Devicemapper device leak with container restart of a crashed pod

Show kata-collect-data.sh details

# Meta details Running `kata-collect-data.sh` version `1.7.4 (commit 984f7bbaa7a26ebcec29ef9911a63aaef601c62d)` at `2019-09-05.11:09:23.866573913+0000`. --- Runtime is `/usr/bin/kata-runtime`. # `kata-env` Output of "`/usr/bin/kata-runtime kata-env`": ```toml [Meta] Version = "1.0.23" [Runtime] Debug = false Trace = false DisableGuestSeccomp = true DisableNewNetNs = false Path = "/usr/bin/kata-runtime" [Runtime.Version] Semver = "1.7.4" Commit = "984f7bbaa7a26ebcec29ef9911a63aaef601c62d" OCI = "1.0.1-dev" [Runtime.Config] Path = "/opt/kata/share/defaults/kata-containers/configuration-qemu.toml" [Hypervisor] MachineType = "pc" Version = "QEMU xx" Path = "/usr/libexec/qemu-kvm" BlockDeviceDriver = "virtio-scsi" EntropySource = "/dev/urandom" Msize9p = 8192 MemorySlots = 10 Debug = false UseVSock = false SharedFS = "virtio-9p" [Image] Path = "/opt/kata/share/kata-containers/kata-containers-image_clearlinux_1.7.4_agent_6a96cd0906.img" [Kernel] Path = "/opt/kata/share/kata-containers/vmlinux-4.19.52-45" Parameters = "init=/usr/lib/systemd/systemd systemd.unit=kata-containers.target systemd.mask=systemd-networkd.service systemd.mask=systemd-networkd.socket systemd.mask=systemd-journald.service systemd.mask=systemd-journald.socket systemd.mask=systemd-journal-flush.service systemd.mask=systemd-journald-dev-log.socket systemd.mask=systemd-udevd.service systemd.mask=systemd-udevd.socket systemd.mask=systemd-udev-trigger.service systemd.mask=systemd-udevd-kernel.socket systemd.mask=systemd-udevd-control.socket systemd.mask=systemd-timesyncd.service systemd.mask=systemd-update-utmp.service systemd.mask=systemd-tmpfiles-setup.service systemd.mask=systemd-tmpfiles-cleanup.service systemd.mask=systemd-tmpfiles-cleanup.timer systemd.mask=tmp.mount systemd.mask=systemd-random-seed.service systemd.mask=systemd-coredump@.service init=/usr/bin/kata-agent" [Initrd] Path = "" [Proxy] Type = "kataProxy" Version = "kata-proxy version 1.7.4-494d9a35e330b002de547a5473c167a3482eb1ca" Path = "/opt/kata/libexec/kata-containers/kata-proxy" Debug = false [Shim] Type = "kataShim" Version = "kata-shim version 1.7.4-238a235f13436282bdb198d4e3ae6ea60202e3d3" Path = "/opt/kata/libexec/kata-containers/kata-shim" Debug = false [Agent] Type = "kata" Debug = false Trace = false TraceMode = "" TraceType = "" [Host] Kernel = "4.19.12-1.el7.elrepo.x86_64" Architecture = "amd64" VMContainerCapable = true SupportVSocks = true [Host.Distro] Name = "CentOS Linux" Version = "7" [Host.CPU] Vendor = "GenuineIntel" Model = "Intel(R) Xeon(R) Gold 5118 CPU @ 2.30GHz" [Netmon] Version = "kata-netmon version 1.7.4" Path = "/opt/kata/libexec/kata-containers/kata-netmon" Debug = false Enable = false ``` --- # Runtime config files ## Runtime default config files ``` /etc/kata-containers/configuration.toml /opt/kata/share/defaults/kata-containers/configuration.toml ``` ## Runtime config file contents Output of "`cat "/etc/kata-containers/configuration.toml"`": ```toml [hypervisor.qemu] path = "/usr/libexec/qemu-kvm" kernel = "/opt/kata/share/kata-containers/vmlinux.container" image = "/opt/kata/share/kata-containers/kata-containers.img" machine_type = "pc" # Optional space-separated list of options to pass to the guest kernel. # For example, use `kernel_params = "vsyscall=emulate"` if you are having # trouble running pre-2.15 glibc. # # WARNING: - any parameter specified here will take priority over the default # parameter value of the same name used to start the virtual machine. # Do not set values here unless you understand the impact of doing so as you # may stop the virtual machine from booting. # To see the list of default parameters, enable hypervisor debug, create a # container and look for 'default-kernel-parameters' log entries. kernel_params = "init=/usr/bin/kata-agent" # Path to the firmware. # If you want that qemu uses the default firmware leave this option empty firmware = "" # Machine accelerators # comma-separated list of machine accelerators to pass to the hypervisor. # For example, `machine_accelerators = "nosmm,nosmbus,nosata,nopit,static-prt,nofw"` machine_accelerators="nofw" # Default number of vCPUs per SB/VM: # unspecified or 0 --> will be set to 1 # < 0 --> will be set to the actual number of physical cores # > 0 <= number of physical cores --> will be set to the specified number # > number of physical cores --> will be set to the actual number of physical cores default_vcpus = 1 # Default maximum number of vCPUs per SB/VM: # unspecified or == 0 --> will be set to the actual number of physical cores or to the maximum number # of vCPUs supported by KVM if that number is exceeded # > 0 <= number of physical cores --> will be set to the specified number # > number of physical cores --> will be set to the actual number of physical cores or to the maximum number # of vCPUs supported by KVM if that number is exceeded # WARNING: Depending of the architecture, the maximum number of vCPUs supported by KVM is used when # the actual number of physical cores is greater than it. # WARNING: Be aware that this value impacts the virtual machine's memory footprint and CPU # the hotplug functionality. For example, `default_maxvcpus = 240` specifies that until 240 vCPUs # can be added to a SB/VM, but the memory footprint will be big. Another