search

kata-containers / runtime

Kata Containers version 1.x runtime (for version 2.x see https://github.com/kata-containers/kata-containers).
https://katacontainers.io/
Apache License 2.0
2.1k stars 375 forks source link

9pfs hangs when using certain images on 1.12.0-alpha1 #2978

Closed awprice closed 3 years ago

awprice commented 4 years ago

Description of problem

When running the following pod spec under Kata 1.12.0-alpha1, we experience 9pfs "hanging" when trying to read files that are on the kataShared (9pfs) file system, i.e. /etc/resolv.conf.

I think this is an issue on QEMU 5.0, likely resolved in 5.1.

Steps to reproduce

Run the following pod spec:

apiVersion: v1
kind: Pod
metadata:
  name: test
  namespace: default
spec:
  runtimeClassName: kata
  containers:
    - image: ubuntu:18.04
      name: sleep
      command:
        - sleep
        - "86400"
    - image: postgres:9.6-alpine
      imagePullPolicy: Always
      name: postgres
      env:
        - name: POSTGRES_PASSWORD
          value: postgres
        - name: POSTGRES_USER
          value: postgres
        - name: POSTGRES_DB
          value: foobar

Once the pod is running, exec into the "sleep" pod and open a file that is on the kataShared filesystem:

$ kubectl exec -it test -c sleep -- bash
root@test:/# cat /etc/resolv.conf
(command hangs here)

Expected result

I expect the above commands to work without hanging.

Actual result

The commands hang when opening files that are on the kataShared filesystem.

We see the following messages in the qemu.log: 

# cat qemu.log 
warning: Opening a block device as a file using the 'file' driver is deprecated
warning: Opening a block device as a file using the 'file' driver is deprecated
warning: Opening a block device as a file using the 'file' driver is deprecated
qemu-virtiofs-system-x86_64: VirtFS reply type 117 needs 14 bytes, buffer has 14, less than minimum

Further information

I managed to locate the following bug report for QEMU: https://bugs.launchpad.net/qemu/+bug/1877688

And it seems to contain a similar situation to mine:

Reading certain files on a 9p mounted FS produces this error message: qemu-system-x86_64: VirtFS reply type 117 needs 12 bytes, buffer has 12, less than minimum After this error message is generated, further accesses to the 9p FS hangs whatever tries to access it.

It suggests in that issue that upgrading to QEMU 5.1 will resolve the issue:

Fixed in QEMU 5.1 release.

Either removing the "postgres" container from the pod or updating it's image to something different, i.e. postgres:9.6, the issue does not occur.

This postgres image has a VOLUME defined in it's Dockerfile - https://github.com/docker-library/postgres/blob/fdf884a12fe3de9b87403663e5e85548ab445bf5/9.6/alpine/Dockerfile#L143 and this is provisioned on 9pfs.

I'm not entirely sure what is happening in the postgres:9.6-alpine image to cause it to get into this state 😢

