search

kawal547 / open9x

Automatically exported from code.google.com/p/open9x
0 stars 0 forks source link

Switches not working with TelemetrEZ #198

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
Which board (stock / gruvin9x / sky9x) are you using?
stock 9x with '128 processor
What is your open9x FW version?
1947
What is your open9x EEPROM version?

What steps will reproduce the problem?
1. Use Companion9x(v1.17)
2. Setup profile for Open9x, check telemetrez box
3. Download and install firmware

What is the expected output? What do you see instead?
The telemetry link is working.  In the telemetry displays the TSSI and RSSI are 
updating.  Going to the switch test screen, the THR and AIL switches both show 
as constant on.  They should toggle with the actual switches.

Please provide any additional information below.
TelemetrEZ version v60

huginen reported that open9x r1855 was working correctly, both switches and 
data.

Original issue reported on code.google.com by gohs...@gmail.com on 13 Feb 2013 at 1:49

GoogleCodeExporter commented 8 years ago 
I wonder if it could be an error on the compilation server, relative to '128 
processor
Did you try with the stock version?

Original comment by bson...@gmail.com on 13 Feb 2013 at 2:45

GoogleCodeExporter commented 8 years ago 
I posted a message for huginen on the 9x forums.  I don't know whether his 
radio has the 64 or the 128 processor.  Here is a link to the 9x forum: 
http://9xforums.com/forum/viewtopic.php?f=23&t=994&p=39528#p39528

Original comment by gohs...@gmail.com on 13 Feb 2013 at 3:37

GoogleCodeExporter commented 8 years ago 
I have a stock m64 board and can confirm the same issue

Original comment by davereyn...@gmail.com on 13 Feb 2013 at 3:43

GoogleCodeExporter commented 8 years ago 
Issue on the compilation server

The syntax is:
make EXT=TELEMETREZ (it automatically enables FRSKY)

Original comment by bson...@gmail.com on 13 Feb 2013 at 5:00

GoogleCodeExporter commented 8 years ago 
Should be solved, before marking as fixed i ask for a check.
I do not have telemetrez board for checking

Original comment by romolo.m...@gmail.com on 13 Feb 2013 at 8:18

GoogleCodeExporter commented 8 years ago 
i can confirm that the issue is solved

//huginen

Original comment by hugi...@gmail.com on 13 Feb 2013 at 8:31

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 13 Feb 2013 at 8:32

GoogleCodeExporter commented 8 years ago 
i have exactly the same issue, and normaly the latest firmware 
companion 9X 1.17, and firmware 1947...

does someone know how to solve it?

Regards

Original comment by barre...@gmail.com on 14 Mar 2013 at 2:37

GoogleCodeExporter commented 8 years ago 
Did you choose the TelemetreZ option in c9x?

Original comment by bson...@gmail.com on 14 Mar 2013 at 3:36

GoogleCodeExporter commented 8 years ago 
I have the THR and AIL switch warning issue as well. It is a new Turnigy 9x 
with OpenTX r2940 flashed by Companion 9x (v 1.52, rev 2381), Smartieparts rev 
2.4 board and latest Telemetrez board. I ticked on Telemetrez in C9x, along 
with SP22 for my backlight.

Original comment by cjken...@gmail.com on 30 Apr 2014 at 2:22

GoogleCodeExporter commented 8 years ago 
Have you updated the telemetrez to it's latest version?  You can get it here -> 
https://code.google.com/p/9x-telemetrez/

Original comment by gohs...@gmail.com on 30 Apr 2014 at 12:15

GoogleCodeExporter commented 8 years ago 
My particular problem is now solved. I tried updating the telemetrez firmware 
several times and kept getting "connect the target" and no success. That clued 
me in (after reviewing the troubleshooting guide on the Smartieparts 9x 
programmer website) that my issue may be lack of good contact between the SP 
board and the 9x's main board. I tightened all the screws up and the switch 
error has gone away! Thanks to you folks on this board and Steve at SP!

Original comment by cjken...@gmail.com on 2 May 2014 at 3:14