example, with # `default_maxvcpus = 8` the memory footprint will be small, but 8 will be the maximum number of # vCPUs supported by the SB/VM. In general, we recommend that you do not edit this variable, # unless you know what are you doing. default_maxvcpus = 0 # Bridges can be used to hot plug devices. # Limitations: # * Currently only pci bridges are supported # * Until 30 devices per bridge can be hot plugged. # * Until 5 PCI bridges can be cold plugged per VM. # This limitation could be a bug in qemu or in the kernel # Default number of bridges per SB/VM: # unspecified or 0 --> will be set to 1 # > 1 <= 5 --> will be set to the specified number # > 5 --> will be set to 5 default_bridges = 1 # Default memory size in MiB for SB/VM. # If unspecified then it will be set 2048 MiB. default_memory = 2048 # # Default memory slots per SB/VM. # If unspecified then it will be set 10. # This is will determine the times that memory will be hotadded to sandbox/VM. #memory_slots = 10 # The size in MiB will be plused to max memory of hypervisor. # It is the memory address space for the NVDIMM devie. # If set block storage driver (block_device_driver) to "nvdimm", # should set memory_offset to the size of block device. # Default 0 #memory_offset = 0 # Disable block device from being used for a container's rootfs. # In case of a storage driver like devicemapper where a container's # root file system is backed by a block device, the block device is passed # directly to the hypervisor for performance reasons. # This flag prevents the block device from being passed to the hypervisor, # 9pfs is used instead to pass the rootfs. disable_block_device_use = false # Shared file system type: # - virtio-9p (default) # - virtio-fs shared_fs = "virtio-9p" # Path to vhost-user-fs daemon. virtio_fs_daemon = "/opt/kata/bin/virtiofsd-x86_64" # Default size of DAX cache in MiB virtio_fs_cache_size = 1024 # Cache mode: # # - none # Metadata, data, and pathname lookup are not cached in guest. They are # always fetched from host and any changes are immediately pushed to host. # # - auto # Metadata and pathname lookup cache expires after a configured amount of # time (default is 1 second). Data is cached while the file is open (close # to open consistency). # # - always # Metadata, data, and pathname lookup are cached in guest and never expire. virtio_fs_cache = "always" # Block storage driver to be used for the hypervisor in case the container # rootfs is backed by a block device. This is virtio-scsi, virtio-blk # or nvdimm. block_device_driver = "virtio-scsi" # Specifies cache-related options will be set to block devices or not. # Default false #block_device_cache_set = true # Specifies cache-related options for block devices. # Denotes whether use of O_DIRECT (bypass the host page cache) is enabled. # Default false #block_device_cache_direct = true # Specifies cache-related options for block devices. # Denotes whether flush requests for the device are ignored. # Default false #block_device_cache_noflush = true # Enable iothreads (data-plane) to be used. This causes IO to be # handled in a separate IO thread. This is currently only implemented # for SCSI. # enable_iothreads = false # Enable pre allocation of VM RAM, default false # Enabling this will result in lower container density # as all of the memory will be allocated and locked # This is useful when you want to reserve all the memory # upfront or in the cases where you want memory latencies # to be very predictable # Default false #enable_mem_prealloc = true # Enable huge pages for VM RAM, default false # Enabling this will result in the VM memory # being allocated using huge pages. # This is useful when you want to use vhost-user network # stacks within the container. This will automatically # result in memory pre allocation #enable_hugepages = true # Enable file based guest memory support. The default is an empty string which # will disable this feature. In the case of virtio-fs, this is enabled # automatically and '/dev/shm' is used as the backing folder. # This option will be ignored if VM templating is enabled. #file_mem_backend = "" # Enable swap of vm memory. Default false. # The behaviour is undefined if mem_prealloc is also set to true #enable_swap = true # This option changes the default hypervisor and kernel parameters # to enable debug output where available. This extra output is added # to the proxy logs, but only when proxy debug is also enabled. # # Default false #enable_debug = true # Disable the customizations done in the runtime when it detects # that it is running on top a VMM. This will result in the runtime # behaving as it would when running on bare metal. # #disable_nesting_checks = true # This is the msize used for 9p shares. It is the number of bytes # used for 9p packet payload. #msize_9p = 8192 # If true and vsocks are supported, use vsocks to communicate directly # with the agent and no proxy is started, otherwise use unix # sockets and start a proxy to communicate with the agent. # Default false #use_vsock = true # VFIO devices are hotplugged on a bridge by default. # Enable hotplugging on root bus. This may be required for devices with # a large PCI bar, as this is a current limitation with hotplugging on # a bridge. This value is valid for "pc" machine type. # Default false #hotplug_vfio_on_root_bus = true # If host doesn't