Show kata-collect-data.sh details

# Meta details Running `kata-collect-data.sh` version `1.12.0-alpha1 (commit 2be92dd721363a9d204bb67b3276dde596b7d090)` at `2020-09-22.09:47:00.341431675+0000`. --- Runtime is `/opt/kata/bin/kata-runtime`. # `kata-env` Output of "`/opt/kata/bin/kata-runtime kata-env`": ```toml [Meta] Version = "1.0.24" [Runtime] Debug = true Trace = false DisableGuestSeccomp = true DisableNewNetNs = false SandboxCgroupOnly = false Path = "/opt/kata/bin/kata-runtime" [Runtime.Version] OCI = "1.0.1-dev" [Runtime.Version.Version] Semver = "1.12.0-alpha1" Major = 1 Minor = 12 Patch = 0 Commit = "2be92dd721363a9d204bb67b3276dde596b7d090-dirty" [Runtime.Config] Path = "/etc/kata-containers/configuration.toml" [Hypervisor] MachineType = "pc" Version = "QEMU emulator version 5.0.0 (kata-static)\nCopyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers" Path = "/opt/kata/bin/qemu-virtiofs-system-x86_64" BlockDeviceDriver = "virtio-scsi" EntropySource = "/dev/urandom" SharedFS = "virtio-9p" VirtioFSDaemon = "/opt/kata/bin/virtiofsd" Msize9p = 8192 MemorySlots = 10 PCIeRootPort = 0 HotplugVFIOOnRootBus = false Debug = true UseVSock = false [Image] Path = "/opt/kata/share/kata-containers/kata-containers-ubuntu-console-1.12.0-alpha1-797a5070a.img" [Kernel] Path = "/opt/kata/share/kata-containers/vmlinuz-kata-v5.6-april-09-2020-88-virtiofs" Parameters = "systemd.unit=kata-containers.target systemd.mask=systemd-networkd.service systemd.mask=systemd-networkd.socket scsi_mod.scan=none agent.log=debug vsyscall=emulate agent.hotplug_timeout=10s agent.container_pipe_size=2097152" [Initrd] Path = "" [Proxy] Type = "kataProxy" Path = "/opt/kata/libexec/kata-containers/kata-proxy" Debug = true [Proxy.Version] Semver = "1.12.0-alpha1-c604a60738ddee942bc3f06e452f74b715bc2e86" Major = 1 Minor = 12 Patch = 0 Commit = "<>" [Shim] Type = "kataShim" Path = "/opt/kata/libexec/kata-containers/kata-shim" Debug = true [Shim.Version] Semver = "1.12.0-alpha1-d6df720fe8ac0ede4333927cbd3d5ee53c51b222" Major = 1 Minor = 12 Patch = 0 Commit = "<>" [Agent] Type = "kata" Debug = true Trace = false TraceMode = "" TraceType = "" [Host] Kernel = "4.19.143-flatcar" Architecture = "amd64" VMContainerCapable = true SupportVSocks = true [Host.Distro] Name = "Flatcar Container Linux by Kinvolk" Version = "2512.4.0" [Host.CPU] Vendor = "GenuineIntel" Model = "Intel(R) Xeon(R) Platinum 8175M CPU @ 2.50GHz" [Netmon] Path = "/opt/kata/libexec/kata-containers/kata-netmon" Debug = true Enable = false [Netmon.Version] Semver = "1.12.0-alpha1" Major = 1 Minor = 12 Patch = 0 Commit = "<>" ``` --- # Runtime config files ## Runtime default config files ``` /etc/kata-containers/configuration.toml /usr/share/defaults/kata-containers/configuration.toml ``` ## Runtime config file contents Output of "`cat "/etc/kata-containers/configuration.toml"`": ```toml # Copyright (c) 2017-2019 Intel Corporation # # SPDX-License-Identifier: Apache-2.0 # # XXX: WARNING: this file is auto-generated. # XXX: # XXX: Source file: "cli/config/configuration-qemu-virtiofs.toml.in" # XXX: Project: # XXX: Name: Kata Containers # XXX: Type: kata [hypervisor.qemu] path = "/opt/kata/bin/qemu-virtiofs-system-x86_64" kernel = "/opt/kata/share/kata-containers/vmlinuz-virtiofs.container" image = "/opt/kata/share/kata-containers/kata-containers.img" machine_type = "pc" # Optional space-separated list of options to pass to the guest kernel. # For example, use `kernel_params = "vsyscall=emulate"` if you are having # trouble running pre-2.15 glibc. # # WARNING: - any parameter specified here will take priority over the default # parameter value of the same name used to start the virtual machine. # Do not set values here unless you understand the impact of doing so as you # may stop the virtual machine from booting. # To see the list of default parameters, enable hypervisor debug, create a # container and look for 'default-kernel-parameters' log entries. kernel_params = "vsyscall=emulate agent.hotplug_timeout=10s agent.container_pipe_size=2097152" # Path to the firmware. # If you want that qemu uses the default firmware leave this option empty firmware = "" # Machine accelerators # comma-separated list of machine accelerators to pass to the hypervisor. # For example, `machine_accelerators = "nosmm,nosmbus,nosata,nopit,static-prt,nofw"` machine_accelerators="" # CPU features # comma-separated list of cpu features to pass to the cpu # For example, `cpu_features = "pmu=off,vmx=off" cpu_features="pmu=on" # Default number of vCPUs per SB/VM: # unspecified or 0 --> will be set to 1 # < 0 --> will be set to the actual number of physical cores # > 0 <= number of physical cores --> will be set to the specified number # > number of physical cores --> will be set to the actual number of physical cores default_vcpus = 8 # Default maximum number of vCPUs per SB/VM: # unspecified or == 0 --> will be set to the actual number of physical cores or to the maximum number # of vCPUs supported by KVM if that number is exceeded # > 0 <= number of physical cores --> will be set to the specified number # > number of physical cores --> will be set to the actual number of physical cores or to the maximum number # of vCPUs supported by KVM if that number is exceeded # WARNING: Depending of the architecture, the maximum number of vCPUs supported by KVM is used when # the actual number of physical cores is greater than it. # WARNING: Be aware that this value impacts the virtual machine's memory footprint and CPU # the hotplug functionality. For example, `default_maxvcpus = 240` specifies that until 240 vCPUs # can be added to a SB/VM, but the memory footprint will be big. Another example, with # `default_maxvcpus = 8` the memory footprint will be small, but 8 will be the maximum number of # vCPUs supported by the SB/VM. In general, we recommend that you do not edit this variable, # unless you know what are you doing. # NOTICE: on arm platform with gicv2 interrupt controller, set it to 8. default_maxvcpus = 8 # Bridges can be used to hot plug devices. # Limitations: # * Currently only pci bridges are supported # * Until 30 devices per bridge can be hot plugged. # * Until 5 PCI bridges can be cold plugged per VM. # This limitation could be a bug in qemu or in the kernel # Default number of bridges per SB/VM: # unspecified or 0 --> will be set to 1 # > 1 <= 5 --> will be set to the specified number # > 5 --> will be set to 5 default_bridges = 1 # Default memory size in MiB for SB/VM. # If unspecified then it will be set 2048 MiB. default_memory = 768 # # Default memory slots per SB/VM. # If unspecified then it will be set 10. # This is will determine the times that memory will be hotadded to sandbox/VM. #memory_slots = 10 # The size in MiB will be plused to max memory of hypervisor. # It is the memory address space for the NVDIMM devie. # If set block storage driver (block_device_driver) to "nvdimm", # should set memory_offset to the size of block device. # Default 0 #memory_offset = 0 # Disable block device from being used for a container's rootfs. # In case of a storage driver like devicemapper where a container's # root file system is backed by a block device, the block device is passed # directly to the hypervisor for performance reasons. # This flag prevents the block device from being passed to the hypervisor, # 9pfs is used instead to pass the rootfs. disable_block_device_use = false # Shared file system type: # - virtio-fs (default) # - virtio-9p shared_fs = "virtio-9p" # Path to vhost-user-fs daemon. virtio_fs_daemon = "/opt/kata/bin/virtiofsd" # Default size of DAX cache in MiB virtio_fs_cache_size = 1024 # Extra args for virtiofsd daemon # # Format example: # ["-o", "arg1=xxx,arg2", "-o", "hello world", "--arg3=yyy"] # # see `virtiofsd -h` for possible options. virtio_fs_extra_args = [] # Cache mode: # # - none # Metadata, data, and pathname lookup are not cached in guest. They are # always fetched from host and any changes are immediately pushed to host. # # - auto # Metadata and pathname lookup cache expires after a configured amount of # time (default is 1 second). Data is cached while the file is open (close # to open consistency). # # - always # Metadata, data, and pathname lookup are cached in guest and never expire. virtio_fs_cache = "none" # Block storage driver to be used for the hypervisor in case the container # rootfs is backed by a block device. This is virtio-scsi, virtio-blk # or nvdimm. block_device_driver = "virtio-scsi" # Specifies cache-related options will be set to block devices or not. # Default false block_device_cache_set = true # Specifies cache-related options for block devices. # Denotes whether use of O_DIRECT (bypass the host page cache) is enabled. # Default false block_device_cache_direct = true # Specifies cache-related options for block devices. # Denotes whether flush requests for the device are ignored. # Default false #block_device_cache_noflush = true # Enable iothreads (data-plane) to be used. This causes IO to be # handled in a separate IO thread. This is currently only implemented # for SCSI. # enable_iothreads = false # Enable pre allocation of VM RAM, default false # Enabling this will result in lower container density # as all of the memory will be allocated and locked # This is useful when you want to reserve all the memory # upfront or in the cases where you want memory latencies # to be very predictable # Default false #enable_mem_prealloc = true # Enable huge pages for VM RAM, default false # Enabling this will result in the VM memory # being allocated using huge pages. # This is useful when you want to use vhost-user network # stacks within the container. This will automatically # result in memory pre allocation #enable_hugepages = true # Enable vhost-user storage device, default false # Enabling this will result in some Linux reserved block type # major range 240-254 being chosen to represent vhost-user devices. enable_vhost_user_store = false # The base directory specifically used for vhost-user devices. # Its sub-path "block" is used for block devices; "block/sockets" is # where we expect vhost-user sockets to live; "block/devices" is where # simulated block device nodes for vhost-user devices to live. vhost_user_store_path = "/var/run/kata-containers/vhost-user" # Enable vIOMMU, default false # Enabling this will result in the VM having a vIOMMU device # This will also add the following options to the kernel's # command line: intel_iommu=on,iommu=pt #enable_iommu = true # Enable IOMMU_PLATFORM, default false # Enabling this will result in the VM device having iommu_platform=on set #enable_iommu_platform = true # Enable file based guest memory support. The default is an empty string which # will disable this feature. In the case of virtio-fs, this is enabled # automatically and '/dev/shm' is used as the backing folder. # This option will be ignored if VM templating is enabled. #file_mem_backend = "" # Enable swap of vm memory. Default false. # The behaviour is undefined if mem_prealloc is also set to true #enable_swap = true # This option changes the default hypervisor and kernel parameters # to enable debug output where available. This extra output is added # to the proxy logs, but only when proxy debug is also enabled. # # Default false enable_debug = true # Disable the customizations done in the runtime when it detects # that it is running on top a VMM. This will result in the runtime # behaving as it would when running on bare metal. # #disable_nesting_checks = true # This is the msize used for 9p shares. It is the number of bytes # used for 9p packet payload. #msize_9p = 8192 # If true and vsocks are supported, use vsocks to communicate directly # with the agent and no proxy is started, otherwise use unix # sockets and start a proxy to communicate with the agent. # Default false #use_vsock = true # If false and nvdimm is supported, use nvdimm device to plug guest image. # Otherwise virtio-block device is used. # Default false #disable_image_nvdimm = true # VFIO devices are hotplugged on a bridge by default. # Enable hotplugging on root bus. This may be required for devices with # a large PCI bar, as this is a current limitation with hotplugging on # a bridge. This value is valid for "pc" machine type. # Default false #hotplug_vfio_on_root_bus = true # If vhost-net backend for virtio-net is not desired, set to true. Default is false, which trades off # security (vhost-net runs ring0) for network I/O performance. #disable_vhost_net = true # # Default entropy source. # The path to a host source of entropy (including a real hardware RNG) # /dev/urandom and /dev/random are two main options. # Be aware that /dev/random is a blocking source of entropy. If the host # runs out of entropy, the VMs boot time will increase leading to get startup # timeouts. # The source of entropy /dev/urandom is non-blocking and provides a # generally acceptable source of entropy. It should work well for pretty much # all practical purposes. #entropy_source= "/dev/urandom" # Path to OCI hook binaries in the *guest rootfs*. # This does not affect host-side hooks which must instead be added to # the OCI spec passed to the runtime. # # You can create a rootfs with hooks by customizing the osbuilder scripts: # https://github.com/kata-containers/osbuilder # # Hooks must be stored in a subdirectory of guest_hook_path according to their # hook type, i.e. "guest_hook_path/{prestart,postart,poststop}". # The agent will scan these directories for executable files and add them, in # lexicographical order, to the lifecycle of the guest container. # Hooks are executed in the runtime namespace of the guest. See the official documentation: # https://github.com/opencontainers/runtime-spec/blob/v1.0.1/config.md#posix-platform-hooks # Warnings will be logged if any error is encountered will scanning for hooks, # but it will not abort container execution. #guest_hook_path = "/usr/share/oci/hooks" [factory] # VM templating support. Once enabled, new VMs are created from template # using vm cloning. They will share the same initial kernel, initramfs and # agent memory by mapping it readonly. It helps speeding up new container # creation and saves a lot of memory if there are many kata containers running # on the same host. # # When disabled, new VMs are created from scratch. # # Note: Requires "initrd=" to be set ("image=" is not supported). # # Default false #enable_template = true # Specifies the path of template. # # Default "/run/vc/vm/template" #template_path = "/run/vc/vm/template" # The number of caches of VMCache: # unspecified or == 0 --> VMCache is disabled # > 0 --> will be set to the specified number # # VMCache is a function that creates VMs as caches before using it. # It helps speed up new container creation. # The function consists of a server and some clients communicating # through Unix socket. The protocol is gRPC in protocols/cache/cache.proto. # The VMCache server will create some VMs and cache them by factory cache. # It will convert the VM to gRPC format and transport it when gets # requestion from clients. # Factory grpccache is the VMCache client. It will request gRPC format # VM and convert it back to a VM. If VMCache function is enabled, # kata-runtime will request VM from factory grpccache when it creates # a new sandbox. # # Default 0 #vm_cache_number = 0 # Specify the address of the Unix socket that is used by VMCache. # # Default /var/run/kata-containers/cache.sock #vm_cache_endpoint = "/var/run/kata-containers/cache.sock" [proxy.kata] path = "/opt/kata/libexec/kata-containers/kata-proxy" # If