Open overanged opened 1 year ago
Did you use this display before? Try Arduino example and check the results, maybe bad solder joints.
On Wed, 19 Oct 2022, 20:38 overanged, @.***> wrote:
Hi,
Building a SDrive-Max with the UNO R3 Mega328P with a 2.4 Inch TFT ILI9341 screen, I have an issue with the screens display.
Using Xloader v1.00, flashed the boards with V12 and the screen display is mirrored/flipped.
All touch functions work.
I have tried previous versions and V12C3 as availble on the github page.
If anyone has any suggestions, I would be grateful.
Thanks
[image: IMG_1438] https://user-images.githubusercontent.com/116200610/196776133-2c3de20b-4a86-48ee-a163-a364f025e874.jpeg [image: IMG_1439] https://user-images.githubusercontent.com/116200610/196776136-b8ad969b-6dd7-44f8-a036-33240cf5a072.jpeg [image: IMG_1440] https://user-images.githubusercontent.com/116200610/196776139-cb943a09-7493-42eb-966f-1fb3e6871f23.jpeg [image: IMG_1441] https://user-images.githubusercontent.com/116200610/196776141-7d7eac4f-1594-4a63-a65f-aa9d2ccbf0f9.jpeg
— Reply to this email directly, view it on GitHub https://github.com/kbr-net/sdrive-max/issues/56, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACMHVLZE754IWGQEPNPKCK3WEA5YTANCNFSM6AAAAAARJMYKWI . You are receiving this because you are subscribed to this thread.Message ID: @.***>
try this https://www.youtube.com/watch?v=EFAfcsYOriM
and try examples I don't have same library but follow your logic )) [image: image.png]
On Thu, Oct 20, 2022 at 8:48 PM overanged @.***> wrote:
First time using this display.
New to the Arduino scene, so any help pointing to an easy to load test file would be great.
Joints all look good.
— Reply to this email directly, view it on GitHub https://github.com/kbr-net/sdrive-max/issues/56#issuecomment-1285091849, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACMHVL3J3FKRZQ7G5LEKA6DWED2OLANCNFSM6AAAAAARJMYKWI . You are receiving this because you commented.Message ID: @.***>
I tried a basic display program and that one was also reversed, so I returned this item back to the seller, got a replacement.
The display was the correct, however after a while the display would go bright, only way to clear was to repower, another faulty display....
This time I am going to another seller, let hope this one works.....
Have you tried the other firmware variants instead of ILI9341? And have also a look at the TFT-ID, which is displayed on startup very shortly.
Hi,
Building a SDrive-Max with the UNO R3 Mega328P with a 2.4 Inch TFT ILI9341 screen, I have an issue with the screens display.
Using Xloader v1.00, flashed the boards with V12 and the screen display is mirrored/flipped.
All touch functions work.
I have tried previous versions and V12C3 as availble on the github page.
If anyone has any suggestions, I would be grateful.
Thanks