support vhost_net, set to true. Thus we won't create vhost fds for nics. # Default false #disable_vhost_net = true # # Default entropy source. # The path to a host source of entropy (including a real hardware RNG) # /dev/urandom and /dev/random are two main options. # Be aware that /dev/random is a blocking source of entropy. If the host # runs out of entropy, the VMs boot time will increase leading to get startup # timeouts. # The source of entropy /dev/urandom is non-blocking and provides a # generally acceptable source of entropy. It should work well for pretty much # all practical purposes. #entropy_source= "/dev/urandom" # Path to OCI hook binaries in the *guest rootfs*. # This does not affect host-side hooks which must instead be added to # the OCI spec passed to the runtime. # # You can create a rootfs with hooks by customizing the osbuilder scripts: # https://github.com/kata-containers/osbuilder # # Hooks must be stored in a subdirectory of guest_hook_path according to their # hook type, i.e. "guest_hook_path/{prestart,postart,poststop}". # The agent will scan these directories for executable files and add them, in # lexicographical order, to the lifecycle of the guest container. # Hooks are executed in the runtime namespace of the guest. See the official documentation: # https://github.com/opencontainers/runtime-spec/blob/v1.0.1/config.md#posix-platform-hooks # Warnings will be logged if any error is encountered will scanning for hooks, # but it will not abort container execution. #guest_hook_path = "/usr/share/oci/hooks" [factory] # VM templating support. Once enabled, new VMs are created from template # using vm cloning. They will share the same initial kernel, initramfs and # agent memory by mapping it readonly. It helps speeding up new container # creation and saves a lot of memory if there are many kata containers running # on the same host. # # When disabled, new VMs are created from scratch. # # Note: Requires "initrd=" to be set ("image=" is not supported). # # Default false #enable_template = true # Specifies the path of template. # # Default "/run/vc/vm/template" #template_path = "/run/vc/vm/template" # The number of caches of VMCache: # unspecified or == 0 --> VMCache is disabled # > 0 --> will be set to the specified number # # VMCache is a function that creates VMs as caches before using it. # It helps speed up new container creation. # The function consists of a server and some clients communicating # through Unix socket. The protocol is gRPC in protocols/cache/cache.proto. # The VMCache server will create some VMs and cache them by factory cache. # It will convert the VM to gRPC format and transport it when gets # requestion from clients. # Factory grpccache is the VMCache client. It will request gRPC format # VM and convert it back to a VM. If VMCache function is enabled, # kata-runtime will request VM from factory grpccache when it creates # a new sandbox. # # Default 0 #vm_cache_number = 0 # Specify the address of the Unix socket that is used by VMCache. # # Default /var/run/kata-containers/cache.sock #vm_cache_endpoint = "/var/run/kata-containers/cache.sock" [proxy.kata] path = "/opt/kata/libexec/kata-containers/kata-proxy" # If enabled, proxy messages will be sent to the system log # (default: disabled) #enable_debug = true [shim.kata] path = "/opt/kata/libexec/kata-containers/kata-shim" # If enabled, shim messages will be sent to the system log # (default: disabled) #enable_debug = true # If enabled, the shim will create opentracing.io traces and spans. # (See https://www.jaegertracing.io/docs/getting-started). # # Note: By default, the shim runs in a separate network namespace. Therefore, # to allow it to send trace details to the Jaeger agent running on the host, # it is necessary to set 'disable_new_netns=true' so that it runs in the host # network namespace. # # (default: disabled) #enable_tracing = true [agent.kata] # If enabled, make the agent display debug-level messages. # (default: disabled) #enable_debug = true # Enable agent tracing. # # If enabled, the default trace mode is "dynamic" and the # default trace type is "isolated". The trace mode and type are set # explicity with the `trace_type=` and `trace_mode=` options. # # Notes: # # - Tracing is ONLY enabled when `enable_tracing` is set: explicitly # setting `trace_mode=` and/or `trace_type=` without setting `enable_tracing` # will NOT activate agent tracing. # # - See https://github.com/kata-containers/agent/blob/master/TRACING.md for # full details. # # (default: disabled) #enable_tracing = true # #trace_mode = "dynamic" #trace_type = "isolated" [netmon] # If enabled, the network monitoring process gets started when the # sandbox is created. This allows for the detection of some additional # network being added to the existing network namespace, after the # sandbox has been created. # (default: disabled) #enable_netmon = true # Specify the path to the netmon binary. path = "/opt/kata/libexec/kata-containers/kata-netmon" # If enabled, netmon messages will be sent to the system log # (default: disabled) #enable_debug = true [runtime] # If enabled, the runtime will log additional debug messages to the # system log # (default: disabled) #enable_debug = true # # Internetworking model # Determines how the VM should be connected to the # the container network interface # Options: # # - bridged # Uses