enabled, proxy messages will be sent to the system log # (default: disabled) enable_debug = true [shim.kata] path = "/opt/kata/libexec/kata-containers/kata-shim" # If enabled, shim messages will be sent to the system log # (default: disabled) enable_debug = true # If enabled, the shim will create opentracing.io traces and spans. # (See https://www.jaegertracing.io/docs/getting-started). # # Note: By default, the shim runs in a separate network namespace. Therefore, # to allow it to send trace details to the Jaeger agent running on the host, # it is necessary to set 'disable_new_netns=true' so that it runs in the host # network namespace. # # (default: disabled) #enable_tracing = true [agent.kata] # If enabled, make the agent display debug-level messages. # (default: disabled) enable_debug = true # Enable agent tracing. # # If enabled, the default trace mode is "dynamic" and the # default trace type is "isolated". The trace mode and type are set # explicity with the `trace_type=` and `trace_mode=` options. # # Notes: # # - Tracing is ONLY enabled when `enable_tracing` is set: explicitly # setting `trace_mode=` and/or `trace_type=` without setting `enable_tracing` # will NOT activate agent tracing. # # - See https://github.com/kata-containers/agent/blob/master/TRACING.md for # full details. # # (default: disabled) #enable_tracing = true # #trace_mode = "dynamic" #trace_type = "isolated" # Comma separated list of kernel modules and their parameters. # These modules will be loaded in the guest kernel using modprobe(8). # The following example can be used to load two kernel modules with parameters # - kernel_modules=["e1000e InterruptThrottleRate=3000,3000,3000 EEE=1", "i915 enable_ppgtt=0"] # The first word is considered as the module name and the rest as its parameters. # Container will not be started when: # * A kernel module is specified and the modprobe command is not installed in the guest # or it fails loading the module. # * The module is not available in the guest or it doesn't met the guest kernel # requirements, like architecture and version. # kernel_modules=[] [netmon] # If enabled, the network monitoring process gets started when the # sandbox is created. This allows for the detection of some additional # network being added to the existing network namespace, after the # sandbox has been created. # (default: disabled) #enable_netmon = true # Specify the path to the netmon binary. path = "/opt/kata/libexec/kata-containers/kata-netmon" # If enabled, netmon messages will be sent to the system log # (default: disabled) enable_debug = true [runtime] # If enabled, the runtime will log additional debug messages to the # system log # (default: disabled) enable_debug = true # # Internetworking model # Determines how the VM should be connected to the # the container network interface # Options: # # - bridged (Deprecated) # Uses a linux bridge to interconnect the container interface to # the VM. Works for most cases except macvlan and ipvlan. # ***NOTE: This feature has been deprecated with plans to remove this # feature in the future. Please use other network models listed below. # # - macvtap # Used when the Container network interface can be bridged using # macvtap. # # - none # Used when customize network. Only creates a tap device. No veth pair. # # - tcfilter # Uses tc filter rules to redirect traffic from the network interface # provided by plugin to a tap interface connected to the VM. # internetworking_model="tcfilter" # disable guest seccomp # Determines whether container seccomp profiles are passed to the virtual # machine and applied by the kata agent. If set to true, seccomp is not applied # within the guest # (default: true) disable_guest_seccomp=true # If enabled, the runtime will create opentracing.io traces and spans. # (See https://www.jaegertracing.io/docs/getting-started). # (default: disabled) #enable_tracing = true # If enabled, the runtime will not create a network namespace for shim and hypervisor processes. # This option may have some potential impacts to your host. It should only be used when you know what you're doing. # `disable_new_netns` conflicts with `enable_netmon` # `disable_new_netns` conflicts with `internetworking_model=bridged` and `internetworking_model=macvtap`. It works only # with `internetworking_model=none`. The tap device will be in the host network namespace and can connect to a bridge # (like OVS) directly. # If you are using docker, `disable_new_netns` only works with `docker run --net=none` # (default: false) #disable_new_netns = true # if enabled, the runtime will add all the kata processes inside one dedicated cgroup. # The container cgroups in the host are not created, just one single cgroup per sandbox. # The runtime caller is free to restrict or collect cgroup stats of the overall Kata sandbox. # The sandbox cgroup path is the parent cgroup of a container with the PodSandbox annotation. # The sandbox cgroup is constrained if there is no container type annotation. # See: https://godoc.org/github.com/kata-containers/runtime/virtcontainers#ContainerType sandbox_cgroup_only=false # Enabled experimental feature list, format: ["a", "b"]. # Experimental features are features not stable enough for production, # they may break compatibility, and are prepared for a big version bump. # Supported experimental features: # (default: []) experimental=[] ``` Output of "`cat "/opt/kata/share/defaults/kata-containers/configuration.toml"`": ```toml # Copyright (c) 2017-2019 Intel Corporation # # SPDX-License-Identifier: Apache-2.0 # # XXX: WARNING: this file is auto-generated. # XXX: # XXX: Source file: "cli/config/configuration-qemu.toml.in" # XXX: Project: # XXX: Name: Kata Containers # XXX: Type: kata [hypervisor.qemu] path = "/opt/kata/bin/qemu-system-x86_64" kernel = "/opt/kata/share/kata-containers/vmlinuz.container" image = "/opt/kata/share/kata-containers/kata-containers.img" machine_type = "pc" # Optional space-separated list of options to pass to the guest kernel. # For example, use `kernel_params = "vsyscall=emulate"` if you are having # trouble running pre-2.15 glibc. # # WARNING: - any parameter specified here will take priority over the default # parameter value of the same name used to start the virtual machine. # Do not set values here unless you understand the impact of doing so as you # may stop the virtual machine from booting. # To see the list of default parameters, enable hypervisor debug, create a # container and look for 'default-kernel-parameters' log entries. kernel_params = "" # Path to the firmware. # If you want that qemu uses the default firmware leave this option empty firmware = "" # Machine accelerators # comma-separated list of machine accelerators to pass to the hypervisor. # For example, `machine_accelerators = "nosmm,nosmbus,nosata,nopit,static-prt,nofw"` machine_accelerators="" # CPU features # comma-separated list of cpu features to pass to the cpu # For example, `cpu_features = "pmu=off,vmx=off" cpu_features="pmu=off" # Default number of vCPUs per SB/VM: # unspecified or 0 --> will be set to 1 # < 0 --> will be set to the actual number of physical cores # > 0 <= number of physical cores --> will be set to the specified number # > number of physical cores --> will be set to the actual number of physical cores default_vcpus = 1 # Default maximum number of vCPUs per SB/VM: # unspecified or == 0 --> will be set to the actual number of physical cores or to the maximum number # of vCPUs supported by KVM if that number is exceeded # > 0 <= number of physical cores --> will be set to the specified number # > number of physical cores --> will be set to the actual number of physical cores or to the maximum number # of vCPUs supported by KVM if that number is exceeded # WARNING: Depending of the architecture, the