Add TX BATT voltage as an event that could be spoken.

kawal547 / open9x

Automatically exported from code.google.com/p/open9x

0 stars 0 forks source link

Add TX BATT voltage as an event that could be spoken. #204

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago

Which board (stock / gruvin9x / sky9x) are you using?
stock board with atmega 128.
What is your open9x FW version?

Latest in SVN.

I was thinking it would be a good idea if the tx batt voltage was available to 
be spoken by voice.. I personally like to hear all the voltages when I'm 
flying. normally setr a switch that tells me this info. I mostly use the flight 
pack voltage and the tx voltage.
If I know that the voltage is quite low and I'm flying waiting for the alarm, I 
just can't concentrate. If I hear the voltage it gives me some piece of mind. 
it's just one more event on the list. :)

I wanted to list this as an enhancement but don't see the option..

Original issue reported on code.google.com by joaoalve...@googlemail.com on 19 Feb 2013 at 10:43

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 20 Feb 2013 at 6:20

Added labels: Type-Enhancement
Removed labels: Type-Defect

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 20 Feb 2013 at 10:17

Changed state: Started

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 20 Feb 2013 at 11:18

Changed state: Fixed

GoogleCodeExporter commented 8 years ago

Hi, It must be me but I can't find the option to make the tx speak the TX BATT 
voltage..
It's not in the same place as all the other telemetry events that can be spoken 
as it should?

Original comment by joaoalve...@googlemail.com on 20 Feb 2013 at 12:15

GoogleCodeExporter commented 8 years ago

Did you compile the latest SVN revision?

Original comment by bson...@gmail.com on 20 Feb 2013 at 12:40

GoogleCodeExporter commented 8 years ago

yes, for the atmega128

Original comment by joaoalve...@googlemail.com on 20 Feb 2013 at 12:55

GoogleCodeExporter commented 8 years ago

It is "Batt" just before "Tmr1" and "Tmr2"

Original comment by bson...@gmail.com on 20 Feb 2013 at 12:58

GoogleCodeExporter commented 8 years ago

Ah, i didn't see the Tmr1 and 2. Well I saw them but thought it was something 
like trim and didn't go before as it didn't look as an event to be spoken. But 
it was a good idea to have the timers there. very good :D
Thanks.. How do I choose enhancements whern I post an issue.. Can't find it..

Thanks. this is getting better and better..

Original comment by joaoalve...@googlemail.com on 20 Feb 2013 at 1:04

GoogleCodeExporter commented 8 years ago

Impossible, I have to do it

Original comment by bson...@gmail.com on 20 Feb 2013 at 1:17

GoogleCodeExporter commented 8 years ago

It was possible before I think.. at least in other projects :o

Original comment by joaoalve...@googlemail.com on 20 Feb 2013 at 2:02