a linux bridge to interconnect the container interface to # the VM. Works for most cases except macvlan and ipvlan. # # - macvtap # Used when the Container network interface can be bridged using # macvtap. # # - none # Used when customize network. Only creates a tap device. No veth pair. # # - tcfilter # Uses tc filter rules to redirect traffic from the network interface # provided by plugin to a tap interface connected to the VM. # internetworking_model="macvtap" # disable guest seccomp # Determines whether container seccomp profiles are passed to the virtual # machine and applied by the kata agent. If set to true, seccomp is not applied # within the guest # (default: true) disable_guest_seccomp=true # If enabled, the runtime will create opentracing.io traces and spans. # (See https://www.jaegertracing.io/docs/getting-started). # (default: disabled) #enable_tracing = true # If enabled, the runtime will not create a network namespace for shim and hypervisor processes. # This option may have some potential impacts to your host. It should only be used when you know what you're doing. # `disable_new_netns` conflicts with `enable_netmon` # `disable_new_netns` conflicts with `internetworking_model=bridged` and `internetworking_model=macvtap`. It works only # with `internetworking_model=none`. The tap device will be in the host network namespace and can connect to a bridge # (like OVS) directly. # If you are using docker, `disable_new_netns` only works with `docker run --net=none` # (default: false) #disable_new_netns = true # Enabled experimental feature list, format: ["a", "b"]. # Experimental features are features not stable enough for production, # They may break compatibility, and are prepared for a big version bump. # Supported experimental features: # 1. "newstore": new persist storage driver which breaks backward compatibility, # expected to move out of experimental in 2.0.0. # (default: []) experimental=[] ``` Output of "`cat "/opt/kata/share/defaults/kata-containers/configuration.toml"`": ```toml [hypervisor.qemu] path = "/usr/libexec/qemu-kvm" kernel = "/opt/kata/share/kata-containers/vmlinux.container" image = "/opt/kata/share/kata-containers/kata-containers.img" machine_type = "pc" # Optional space-separated list of options to pass to the guest kernel. # For example, use `kernel_params = "vsyscall=emulate"` if you are having # trouble running pre-2.15 glibc. # # WARNING: - any parameter specified here will take priority over the default # parameter value of the same name used to start the virtual machine. # Do not set values here unless you understand the impact of doing so as you # may stop the virtual machine from booting. # To see the list of default parameters, enable hypervisor debug, create a # container and look for 'default-kernel-parameters' log entries. kernel_params = "init=/usr/bin/kata-agent" # Path to the firmware. # If you want that qemu uses the default firmware leave this option empty firmware = "" # Machine accelerators # comma-separated list of machine accelerators to pass to the hypervisor. # For example, `machine_accelerators = "nosmm,nosmbus,nosata,nopit,static-prt,nofw"` machine_accelerators="nofw" # Default number of vCPUs per SB/VM: # unspecified or 0 --> will be set to 1 # < 0 --> will be set to the actual number of physical cores # > 0 <= number of physical cores --> will be set to the specified number # > number of physical cores --> will be set to the actual number of physical cores default_vcpus = 1 # Default maximum number of vCPUs per SB/VM: # unspecified or == 0 --> will be set to the actual number of physical cores or to the maximum number # of vCPUs supported by KVM if that number is exceeded # > 0 <= number of physical cores --> will be set to the specified number # > number of physical cores --> will be set to the actual number of physical cores or to the maximum number # of vCPUs supported by KVM if that number is exceeded # WARNING: Depending of the architecture, the maximum number of vCPUs supported by KVM is used when # the actual number of physical cores is greater than it. # WARNING: Be aware that this value impacts the virtual machine's memory footprint and CPU # the hotplug functionality. For example, `default_maxvcpus = 240` specifies that until 240 vCPUs # can be added to a SB/VM, but the memory footprint will be big. Another example, with # `default_maxvcpus = 8` the memory footprint will be small, but 8 will be the maximum number of # vCPUs supported by the SB/VM. In general, we recommend that you do not edit this variable, # unless you know what are you doing. default_maxvcpus = 0 # Bridges can be used to hot plug devices. # Limitations: # * Currently only pci bridges are supported # * Until 30 devices per bridge can be hot plugged. # * Until 5 PCI bridges can be cold plugged per VM. # This limitation could be a bug in qemu or in the kernel # Default number of bridges per SB/VM: # unspecified or 0 --> will be set to 1 # > 1 <= 5 --> will be set to the specified number # > 5 --> will be set to 5 default_bridges = 1 # Default memory size in MiB for SB/VM. # If unspecified then it will be set 2048 MiB. default_memory = 2048 # # Default memory slots per SB/VM. # If unspecified then it will be set 10. # This is will determine the times that memory will be hotadded to sandbox/VM. #memory_slots = 10 # The size in MiB will be plused