maximum number of vCPUs supported by KVM is used when # the actual number of physical cores is greater than it. # WARNING: Be aware that this value impacts the virtual machine's memory footprint and CPU # the hotplug functionality. For example, `default_maxvcpus = 240` specifies that until 240 vCPUs # can be added to a SB/VM, but the memory footprint will be big. Another example, with # `default_maxvcpus = 8` the memory footprint will be small, but 8 will be the maximum number of # vCPUs supported by the SB/VM. In general, we recommend that you do not edit this variable, # unless you know what are you doing. # NOTICE: on arm platform with gicv2 interrupt controller, set it to 8. default_maxvcpus = 0 # Bridges can be used to hot plug devices. # Limitations: # * Currently only pci bridges are supported # * Until 30 devices per bridge can be hot plugged. # * Until 5 PCI bridges can be cold plugged per VM. # This limitation could be a bug in qemu or in the kernel # Default number of bridges per SB/VM: # unspecified or 0 --> will be set to 1 # > 1 <= 5 --> will be set to the specified number # > 5 --> will be set to 5 default_bridges = 1 # Default memory size in MiB for SB/VM. # If unspecified then it will be set 2048 MiB. default_memory = 2048 # # Default memory slots per SB/VM. # If unspecified then it will be set 10. # This is will determine the times that memory will be hotadded to sandbox/VM. #memory_slots = 10 # The size in MiB will be plused to max memory of hypervisor. # It is the memory address space for the NVDIMM devie. # If set block storage driver (block_device_driver) to "nvdimm", # should set memory_offset to the size of block device. # Default 0 #memory_offset = 0 # Specifies virtio-mem will be enabled or not. # Please note that this option should be used with the command # "echo 1 > /proc/sys/vm/overcommit_memory". # Default false #enable_virtio_mem = true # Disable block device from being used for a container's rootfs. # In case of a storage driver like devicemapper where a container's # root file system is backed by a block device, the block device is passed # directly to the hypervisor for performance reasons. # This flag prevents the block device from being passed to the hypervisor, # 9pfs is used instead to pass the rootfs. disable_block_device_use = false # Shared file system type: # - virtio-9p (default) # - virtio-fs shared_fs = "virtio-9p" # Path to vhost-user-fs daemon. virtio_fs_daemon = "/opt/kata/bin/virtiofsd" # Default size of DAX cache in MiB virtio_fs_cache_size = 1024 # Extra args for virtiofsd daemon # # Format example: # ["-o", "arg1=xxx,arg2", "-o", "hello world", "--arg3=yyy"] # # see `virtiofsd -h` for possible options. virtio_fs_extra_args = [] # Cache mode: # # - none # Metadata, data, and pathname lookup are not cached in guest. They are # always fetched from host and any changes are immediately pushed to host. # # - auto # Metadata and pathname lookup cache expires after a configured amount of # time (default is 1 second). Data is cached while the file is open (close # to open consistency). # # - always # Metadata, data, and pathname lookup are cached in guest and never expire. virtio_fs_cache = "auto" # Block storage driver to be used for the hypervisor in case the container # rootfs is backed by a block device. This is virtio-scsi, virtio-blk # or nvdimm. block_device_driver = "virtio-scsi" # Specifies cache-related options will be set to block devices or not. # Default false #block_device_cache_set = true # Specifies cache-related options for block devices. # Denotes whether use of O_DIRECT (bypass the host page cache) is enabled. # Default false #block_device_cache_direct = true # Specifies cache-related options for block devices. # Denotes whether flush requests for the device are ignored. # Default false #block_device_cache_noflush = true # Enable iothreads (data-plane) to be used. This causes IO to be # handled in a separate IO thread. This is currently only implemented # for SCSI. # enable_iothreads = false # Enable pre allocation of VM RAM, default false # Enabling this will result in lower container density # as all of the memory will be allocated and locked # This is useful when you want to reserve all the memory # upfront or in the cases where you want memory latencies # to be very predictable # Default false #enable_mem_prealloc = true # Enable huge pages for VM RAM, default false # Enabling this will result in the VM memory # being allocated using huge pages. # This is useful when you want to use vhost-user network # stacks within the container. This will automatically # result in memory pre allocation #enable_hugepages = true # Enable vhost-user storage device, default false # Enabling this will result in some Linux reserved block type # major range 240-254 being chosen to represent vhost-user devices. enable_vhost_user_store = false # The base directory specifically used for vhost-user devices. # Its sub-path "block" is used for block devices; "block/sockets" is # where we expect vhost-user sockets to live; "block/devices" is where # simulated block device nodes for vhost-user devices to live. vhost_user_store_path = "/var/run/kata-containers/vhost-user" # Enable vIOMMU, default false # Enabling this will result in the VM having a vIOMMU device # This will also add the following options to the kernel's # command line: intel_iommu=on,iommu=pt #enable_iommu = true # Enable IOMMU_PLATFORM, default false # Enabling this will result in the VM device having iommu_platform=on set #enable_iommu_platform = true # Enable file based guest memory support. The default is an empty string which # will disable this feature. In the case of virtio-fs, this is enabled # automatically and '/dev/shm' is used as the backing folder. # This option will be ignored if VM templating is enabled. #file_mem_backend = "" # Enable swap of vm memory. Default false. # The behaviour is undefined if mem_prealloc is also set to true #enable_swap = true # This option changes the default hypervisor and kernel parameters # to enable debug output where available. This extra output is added # to the proxy logs, but only when proxy debug is also enabled. # # Default false #enable_debug = true # Disable the customizations done in the runtime when it detects # that it is running on top a VMM. This will result in the runtime # behaving as it would when running on bare metal. # #disable_nesting_checks = true # This is the msize used for 9p shares. It is the number of bytes # used for 9p packet payload. #msize_9p = 8192 # If true and vsocks are supported, use vsocks to communicate directly # with the agent and no proxy is started, otherwise use unix # sockets and start a proxy to communicate with the agent. # Default false #use_vsock = true # If false and nvdimm is supported, use nvdimm device to plug guest image. # Otherwise virtio-block device is used. # Default is false #disable_image_nvdimm = true # VFIO devices are hotplugged on a bridge by default. # Enable hotplugging on root bus. This may be required for devices with # a large PCI bar, as this is a current limitation with hotplugging on # a bridge. This value is valid for "pc" machine type. # Default false #hotplug_vfio_on_root_bus = true # Before hot plugging a PCIe device, you need to add a pcie_root_port device. # Use this parameter when using some large PCI bar devices, such as Nvidia GPU # The value means the number of pcie_root_port # This value is valid when hotplug_vfio_on_root_bus is true and machine_type is "q35" # Default 0 #pcie_root_port = 2 # If vhost-net backend for virtio-net is not desired, set to true. Default is false, which trades off # security (vhost-net runs ring0) for network I/O performance. #disable_vhost_net = true # # Default entropy source. # The path to a host source of entropy (including a real hardware RNG) # /dev/urandom and /dev/random are two main options. # Be aware that /dev/random is a blocking source of entropy. If the host # runs out of entropy, the VMs boot time will increase leading to get startup # timeouts. # The source of entropy /dev/urandom is non-blocking and provides a # generally acceptable source of entropy. It should work well for pretty much # all practical purposes. #entropy_source= "/dev/urandom" # Path to OCI hook binaries in the *guest rootfs*. # This does not affect host-side hooks which must instead be added to # the OCI spec passed to the runtime. # # You can create a rootfs with hooks by customizing the osbuilder scripts: # https://github.com/kata-containers/osbuilder # # Hooks must be stored in a subdirectory of guest_hook_path according to their # hook type, i.e. "guest_hook_path/{prestart,postart,poststop}". # The agent will scan these directories for executable files and add them, in # lexicographical order, to the lifecycle of the guest container. # Hooks are executed in the runtime namespace of the guest. See the official documentation: # https://github.com/opencontainers/runtime-spec/blob/v1.0.1/config.md#posix-platform-hooks # Warnings will be logged if any error is encountered will scanning for hooks, # but it will not abort container execution. #guest_hook_path = "/usr/share/oci/hooks" [factory] # VM templating support. Once enabled, new VMs are created from template # using vm cloning. They will share the same initial kernel, initramfs and # agent memory by mapping it readonly. It helps speeding up new container # creation and saves a lot of memory if there are many kata containers running # on the same host. # # When disabled, new VMs are created from scratch. # # Note: Requires "initrd=" to be set ("image=" is not supported). # # Default false #enable_template = true # Specifies the path of template. # # Default "/run/vc/vm/template" #template_path = "/run/vc/vm/template" # The number of caches of VMCache: # unspecified or == 0 --> VMCache is disabled # > 0 --> will be set to the specified number # # VMCache is a function that creates VMs as caches before using it. # It helps speed up new container creation. # The function consists of a server and some clients communicating # through Unix socket. The protocol is gRPC in protocols/cache/cache.proto. # The VMCache server will create some VMs and cache them by factory cache. # It will convert the VM to gRPC format and transport it when gets # requestion from clients. # Factory grpccache is the VMCache client. It will request gRPC format # VM and convert it back to a VM. If VMCache function is enabled, # kata-runtime will request VM from factory grpccache when it creates # a new sandbox. # # Default 0 #vm_cache_number = 0 # Specify the address of the Unix socket that is used by VMCache. # # Default /var/run/kata-containers/cache.sock #vm_cache_endpoint = "/var/run/kata-containers/cache.sock" [proxy.kata] path = "/opt/kata/libexec/kata-containers/kata-proxy" # If enabled, proxy messages will be sent to the system log # (default: disabled) #enable_debug = true [shim.kata] path = "/opt/kata/libexec/kata-containers/kata-shim" # If enabled, shim messages will be sent to the system log # (default: disabled) #enable_debug = true # If enabled, the shim will create opentracing.io traces and spans. # (See https://www.jaegertracing.io/docs/getting-started). # # Note: By default, the shim runs in a separate network namespace. Therefore, # to allow it to send trace details to the Jaeger agent running on the host, # it is necessary to set 'disable_new_netns=true' so that it runs in the host # network namespace. # # (default: disabled) #enable_tracing = true [agent.kata] # If enabled, make the agent display debug-level messages. # (default: disabled) #enable_debug = true # Enable agent tracing. # # If enabled, the default trace mode is "dynamic" and the # default trace type is "isolated". The trace mode and type are set # explicity with the `trace_type=` and `trace_mode=` options. # # Notes: # # - Tracing is ONLY enabled when `enable_tracing` is set: explicitly # setting `trace_mode=` and/or `trace_type=` without setting `enable_tracing` # will NOT activate agent tracing. # # - See https://github.com/kata-containers/agent/blob/master/TRACING.md for # full details. # # (default: disabled) #enable_tracing = true # #trace_mode = "dynamic" #trace_type = "isolated" # Comma separated list of kernel modules and their parameters. # These modules will be loaded in the guest kernel using modprobe(8). # The following example can be used to load two kernel modules with parameters # - kernel_modules=["e1000e InterruptThrottleRate=3000,3000,3000 EEE=1", "i915 enable_ppgtt=0"] # The first word is considered as the module name and the rest as its parameters. # Container will not be started when: # * A kernel module is specified and the modprobe command is not installed in the guest # or it fails loading the module. # * The module is not available in the guest or it doesn't met the guest kernel # requirements, like architecture and version. # kernel_modules=[] [netmon] # If enabled, the network monitoring process gets started when the # sandbox is created. This allows for the detection of some additional # network being added to the existing network namespace, after the # sandbox has been created. # (default: disabled) #enable_netmon = true # Specify the path to the netmon binary. path = "/opt/kata/libexec/kata-containers/kata-netmon" # If enabled, netmon messages will be sent to the system log # (default: disabled) #enable_debug = true [runtime] # If enabled, the runtime will log additional debug messages to the # system log # (default: disabled) #enable_debug = true # # Internetworking model # Determines how the VM should be connected to the # the container network interface # Options: # # - macvtap # Used when the Container network interface can be bridged using # macvtap. # # - none # Used when customize network. Only creates a tap device. No veth pair. # # - tcfilter # Uses tc filter rules to redirect traffic from the network interface # provided by plugin to a tap interface connected to the VM. # internetworking_model="tcfilter" # disable guest seccomp # Determines whether container seccomp profiles are passed to the virtual # machine and applied by the kata agent. If set to true, seccomp is not applied # within the guest # (default: true) disable_guest_seccomp=true # If enabled, the runtime will create opentracing.io traces and spans. # (See https://www.jaegertracing.io/docs/getting-started). # (default: disabled) #enable_tracing = true # If enabled, the runtime will not create a network namespace for shim and hypervisor processes. # This option may have some potential impacts to your host. It should only be used when you know what you're doing. # `disable_new_netns` conflicts with `enable_netmon` # `disable_new_netns` conflicts with `internetworking_model=tcfilter` and `internetworking_model=macvtap`. It works only # with `internetworking_model=none`. The tap device will be in the host network namespace and can connect to a bridge # (like OVS) directly. # If you are using docker, `disable_new_netns` only works with `docker run --net=none` # (default: false) #disable_new_netns = true # if enabled, the runtime will add all the kata processes inside one dedicated cgroup. # The container cgroups in the host are not created, just one single cgroup per sandbox. # The runtime caller is free to restrict or collect cgroup stats of the overall Kata sandbox. # The sandbox cgroup path is the parent cgroup of a container with the PodSandbox annotation. # The sandbox cgroup is constrained if there is no container type annotation. # See: https://godoc.org/github.com/kata-containers/runtime/virtcontainers#ContainerType