search

kawal547 / open9x

Automatically exported from code.google.com/p/open9x
0 stars 0 forks source link

DBLKEYS combinations hard to perform on ersky9x board #111

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
When trying the usual +/- combo the inversion is done some times only, you have 
to be very precise on your key press.

With the stock board and er9x i was used to invert values this way with less 
difficulties.

Original issue reported on code.google.com by baptiste...@gadz.org on 24 Aug 2012 at 8:34

GoogleCodeExporter commented 8 years ago 
You have a too reactive board ;) I don't see how to fix it right now...

Original comment by bson...@gmail.com on 26 Aug 2012 at 8:50

GoogleCodeExporter commented 8 years ago 
;) no problem, that was just to point the thing.

Original comment by baptiste...@gadz.org on 27 Aug 2012 at 3:30

GoogleCodeExporter commented 8 years ago 
I notice the same behaviour with r1291 on stock board, while all was OK on my 
first testing of DBLKEYS feature on open9x (r1232 ?).

Original comment by f.ague...@wanadoo.fr on 27 Aug 2012 at 7:25

GoogleCodeExporter commented 8 years ago 
I don't know if there is a link but i'm unable to perform a [MENU long] to get 
a momentary switch instead of a normal switch on the function screen with 
recent r1291.

(By the way, i like a lot this feature, thanks for adding it)

Original comment by baptiste...@gadz.org on 27 Aug 2012 at 7:55

GoogleCodeExporter commented 8 years ago 
Do you have the AUTOSWITCH feature?

Original comment by bson...@gmail.com on 27 Aug 2012 at 8:01

GoogleCodeExporter commented 8 years ago 
Yes, I use AUTOSWITCH...

Original comment by f.ague...@wanadoo.fr on 27 Aug 2012 at 8:07

GoogleCodeExporter commented 8 years ago 
Sorry for the mess, i forgot to use AUTOSWITCH, now [MENU long] is OK for 
momentary switches.

Original comment by baptiste...@gadz.org on 27 Aug 2012 at 8:33

GoogleCodeExporter commented 8 years ago 
No problem, you will document it in french and english manual then ;)

Original comment by bson...@gmail.com on 27 Aug 2012 at 8:37

GoogleCodeExporter commented 8 years ago 
Sorry, Bertrand, I thought that the question about the AUTOSWITCH was also for 
me...

Original comment by f.ague...@wanadoo.fr on 27 Aug 2012 at 9:09

GoogleCodeExporter commented 8 years ago 
Just to be sure, I've tested (r1322) DBLKEYS with and without AUTOSWITCH, 
there's no change.

Original comment by f.ague...@wanadoo.fr on 30 Aug 2012 at 1:18

GoogleCodeExporter commented 8 years ago 
An -small and simple...- idea : when editing a value, is it possible to add a 
short delay (0.3s per example) when pressing one of the four buttons of the 
arrows pad, in order let the time to take in account a second button for 
DBLKEYS ?

Original comment by f.ague...@wanadoo.fr on 30 Aug 2012 at 1:30

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 4 Sep 2012 at 10:09

GoogleCodeExporter commented 8 years ago 
It seems that there is a problem on a sky9x board: a short left or right 
keypress is acting like a DBLKEYS (instead of increasing or decreasing the 
selected value you can just make it positive or negative)

I can make a small video if needed.

Original comment by baptiste...@gadz.org on 4 Sep 2012 at 10:19

GoogleCodeExporter commented 8 years ago 
I was already notified. I am fixing it right now ...

Original comment by bson...@gmail.com on 4 Sep 2012 at 10:22

GoogleCodeExporter commented 8 years ago 
Should be fixed now, would you check? Thanks!

Original comment by bson...@gmail.com on 4 Sep 2012 at 10:41

GoogleCodeExporter commented 8 years ago 
Thanks a lot, the problem is gone, but DBLKEYS are impossible to perform now 
(tried a lot whith a +/-)

Original comment by baptiste...@gadz.org on 4 Sep 2012 at 10:53

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 4 Sep 2012 at 12:11

GoogleCodeExporter commented 8 years ago 
Are you in EDIT mode? Before the +/- was possible even if !EDIT mode, but it 
seems to me an incoherency. Either all are accepted, or none, not only one...

Original comment by bson...@gmail.com on 4 Sep 2012 at 12:17

GoogleCodeExporter commented 8 years ago 
You're right, that was the reason:

If i go to the limit screen, select à subtrim and click [MENU] the number is 
blinking and DBLKEYS works like a charm (very easy to perform, nice !)

If i go to the mixer screen, select a mixer value, this value is highlighted 
but not blinking and DBLKEYS aren't available (that was the test i've done when 
making my previous comment)
If i go to the "Edit mixer" screen and try the same with the ratio value it 
works.

Original comment by baptiste...@gadz.org on 4 Sep 2012 at 12:28

GoogleCodeExporter commented 8 years ago 
Oh I think you are right, I took the bad option, I should enable them always, 
would you tell-me what you think of my next commit?

Original comment by bson...@gmail.com on 4 Sep 2012 at 12:33

GoogleCodeExporter commented 8 years ago 
It's ok on the first mixer screen now, thank you.

Original comment by baptiste...@gadz.org on 4 Sep 2012 at 12:55