to max memory of hypervisor. # It is the memory address space for the NVDIMM devie. # If set block storage driver (block_device_driver) to "nvdimm", # should set memory_offset to the size of block device. # Default 0 #memory_offset = 0 # Disable block device from being used for a container's rootfs. # In case of a storage driver like devicemapper where a container's # root file system is backed by a block device, the block device is passed # directly to the hypervisor for performance reasons. # This flag prevents the block device from being passed to the hypervisor, # 9pfs is used instead to pass the rootfs. disable_block_device_use = false # Shared file system type: # - virtio-9p (default) # - virtio-fs shared_fs = "virtio-9p" # Path to vhost-user-fs daemon. virtio_fs_daemon = "/opt/kata/bin/virtiofsd-x86_64" # Default size of DAX cache in MiB virtio_fs_cache_size = 1024 # Cache mode: # # - none # Metadata, data, and pathname lookup are not cached in guest. They are # always fetched from host and any changes are immediately pushed to host. # # - auto # Metadata and pathname lookup cache expires after a configured amount of # time (default is 1 second). Data is cached while the file is open (close # to open consistency). # # - always # Metadata, data, and pathname lookup are cached in guest and never expire. virtio_fs_cache = "always" # Block storage driver to be used for the hypervisor in case the container # rootfs is backed by a block device. This is virtio-scsi, virtio-blk # or nvdimm. block_device_driver = "virtio-scsi" # Specifies cache-related options will be set to block devices or not. # Default false #block_device_cache_set = true # Specifies cache-related options for block devices. # Denotes whether use of O_DIRECT (bypass the host page cache) is enabled. # Default false #block_device_cache_direct = true # Specifies cache-related options for block devices. # Denotes whether flush requests for the device are ignored. # Default false #block_device_cache_noflush = true # Enable iothreads (data-plane) to be used. This causes IO to be # handled in a separate IO thread. This is currently only implemented # for SCSI. # enable_iothreads = false # Enable pre allocation of VM RAM, default false # Enabling this will result in lower container density # as all of the memory will be allocated and locked # This is useful when you want to reserve all the memory # upfront or in the cases where you want memory latencies # to be very predictable # Default false #enable_mem_prealloc = true # Enable huge pages for VM RAM, default false # Enabling this will result in the VM memory # being allocated using huge pages. # This is useful when you want to use vhost-user network # stacks within the container. This will automatically # result in memory pre allocation #enable_hugepages = true # Enable file based guest memory support. The default is an empty string which # will disable this feature. In the case of virtio-fs, this is enabled # automatically and '/dev/shm' is used as the backing folder. # This option will be ignored if VM templating is enabled. #file_mem_backend = "" # Enable swap of vm memory. Default false. # The behaviour is undefined if mem_prealloc is also set to true #enable_swap = true # This option changes the default hypervisor and kernel parameters # to enable debug output where available. This extra output is added # to the proxy logs, but only when proxy debug is also enabled. # # Default false #enable_debug = true # Disable the customizations done in the runtime when it detects # that it is running on top a VMM. This will result in the runtime # behaving as it would when running on bare metal. # #disable_nesting_checks = true # This is the msize used for 9p shares. It is the number of bytes # used for 9p packet payload. #msize_9p = 8192 # If true and vsocks are supported, use vsocks to communicate directly # with the agent and no proxy is started, otherwise use unix # sockets and start a proxy to communicate with the agent. # Default false #use_vsock = true # VFIO devices are hotplugged on a bridge by default. # Enable hotplugging on root bus. This may be required for devices with # a large PCI bar, as this is a current limitation with hotplugging on # a bridge. This value is valid for "pc" machine type. # Default false #hotplug_vfio_on_root_bus = true # If host doesn't support vhost_net, set to true. Thus we won't create vhost fds for nics. # Default false #disable_vhost_net = true # # Default entropy source. # The path to a host source of entropy (including a real hardware RNG) # /dev/urandom and /dev/random are two main options. # Be aware that /dev/random is a blocking source of entropy. If the host # runs out of entropy, the VMs boot time will increase leading to get startup # timeouts. # The source of entropy /dev/urandom is non-blocking and provides a # generally acceptable source of entropy. It should work well for pretty much # all practical purposes. #entropy_source= "/dev/urandom" # Path to OCI hook binaries in the *guest rootfs*. # This does not affect host-side hooks which must instead be added to # the OCI spec passed to the runtime. # # You can create a rootfs with hooks by customizing the osbuilder scripts: # https://github.com/kata-containers/osbuilder # # Hooks must be stored in a subdirectory of guest_hook_path according to their # hook