sandbox_cgroup_only=false # Enabled experimental feature list, format: ["a", "b"]. # Experimental features are features not stable enough for production, # they may break compatibility, and are prepared for a big version bump. # Supported experimental features: # (default: []) experimental=[] # If enabled, containers are allowed to join the pid namespace of the agent # when the env variable KATA_AGENT_PIDNS is set for a container. # Use this with caution and only when required, as this option allows the container # to access the agent process. It is recommended to enable this option # only in debug scenarios and with containers with lowered priveleges. #enable_agent_pidns = true ``` Config file `/usr/share/defaults/kata-containers/configuration.toml` not found --- # KSM throttler ## version Output of "` --version`": ``` /opt/kata/bin/kata-collect-data.sh: line 178: --version: command not found ``` ## systemd service # Image details ```yaml --- osbuilder: url: "https://github.com/kata-containers/osbuilder" version: "unknown" rootfs-creation-time: "2020-09-04T08:07:55.430857452+0000Z" description: "osbuilder rootfs" file-format-version: "0.0.2" architecture: "x86_64" base-distro: name: "bionic" version: "18.04" packages: default: - "systemd,iptables,init,chrony,kmod,fuse,bash,sysstat,htop" extra: - "bash" - "fuse" - "htop" - "sysstat" agent: url: "https://github.com/kata-containers/agent" name: "kata-agent" version: "1.12.0-alpha1-8c9bbadcd448c9a67690fbe11a860aaacc69813c" agent-is-init-daemon: "no" ``` --- # Initrd details No initrd --- # Logfiles ## Runtime logs No recent runtime problems found in system journal. ## Proxy logs No recent proxy problems found in system journal. ## Shim logs No recent shim problems found in system journal. ## Throttler logs No recent throttler problems found in system journal. --- # Container manager details Have `docker` ## Docker Output of "`docker version`": ``` Client: Docker Engine - Community Version: 18.09.7 API version: 1.39 Go version: go1.10.8 Git commit: 2d0083d Built: Thu Jun 27 17:54:15 2019 OS/Arch: linux/amd64 Experimental: false Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running? ``` Output of "`docker info`": ``` Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running? ``` Output of "`systemctl show docker`": ``` Restart=no NotifyAccess=none RestartUSec=100ms TimeoutStartUSec=1min 30s TimeoutStopUSec=1min 30s RuntimeMaxUSec=infinity WatchdogUSec=0 WatchdogTimestampMonotonic=0 RootDirectoryStartOnly=no RemainAfterExit=no GuessMainPID=yes MainPID=0 ControlPID=0 FileDescriptorStoreMax=0 NFileDescriptorStore=0 StatusErrno=0 Result=success UID=[not set] GID=[not set] NRestarts=0 ExecMainStartTimestampMonotonic=0 ExecMainExitTimestampMonotonic=0 ExecMainPID=0 ExecMainCode=0 ExecMainStatus=0 MemoryCurrent=[not set] CPUUsageNSec=[not set] TasksCurrent=[not set] IPIngressBytes=18446744073709551615 IPIngressPackets=18446744073709551615 IPEgressBytes=18446744073709551615 IPEgressPackets=18446744073709551615 Delegate=no CPUAccounting=no CPUWeight=[not set] StartupCPUWeight=[not set] CPUShares=[not set] StartupCPUShares=[not set] CPUQuotaPerSecUSec=infinity IOAccounting=no IOWeight=[not set] StartupIOWeight=[not set] BlockIOAccounting=no BlockIOWeight=[not set] StartupBlockIOWeight=[not set] MemoryAccounting=yes MemoryMin=0 MemoryLow=0 MemoryHigh=infinity MemoryMax=infinity MemorySwapMax=infinity MemoryLimit=infinity DevicePolicy=auto TasksAccounting=yes TasksMax=98303 IPAccounting=no UMask=0022 LimitCPU=infinity LimitCPUSoft=infinity LimitFSIZE=infinity LimitFSIZESoft=infinity LimitDATA=infinity LimitDATASoft=infinity LimitSTACK=infinity LimitSTACKSoft=8388608 LimitCORE=infinity LimitCORESoft=infinity LimitRSS=infinity LimitRSSSoft=infinity LimitNOFILE=1073741816 LimitNOFILESoft=1073741816 LimitAS=infinity LimitASSoft=infinity LimitNPROC=1546329 LimitNPROCSoft=1546329 LimitMEMLOCK=67108864 LimitMEMLOCKSoft=67108864 LimitLOCKS=infinity LimitLOCKSSoft=infinity LimitSIGPENDING=1546329 LimitSIGPENDINGSoft=1546329 LimitMSGQUEUE=819200 LimitMSGQUEUESoft=819200 LimitNICE=0 LimitNICESoft=0 LimitRTPRIO=0 LimitRTPRIOSoft=0 LimitRTTIME=infinity LimitRTTIMESoft=infinity OOMScoreAdjust=0 Nice=0 IOSchedulingClass=0 IOSchedulingPriority=0 CPUSchedulingPolicy=0 CPUSchedulingPriority=0 TimerSlackNSec=50000 CPUSchedulingResetOnFork=no NonBlocking=no StandardInput=null StandardInputData= StandardOutput=inherit StandardError=inherit TTYReset=no TTYVHangup=no TTYVTDisallocate=no SyslogPriority=30 SyslogLevelPrefix=yes SyslogLevel=6 SyslogFacility=3 LogLevelMax=-1 LogRateLimitIntervalUSec=0 LogRateLimitBurst=0 SecureBits=0 CapabilityBoundingSet=cap_chown cap_dac_override cap_dac_read_search cap_fowner cap_fsetid cap_kill cap_setgid cap_setuid cap_setpcap cap_linux_immutable cap_net_bind_service cap_net_broadcast cap_net_admin cap_net_raw cap_ipc_lock cap_ipc_owner cap_sys_module cap_sys_rawio cap_sys_chroot cap_sys_ptrace cap_sys_pacct cap_sys_admin cap_sys_boot cap_sys_nice cap_sys_resource cap_sys_time cap_sys_tty_config cap_mknod cap_lease cap_audit_write cap_audit_control cap_setfcap cap_mac_override cap_mac_admin cap_syslog cap_wake_alarm cap_block_suspend AmbientCapabilities= DynamicUser=no RemoveIPC=no MountFlags= PrivateTmp=no PrivateDevices=no ProtectKernelTunables=no ProtectKernelModules=no ProtectControlGroups=no PrivateNetwork=no PrivateUsers=no PrivateMounts=no ProtectHome=no ProtectSystem=no SameProcessGroup=no UtmpMode=init IgnoreSIGPIPE=yes NoNewPrivileges=no SystemCallErrorNumber=0 LockPersonality=no RuntimeDirectoryPreserve=no RuntimeDirectoryMode=0755 StateDirectoryMode=0755 CacheDirectoryMode=0755 LogsDirectoryMode=0755 ConfigurationDirectoryMode=0755 MemoryDenyWriteExecute=no RestrictRealtime=no RestrictNamespaces=no MountAPIVFS=no KeyringMode=private KillMode=control-group KillSignal=15 FinalKillSignal=9 SendSIGKILL=yes SendSIGHUP=no WatchdogSignal=6 Id=docker.service Names=docker.service ConsistsOf=docker.socket After=docker.socket TriggeredBy=docker.socket Description=docker.service LoadState=masked ActiveState=inactive SubState=dead FragmentPath=/dev/null UnitFileState=masked StateChangeTimestamp=Tue 2020-09-22 09:43:05 UTC StateChangeTimestampMonotonic=76906307 InactiveExitTimestampMonotonic=0 ActiveEnterTimestampMonotonic=0 ActiveExitTimestampMonotonic=0 InactiveEnterTimestampMonotonic=0 CanStart=no CanStop=yes CanReload=no CanIsolate=no StopWhenUnneeded=no RefuseManualStart=no RefuseManualStop=no AllowIsolate=no DefaultDependencies=yes OnFailureJobMode=replace IgnoreOnIsolate=no NeedDaemonReload=no JobTimeoutUSec=infinity JobRunningTimeoutUSec=infinity JobTimeoutAction=none ConditionResult=no AssertResult=no ConditionTimestampMonotonic=0 AssertTimestampMonotonic=0 LoadError=org.freedesktop.systemd1.UnitMasked "Unit docker.service is masked." Transient=no Perpetual=no StartLimitIntervalUSec=10s StartLimitBurst=5 StartLimitAction=none FailureAction=none FailureActionExitStatus=-1 SuccessAction=none SuccessActionExitStatus=-1 CollectMode=inactive ``` No `kubectl` No `crio` Have `containerd` ## containerd Output of "`containerd --version`": ``` containerd github.com/containerd/containerd v1.2.6 894b81a4b802e4eb2a91d1ce216b8817763c29fb ``` Output of "`systemctl show containerd`": ``` Type=simple Restart=always NotifyAccess=none RestartUSec=5s TimeoutStartUSec=1min 30s TimeoutStopUSec=1min 30s RuntimeMaxUSec=infinity WatchdogUSec=0 WatchdogTimestampMonotonic=0 RootDirectoryStartOnly=no RemainAfterExit=no GuessMainPID=yes MainPID=9224 ControlPID=0 FileDescriptorStoreMax=0 NFileDescriptorStore=0 StatusErrno=0 Result=success UID=[not set] GID=[not set] NRestarts=0 ExecMainStartTimestamp=Tue 2020-09-22 09:45:29 UTC ExecMainStartTimestampMonotonic=221133864 ExecMainExitTimestampMonotonic=0 ExecMainPID=9224 