devices again in the same way (one by one). The ones that weren't recognized the first time were perfectly added the second time. But then, also after a while Homey did not recognize a new lamp just like the first time. I removed Homey from electricity the whole night and put it back on this morning. After 15 min I tried to add again, but Homey still didn't recognise...

It looks like there is a maximum of lamps the INNR app can add?

Van: kasteleman @.> Verzonden: woensdag 9 oktober 2019 07:31 Aan: kasteleman/com.innr @.> CC: mamboritesh @.>; Author < @.> Onderwerp: Re: [kasteleman/com.innr] Innr does not pair with homey (#19)

So al the items you added are bulbs, no other sensors? Hoe long did you wait after a reboot of Homey before adding the last device? How many did you add already? After reboot of Homey, wait 15 -20 min before adding a device. Zigbee needs a little time to settle, routed need to rebuild etc.

Regards,

Martin

Op di 8 okt. 2019 om 23:44 schreef mamboritesh < @.***

I have just bought homey and bought around 16 RGBW led strips and 16 tunabe gu10 spots and some e27 smart bulbs.

I am adding them one by one and it works fine untill some point. Now homey doesn't add any device. I deleted one device, did a reset and wanted to add it again, but that also didn't work. Also restarted the innr app, restarted homey completely and restarted my mobile phone. Nothing worked.

Does anyone know what the problem could be?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKBBALFKSZKP2SQ2CRDQNT5NHA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HQO6HZA

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ABNGEKFMQYFAIIIQXRLYYHDQNT5NHANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848 https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542YPNPGT3B4IFANZQLQNVUCPA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAWUTAA#issuecomment-539838848

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ANNW5423LKIPZQWN4W4IZX3QNVUCPANCNFSM4I6XPUAA

.

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub <

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558 https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ABNGEKCLXRR2BQLC5DUMF3LQNWG75A5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXBG7Q#issuecomment-539890558

, or mute the thread <

https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ABNGEKH67CKCLER67WKR44DQNWG75ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166 https://github.com/kasteleman/com.innr/issues/19?email_source=notifications&email_token=ANNW542SDRB7XAHSEEHPH4DQNWH3PA5CNFSM4I6XPUAKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXB3LQ#issuecomment-539893166

, or mute the thread<

https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ANNW545LHTXDML45KBNOJ4TQNWH3PANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730 https://github.com/kasteleman/com.innr/issues/19#issuecomment-782939730 , or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ABNGEKASXXTKXV74PZTU563TAGCW7ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612 https://github.com/kasteleman/com.innr/issues/19#issuecomment-783173612 , or unsubscribe<

https://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ANNW543ISUCTW7PSFNCXFY3TAIFMRANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/kasteleman/com.innr/issues/19#issuecomment-783257188 https://github.com/kasteleman/com.innr/issues/19#issuecomment-783257188 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABNGEKAQMINKHHAA5VGFFTTTAIUI5ANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ABNGEKAQMINKHHAA5VGFFTTTAIUI5ANCNFSM4I6XPUAA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/kasteleman/com.innr/issues/19#issuecomment-783321679 https://github.com/kasteleman/com.innr/issues/19#issuecomment-783321679>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ANNW546E35TYIGWRRY4H3PTTAJA2RANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ANNW546E35TYIGWRRY4H3PTTAJA2RANCNFSM4I6XPUAA

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <https://github.com/kasteleman/com.innr/issues/19#issuecomment-856175349 https://github.com/kasteleman/com.innr/issues/19#issuecomment-856175349>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABNGEKH7TEPAYU5AL6PLFTDTRUH5NANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ABNGEKH7TEPAYU5AL6PLFTDTRUH5NANCNFSM4I6XPUAA> .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<https://github.com/kasteleman/com.innr/issues/19#issuecomment-856179469 https://github.com/kasteleman/com.innr/issues/19#issuecomment-856179469>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ANNW54ZYTGEAOV3OZZUWEBDTRUIX3ANCNFSM4I6XPUAA https://github.com/notifications/unsubscribe-auth/ANNW54ZYTGEAOV3OZZUWEBDTRUIX3ANCNFSM4I6XPUAA>. — You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/kasteleman/com.innr/issues/19#issuecomment-856302641, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABNGEKH7QISQZ4NOUMXPKH3TRVBLTANCNFSM4I6XPUAA.