type, i.e. "guest_hook_path/{prestart,postart,poststop}". # The agent will scan these directories for executable files and add them, in # lexicographical order, to the lifecycle of the guest container. # Hooks are executed in the runtime namespace of the guest. See the official documentation: # https://github.com/opencontainers/runtime-spec/blob/v1.0.1/config.md#posix-platform-hooks # Warnings will be logged if any error is encountered will scanning for hooks, # but it will not abort container execution. #guest_hook_path = "/usr/share/oci/hooks" [factory] # VM templating support. Once enabled, new VMs are created from template # using vm cloning. They will share the same initial kernel, initramfs and # agent memory by mapping it readonly. It helps speeding up new container # creation and saves a lot of memory if there are many kata containers running # on the same host. # # When disabled, new VMs are created from scratch. # # Note: Requires "initrd=" to be set ("image=" is not supported). # # Default false #enable_template = true # Specifies the path of template. # # Default "/run/vc/vm/template" #template_path = "/run/vc/vm/template" # The number of caches of VMCache: # unspecified or == 0 --> VMCache is disabled # > 0 --> will be set to the specified number # # VMCache is a function that creates VMs as caches before using it. # It helps speed up new container creation. # The function consists of a server and some clients communicating # through Unix socket. The protocol is gRPC in protocols/cache/cache.proto. # The VMCache server will create some VMs and cache them by factory cache. # It will convert the VM to gRPC format and transport it when gets # requestion from clients. # Factory grpccache is the VMCache client. It will request gRPC format # VM and convert it back to a VM. If VMCache function is enabled, # kata-runtime will request VM from factory grpccache when it creates # a new sandbox. # # Default 0 #vm_cache_number = 0 # Specify the address of the Unix socket that is used by VMCache. # # Default /var/run/kata-containers/cache.sock #vm_cache_endpoint = "/var/run/kata-containers/cache.sock" [proxy.kata] path = "/opt/kata/libexec/kata-containers/kata-proxy" # If enabled, proxy messages will be sent to the system log # (default: disabled) #enable_debug = true [shim.kata] path = "/opt/kata/libexec/kata-containers/kata-shim" # If enabled, shim messages will be sent to the system log # (default: disabled) #enable_debug = true # If enabled, the shim will create opentracing.io traces and spans. # (See https://www.jaegertracing.io/docs/getting-started). # # Note: By default, the shim runs in a separate network namespace. Therefore, # to allow it to send trace details to the Jaeger agent running on the host, # it is necessary to set 'disable_new_netns=true' so that it runs in the host # network namespace. # # (default: disabled) #enable_tracing = true [agent.kata] # If enabled, make the agent display debug-level messages. # (default: disabled) #enable_debug = true # Enable agent tracing. # # If enabled, the default trace mode is "dynamic" and the # default trace type is "isolated". The trace mode and type are set # explicity with the `trace_type=` and `trace_mode=` options. # # Notes: # # - Tracing is ONLY enabled when `enable_tracing` is set: explicitly # setting `trace_mode=` and/or `trace_type=` without setting `enable_tracing` # will NOT activate agent tracing. # # - See https://github.com/kata-containers/agent/blob/master/TRACING.md for # full details. # # (default: disabled) #enable_tracing = true # #trace_mode = "dynamic" #trace_type = "isolated" [netmon] # If enabled, the network monitoring process gets started when the # sandbox is created. This allows for the detection of some additional # network being added to the existing network namespace, after the # sandbox has been created. # (default: disabled) #enable_netmon = true # Specify the path to the netmon binary. path = "/opt/kata/libexec/kata-containers/kata-netmon" # If enabled, netmon messages will be sent to the system log # (default: disabled) #enable_debug = true [runtime] # If enabled, the runtime will log additional debug messages to the # system log # (default: disabled) #enable_debug = true # # Internetworking model # Determines how the VM should be connected to the # the container network interface # Options: # # - bridged # Uses a linux bridge to interconnect the container interface to # the VM. Works for most cases except macvlan and ipvlan. # # - macvtap # Used when the Container network interface can be bridged using # macvtap. # # - none # Used when customize network. Only creates a tap device. No veth pair. # # - tcfilter # Uses tc filter rules to redirect traffic from the network interface # provided by plugin to a tap interface connected to the VM. # internetworking_model="macvtap" # disable guest seccomp # Determines whether container seccomp profiles are passed to the virtual # machine and applied by the kata agent. If set to true, seccomp is not applied # within the guest # (default: true) disable_guest_seccomp=true # If enabled, the runtime will create opentracing.io traces and spans. # (See https://www.jaegertracing.io/docs/getting-started). # (default: disabled) #enable_tracing = true # If enabled, the runtime will not create a network namespace for shim and hypervisor processes. # This option may have some potential