ExecMainCode=0 ExecMainStatus=0 ExecStartPre={ path=/sbin/modprobe ; argv[]=/sbin/modprobe overlay ; ignore_errors=no ; start_time=[Tue 2020-09-22 09:45:27 UTC] ; stop_time=[Tue 2020-09-22 09:45:27 UTC] ; pid=9156 ; code=exited ; status=0 } ExecStartPre={ path=/opt/bin/containerd-init.sh ; argv[]=/opt/bin/containerd-init.sh ; ignore_errors=no ; start_time=[Tue 2020-09-22 09:45:27 UTC] ; stop_time=[Tue 2020-09-22 09:45:29 UTC] ; pid=9157 ; code=exited ; status=0 } ExecStart={ path=/opt/containerd/bin/containerd ; argv[]=/opt/containerd/bin/containerd --log-level=debug --config=/etc/containerd/config.toml ; ignore_errors=no ; start_time=[Tue 2020-09-22 09:45:29 UTC] ; stop_time=[n/a] ; pid=9224 ; code=(null) ; status=0/0 } Slice=system.slice ControlGroup=/system.slice/containerd.service MemoryCurrent=828600320 CPUUsageNSec=[not set] TasksCurrent=173 IPIngressBytes=18446744073709551615 IPIngressPackets=18446744073709551615 IPEgressBytes=18446744073709551615 IPEgressPackets=18446744073709551615 Delegate=yes DelegateControllers=cpu cpuacct io blkio memory devices pids bpf-firewall bpf-devices CPUAccounting=no CPUWeight=[not set] StartupCPUWeight=[not set] CPUShares=[not set] StartupCPUShares=[not set] CPUQuotaPerSecUSec=infinity IOAccounting=no IOWeight=[not set] StartupIOWeight=[not set] BlockIOAccounting=no BlockIOWeight=[not set] StartupBlockIOWeight=[not set] MemoryAccounting=yes MemoryMin=0 MemoryLow=0 MemoryHigh=infinity MemoryMax=infinity MemorySwapMax=infinity MemoryLimit=infinity DevicePolicy=auto TasksAccounting=yes TasksMax=98303 IPAccounting=no UMask=0022 LimitCPU=infinity LimitCPUSoft=infinity LimitFSIZE=infinity LimitFSIZESoft=infinity LimitDATA=infinity LimitDATASoft=infinity LimitSTACK=infinity LimitSTACKSoft=8388608 LimitCORE=infinity LimitCORESoft=infinity LimitRSS=infinity LimitRSSSoft=infinity LimitNOFILE=1048576 LimitNOFILESoft=1048576 LimitAS=infinity LimitASSoft=infinity LimitNPROC=infinity LimitNPROCSoft=infinity LimitMEMLOCK=65536 LimitMEMLOCKSoft=65536 LimitLOCKS=infinity LimitLOCKSSoft=infinity LimitSIGPENDING=1546329 LimitSIGPENDINGSoft=1546329 LimitMSGQUEUE=819200 LimitMSGQUEUESoft=819200 LimitNICE=0 LimitNICESoft=0 LimitRTPRIO=0 LimitRTPRIOSoft=0 LimitRTTIME=infinity LimitRTTIMESoft=infinity OOMScoreAdjust=-999 Nice=0 IOSchedulingClass=0 IOSchedulingPriority=0 CPUSchedulingPolicy=0 CPUSchedulingPriority=0 TimerSlackNSec=50000 CPUSchedulingResetOnFork=no NonBlocking=no StandardInput=null StandardInputData= StandardOutput=journal StandardError=inherit TTYReset=no TTYVHangup=no TTYVTDisallocate=no SyslogPriority=30 SyslogLevelPrefix=yes SyslogLevel=6 SyslogFacility=3 LogLevelMax=-1 LogRateLimitIntervalUSec=0 LogRateLimitBurst=0 SecureBits=0 CapabilityBoundingSet=cap_chown cap_dac_override cap_dac_read_search cap_fowner cap_fsetid cap_kill cap_setgid cap_setuid cap_setpcap cap_linux_immutable cap_net_bind_service cap_net_broadcast cap_net_admin cap_net_raw cap_ipc_lock cap_ipc_owner cap_sys_module cap_sys_rawio cap_sys_chroot cap_sys_ptrace cap_sys_pacct cap_sys_admin cap_sys_boot cap_sys_nice cap_sys_resource cap_sys_time cap_sys_tty_config cap_mknod cap_lease cap_audit_write cap_audit_control cap_setfcap cap_mac_override cap_mac_admin cap_syslog cap_wake_alarm cap_block_suspend AmbientCapabilities= DynamicUser=no RemoveIPC=no MountFlags= PrivateTmp=no PrivateDevices=no ProtectKernelTunables=no ProtectKernelModules=no ProtectControlGroups=no PrivateNetwork=no PrivateUsers=no PrivateMounts=no ProtectHome=no ProtectSystem=no SameProcessGroup=no UtmpMode=init IgnoreSIGPIPE=yes NoNewPrivileges=no SystemCallErrorNumber=0 LockPersonality=no RuntimeDirectoryPreserve=no RuntimeDirectoryMode=0755 StateDirectoryMode=0755 CacheDirectoryMode=0755 LogsDirectoryMode=0755 ConfigurationDirectoryMode=0755 MemoryDenyWriteExecute=no RestrictRealtime=no RestrictNamespaces=no MountAPIVFS=no KeyringMode=private KillMode=process KillSignal=15 FinalKillSignal=9 SendSIGKILL=yes SendSIGHUP=no WatchdogSignal=6 Id=containerd.service Names=containerd.service Requires=sysinit.target system.slice WantedBy=multi-user.target Conflicts=shutdown.target Before=multi-user.target shutdown.target After=system.slice sysinit.target network.target containerd-devicemapper-init.service basic.target systemd-journald.socket Documentation=https://containerd.io Description=containerd container runtime LoadState=loaded ActiveState=active SubState=running FragmentPath=/etc/systemd/system/containerd.service UnitFileState=enabled UnitFilePreset=enabled StateChangeTimestamp=Tue 2020-09-22 09:45:29 UTC StateChangeTimestampMonotonic=221133914 InactiveExitTimestamp=Tue 2020-09-22 09:45:27 UTC InactiveExitTimestampMonotonic=218841259 ActiveEnterTimestamp=Tue 2020-09-22 09:45:29 UTC ActiveEnterTimestampMonotonic=221133914 ActiveExitTimestamp=Tue 2020-09-22 09:45:27 UTC ActiveExitTimestampMonotonic=218834087 InactiveEnterTimestamp=Tue 2020-09-22 09:45:27 UTC InactiveEnterTimestampMonotonic=218839662 CanStart=yes CanStop=yes CanReload=no CanIsolate=no StopWhenUnneeded=no RefuseManualStart=no RefuseManualStop=no AllowIsolate=no DefaultDependencies=yes OnFailureJobMode=replace IgnoreOnIsolate=no NeedDaemonReload=no JobTimeoutUSec=infinity JobRunningTimeoutUSec=infinity JobTimeoutAction=none ConditionResult=yes AssertResult=yes ConditionTimestamp=Tue 2020-09-22 09:45:27 UTC ConditionTimestampMonotonic=218840204 AssertTimestamp=Tue 2020-09-22 09:45:27 UTC AssertTimestampMonotonic=218840204 Transient=no Perpetual=no StartLimitIntervalUSec=10s StartLimitBurst=5 StartLimitAction=none FailureAction=none FailureActionExitStatus=-1 SuccessAction=none SuccessActionExitStatus=-1 InvocationID=13774031bc4c4933ad1b087341a62423 CollectMode=inactive ``` Output of "`cat /etc/containerd/config.toml`": ``` [grpc] address = "/run/containerd/containerd.sock" uid = 0 gid = 0 [plugins] [plugins.devmapper] pool_name = "containerd-thinpool" base_image_size = "64GB" [plugins.cri] max_container_log_line_size = 262144 [plugins.cri.containerd] snapshotter = "devmapper" [plugins.cri.containerd.runtimes] [plugins.cri.containerd.runtimes.kata] runtime_type = "io.containerd.kata.v2" privileged_without_host_devices = true pod_annotations = ["io.kata-containers.*"] [plugins.cri.containerd.runtimes.kata.options] ConfigPath = "/etc/kata-containers/configuration.toml" [plugins.cri.containerd.runtimes.runc] runtime_type = "io.containerd.runc.v2" privileged_without_host_devices = true [plugins.cri.containerd.runtimes.runc.options] BinaryName = "/run/torcx/unpack/runc/runc" [plugins.linux] shim = "/opt/containerd/bin/containerd-shim" runtime = "runc" [plugins.cri.registry] [plugins.cri.registry.mirrors] [plugins.cri.registry.mirrors."docker.io"] endpoint = ["http://localhost:5000"] ``` --- # Packages No `dpkg` No `rpm` ---

devimc commented 4 years ago

@awprice thanks for raising this, have you tried to reproduce it using QEMU 5.1? either way I'll bump QEMU to 5.1

awprice commented 4 years ago

@devimc I haven't had a chance to test it with 5.1 yet - I need to work out how to build QEMU first!

I'll post back here once I've tested it.

fidencio commented 3 years ago

This issue is being automatically closed as Kata Containers 1.x has now reached EOL (End of Life). This means it is no longer being maintained.

Important:

All users should switch to the latest Kata Containers 2.x release to ensure they are using a maintained release that contains the latest security fixes, performance improvements and new features.

This decision was discussed by the @kata-containers/architecture-committee and has been announced via the Kata Containers mailing list:

If you believe this issue still applies to Kata Containers 2.x, please open an issue against the Kata Containers 2.x repository, pointing to this one, providing details to allow us to migrate it.