Closed dpslwk closed 7 months ago
Hello, this has been fixed by @joco-nz in main
https://github.com/kcjengr/qtpyvcp/commit/150b3194bc9cc2f00f56f8967315c19bb2af256d
https://github.com/kcjengr/qtpyvcp/commit/e9a9fad01d08bcd5459a8ae78ac11e4cb0858a1a
https://github.com/kcjengr/qtpyvcp/commit/558edfacd79596f4e019453fdbd5be618c25bac7
https://github.com/kcjengr/qtpyvcp/commit/d29fb0cb15a7c9531b64f271ffb1d5926a468c5b
https://github.com/kcjengr/qtpyvcp/commit/9da66c52d22eba465c172a3a5210dd48a4fb9bc5
https://github.com/kcjengr/qtpyvcp/commit/0dda2c146bb3ce61207dc57d53c1c382a77173ff
https://github.com/kcjengr/qtpyvcp/commit/717c8bdb916002a6130c505537edee1fd1d3f4f9
Thanks
VCPMainWindow@loadSplashGcode
is use at program startup to load an initial program file set via either[DISAPLY]OPEN_FILE
or as per_Info@getOpenFile
TOP_DIR, 'sim/example_gcode/qtpyvcp.ngc'
or'~/linuxcnc/nc_files/.qtpyvcp/qtpyvcp.ngc'
program_actions@load
bu default switch's the machine to AUTO, this is fine for machine with simple kinematic that start up inworld
mode but for more complex machine like a dual gantry (XYYZ) that starts up injoint
mode until homed this throws an error