impacts to your host. It should only be used when you know what you're doing. # `disable_new_netns` conflicts with `enable_netmon` # `disable_new_netns` conflicts with `internetworking_model=bridged` and `internetworking_model=macvtap`. It works only # with `internetworking_model=none`. The tap device will be in the host network namespace and can connect to a bridge # (like OVS) directly. # If you are using docker, `disable_new_netns` only works with `docker run --net=none` # (default: false) #disable_new_netns = true # Enabled experimental feature list, format: ["a", "b"]. # Experimental features are features not stable enough for production, # They may break compatibility, and are prepared for a big version bump. # Supported experimental features: # 1. "newstore": new persist storage driver which breaks backward compatibility, # expected to move out of experimental in 2.0.0. # (default: []) experimental=[] ``` Config file `/usr/share/defaults/kata-containers/configuration.toml` not found --- # KSM throttler ## version Output of "` --version`": ``` kata-collect-data.sh: line 178: --version: command not found ``` ## systemd service # Image details ```yaml --- osbuilder: url: "https://github.com/kata-containers/osbuilder" version: "unknown" rootfs-creation-time: "2019-07-20T18:43:02.600522601+0000Z" description: "osbuilder rootfs" file-format-version: "0.0.2" architecture: "x86_64" base-distro: name: "Clear" version: "30450" packages: default: - "chrony" - "iptables-bin" - "libudev0-shim" - "systemd" - "util-linux-bin" extra: agent: url: "https://github.com/kata-containers/agent" name: "kata-agent" version: "1.7.4-6a96cd09061ce3babdfcdd1b06d809aeec5037be" agent-is-init-daemon: "no" ``` --- # Initrd details No initrd --- # Logfiles ## Runtime logs No recent runtime problems found in system journal. ## Proxy logs No recent proxy problems found in system journal. ## Shim logs No recent shim problems found in system journal. ## Throttler logs No recent throttler problems found in system journal. --- # Container manager details No `docker` Have `kubectl` ## Kubernetes Output of "`kubectl version`": ``` Client Version: version.Info{Major:"1", Minor:"13", GitVersion:"v1.13.4", GitCommit:"c27b913fddd1a6c480c229191a087698aa92f0b1", GitTreeState:"clean", BuildDate:"2019-02-28T13:37:52Z", GoVersion:"go1.11.5", Compiler:"gc", Platform:"linux/amd64"} Server Version: version.Info{Major:"1", Minor:"13", GitVersion:"v1.13.4", GitCommit:"c27b913fddd1a6c480c229191a087698aa92f0b1", GitTreeState:"clean", BuildDate:"2019-02-28T13:30:26Z", GoVersion:"go1.11.5", Compiler:"gc", Platform:"linux/amd64"} ``` Output of "`kubectl config view`": ``` apiVersion: v1 clusters: - cluster: certificate-authority-data: DATA+OMITTED server: https://xx:6443 name: kubernetes contexts: - context: cluster: kubernetes user: kubernetes-admin name: kubernetes-admin@kubernetes current-context: kubernetes-admin@kubernetes kind: Config preferences: {} users: - name: kubernetes-admin user: client-certificate-data: REDACTED client-key-data: REDACTED ``` Output of "`systemctl show kubelet`": ``` Restart=no NotifyAccess=none RestartUSec=100ms TimeoutStartUSec=1min 30s TimeoutStopUSec=1min 30s WatchdogUSec=0 WatchdogTimestampMonotonic=0 StartLimitInterval=10000000 StartLimitBurst=5 StartLimitAction=none FailureAction=none PermissionsStartOnly=no RootDirectoryStartOnly=no RemainAfterExit=no GuessMainPID=yes MainPID=0 ControlPID=0 FileDescriptorStoreMax=0 StatusErrno=0 Result=success ExecMainStartTimestampMonotonic=0 ExecMainExitTimestampMonotonic=0 ExecMainPID=0 ExecMainCode=0 ExecMainStatus=0 MemoryCurrent=18446744073709551615 TasksCurrent=18446744073709551615 Delegate=no CPUAccounting=no CPUShares=18446744073709551615 StartupCPUShares=18446744073709551615 CPUQuotaPerSecUSec=infinity BlockIOAccounting=no BlockIOWeight=18446744073709551615 StartupBlockIOWeight=18446744073709551615 MemoryAccounting=no MemoryLimit=18446744073709551615 DevicePolicy=auto TasksAccounting=no TasksMax=18446744073709551615 UMask=0022 LimitCPU=18446744073709551615 LimitFSIZE=18446744073709551615 LimitDATA=18446744073709551615 LimitSTACK=18446744073709551615 LimitCORE=18446744073709551615 LimitRSS=18446744073709551615 LimitNOFILE=65536 LimitAS=18446744073709551615 LimitNPROC=767759 LimitMEMLOCK=65536 LimitLOCKS=18446744073709551615 LimitSIGPENDING=767759 LimitMSGQUEUE=819200 LimitNICE=0 LimitRTPRIO=0 LimitRTTIME=18446744073709551615 OOMScoreAdjust=0 Nice=0 IOScheduling=0 CPUSchedulingPolicy=0 CPUSchedulingPriority=0 TimerSlackNSec=50000 CPUSchedulingResetOnFork=no NonBlocking=no StandardInput=null StandardOutput=inherit StandardError=inherit TTYReset=no TTYVHangup=no TTYVTDisallocate=no SyslogPriority=30 SyslogLevelPrefix=yes SecureBits=0 CapabilityBoundingSet=18446744073709551615 AmbientCapabilities=0 MountFlags=0 PrivateTmp=no PrivateNetwork=no PrivateDevices=no ProtectHome=no ProtectSystem=no SameProcessGroup=no IgnoreSIGPIPE=yes NoNewPrivileges=no SystemCallErrorNumber=0 RuntimeDirectoryMode=0755 KillMode=control-group KillSignal=15 SendSIGKILL=yes SendSIGHUP=no Id=kubelet.service Names=kubelet.service Description=kubelet.service LoadState=not-found ActiveState=inactive SubState=dead InactiveExitTimestampMonotonic=0 ActiveEnterTimestampMonotonic=0 ActiveExitTimestampMonotonic=0 InactiveEnterTimestampMonotonic=0 CanStart=yes CanStop=yes CanReload=no CanIsolate=no StopWhenUnneeded=no RefuseManualStart=no RefuseManualStop=no AllowIsolate=no DefaultDependencies=yes OnFailureJobMode=replace IgnoreOnIsolate=no IgnoreOnSnapshot=no NeedDaemonReload=no JobTimeoutUSec=0 JobTimeoutAction=none ConditionResult=no AssertResult=no ConditionTimestampMonotonic=0 AssertTimestampMonotonic=0 LoadError=org.freedesktop.DBus.Error.FileNotFound "No such file or directory" Transient=no ``` No `crio` Have `containerd` ## containerd Output of "`containerd --version`": ``` containerd github.com/containerd/containerd v1.3.0-beta.2 640860a042b93c26c0a33081ee02230def486f81 ``` Output of "`systemctl show containerd`": ``` Type=simple Restart=always NotifyAccess=none RestartUSec=5s TimeoutStartUSec=1min 30s TimeoutStopUSec=1min 30s WatchdogUSec=0 WatchdogTimestamp=Thu 2019-09-05 08:00:09 GMT WatchdogTimestampMonotonic=31348684 StartLimitInterval=10000000 StartLimitBurst=5 StartLimitAction=none FailureAction=none PermissionsStartOnly=no RootDirectoryStartOnly=no RemainAfterExit=no GuessMainPID=yes MainPID=9159 ControlPID=0 FileDescriptorStoreMax=0 StatusErrno=0 Result=success ExecMainStartTimestamp=Thu 2019-09-05 08:00:09 GMT ExecMainStartTimestampMonotonic=31348626 ExecMainExitTimestampMonotonic=0 ExecMainPID=9159 ExecMainCode=0 ExecMainStatus=0 ExecStartPre={ path=/sbin/modprobe ; argv[]=/sbin/modprobe overlay ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 } ExecStart={ path=/usr/local/bin/containerd ; argv[]=/usr/local/bin/containerd ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 } Slice=system.slice ControlGroup=/system.slice/containerd.service MemoryCurrent=266981376 TasksCurrent=241 Delegate=yes CPUAccounting=no CPUShares=18446744073709551615 StartupCPUShares=18446744073709551615 CPUQuotaPerSecUSec=infinity BlockIOAccounting=no BlockIOWeight=18446744073709551615 StartupBlockIOWeight=18446744073709551615 MemoryAccounting=no MemoryLimit=18446744073709551615 DevicePolicy=auto TasksAccounting=no TasksMax=18446744073709551615 UMask=0022 LimitCPU=18446744073709551615 LimitFSIZE=18446744073709551615 LimitDATA=18446744073709551615 LimitSTACK=18446744073709551615 LimitCORE=18446744073709551615 LimitRSS=18446744073709551615 LimitNOFILE=1048576 LimitAS=18446744073709551615 LimitNPROC=18446744073709551615 LimitMEMLOCK=65536 LimitLOCKS=18446744073709551615 LimitSIGPENDING=767759 LimitMSGQUEUE=819200 LimitNICE=0 LimitRTPRIO=0 LimitRTTIME=18446744073709551615 OOMScoreAdjust=-999 Nice=0 IOScheduling=0 CPUSchedulingPolicy=0 CPUSchedulingPriority=0 TimerSlackNSec=50000 CPUSchedulingResetOnFork=no NonBlocking=no StandardInput=null StandardOutput=journal StandardError=inherit TTYReset=no TTYVHangup=no TTYVTDisallocate=no SyslogPriority=30 SyslogLevelPrefix=yes SecureBits=0 CapabilityBoundingSet=18446744073709551615 AmbientCapabilities=0 MountFlags=0 PrivateTmp=no PrivateNetwork=no PrivateDevices=no ProtectHome=no ProtectSystem=no SameProcessGroup=no IgnoreSIGPIPE=yes NoNewPrivileges=no SystemCallErrorNumber=0 RuntimeDirectoryMode=0755 KillMode=process KillSignal=15 SendSIGKILL=yes SendSIGHUP=no Id=containerd.service Names=containerd.service Requires=basic.target Wants=system.slice WantedBy=multi-user.target Conflicts=shutdown.target Before=multi-user.target shutdown.target After=network.target systemd-journald.socket system.slice basic.target Documentation=https://containerd.io Description=containerd container runtime LoadState=loaded ActiveState=active SubState=running FragmentPath=/etc/systemd/system/containerd.service UnitFileState=enabled UnitFilePreset=disabled InactiveExitTimestamp=Thu 2019-09-05 08:00:09 GMT InactiveExitTimestampMonotonic=31343610 ActiveEnterTimestamp=Thu 2019-09-05 08:00:09 GMT ActiveEnterTimestampMonotonic=31348719 ActiveExitTimestamp=Thu 2019-09-05 08:00:09 GMT ActiveExitTimestampMonotonic=31288886 InactiveEnterTimestamp=Thu 2019-09-05 08:00:09 GMT InactiveEnterTimestampMonotonic=31339383 CanStart=yes CanStop=yes CanReload=no CanIsolate=no StopWhenUnneeded=no RefuseManualStart=no RefuseManualStop=no AllowIsolate=no DefaultDependencies=yes OnFailureJobMode=replace IgnoreOnIsolate=no IgnoreOnSnapshot=no NeedDaemonReload=no JobTimeoutUSec=0 JobTimeoutAction=none ConditionResult=yes AssertResult=yes ConditionTimestamp=Thu 2019-09-05 08:00:09 GMT ConditionTimestampMonotonic=31341334 AssertTimestamp=Thu 2019-09-05 08:00:09 GMT AssertTimestampMonotonic=31341335 Transient=no ``` Output of "`cat /etc/containerd/config.toml`": ``` root = "/data/lib/containerd" state = "/data/run/containerd" [plugins] [plugins.cri] sandbox_image = "***/pause:3.1" [plugins.cri.containerd] no_pivot = false snapshotter = "devmapper" [plugins.cri.containerd.runtimes] [plugins.cri.containerd.runtimes.untrusted] runtime_type = "io.containerd.kata.v2" privileged_without_host_devices = true [plugins.devmapper] pool_name = "containerd-thinpool" base_image_size = "20480MB" ``` --- # Packages No `dpkg` Have `rpm` Output of "`rpm -qa|egrep "(cc-oci-runtimecc-runtimerunv|kata-proxy|kata-runtime|kata-shim|kata-ksm-throttler|kata-containers-image|linux-container|qemu-)"`": ``` qemu-kvm-1.5.3-160.el7_6.3.x86_64 qemu-kvm-common-1.5.3-160.el7_6.3.x86_64 qemu-img-1.5.3-160.el7_6.3.x86_64 ipxe-roms-qemu-20170123-1.git4e85b27.el7_4.1.noarch ``` ---

kata-containers / runtime

Devicemapper device leak with container restart of a crashed pod #2031

Description of problem

Expected result

Actual result