kencormack
commented
4 years ago Hello, Ben - Eyeballing this, now. I appreciate your forwardng this to me. :)I'll read through it to identify any deviation from what I had anticipated the output should look like. I'm working in the blind, on the 4B stuff. As I scroll thorugh your output, I'm glad to see:1.) that I caught the USB-C power issue on your revision code c03111 board... 2.) that the EEPROM version data looks good...3.) the EEPROM update status shows no surprises... I've already addressed the issues with the PI MODEL 4B EEPROM CONFIG section - I realized after I'd posted 1.3.8 that I needed to validate that the other values I was looking for actually existed in the config before trying to output them. That'll be fixed in v1.3.9 of the script. I expected that "uname -a" would identify your 64-bit kernel in the OPERATING SYSTEM section, and I see the "aarch64" reference in that output. Good. Likewise, the config.txt dump shows your "arm_64bit=1" setting.
I'm glad to see the method I use to determine the MEMORY SPLIT is seeing your 4B's entire amount of memory. "vcgencmd get_mem arm" doesn't work as expected on systems with more than 1GB, so I had to do something different. Glad to see the active display driver was correctly identified. All the 4-B specific clock entries look as expected, as do the 4B voltages, and PMIC temperature. I'll want to look into the V4L2-CTL CODECS section, to see what it would take for a 4B to actually activate the H.265 codec. I was expecting to see it listed in that section. Looks like the script spotted a camera installed on your system. Is that accurate? (I don't have any cameras on my Pi's, so I was hoping that would work.) I was taken aback by no output in the I2C section, until I looked back at your config.txt and saw that you don't have I2C enabled. Glad to sse your "u-blox GNSS receiver" in the ACM COMMUNICATIONS DEVICES section. That was one of the items found by the lshw package you'd asked about. The script identified an outage of your bthelp service. That's good that it spotted that. Your London localization settings look good. I'm not sure what's going on with the HDMI section's "Invalid group 'CUSTOM'" error. Have you defined a custom group of parameters for your HDMI display?
Perhaps you'd be kind enough to run the following commands by hand, and forward me the output of each... tvservice -l tvservice -s -v 2
I'll have to do a better job accepting wiringpi as a package, on a 4B, by making sure if installed, it's version 2.52 Everything else looks just as expected. Again, thanks for sending your output along to me. I'll incorporate the few fixes identified here, and will forward an update to you, to test later, if you wouldn't mind.
Ken
On Sunday, April 19, 2020, 12:08:50 PM EDT, Ben <notifications@github.com> wrote: I chopped the bottom part out as it's long and you don't need that part Pi4 - 4 GB (original) 64bit kernel enabled All Raspbian updates Camera v1 and USB GNSS. Accessed over WiFi
RASPBERRY PI SYSTEM INFORMATION TOOL - v1.3.8
Written By Ken Cormack, unixken@yahoo.com With contributions from William Stearns, william.l.stearns@gmail.com Latest version on github - https://github.com/kencormack/system_info
Report Date and Time: Sun 19 Apr 16:53:53 BST 2020
=============================================================================== PRELIMINARY CHECKS
OS version check: OK dmesg ring buffer: OK running as user: pi sudo is available: OK
=============================================================================== DECODED SYSTEM REVISION NUMBER
Revision : c03111 PCB Revision : 1 Model Name : 4B Processor : BCM2711 Manufacturer : Sony UK Memory Size : 4096 MB Encoded Flag : revision is a bit field Warranty Void : no
This 4B contains a USB-C power design flaw. "Smart" USB-C cables will not power this Pi.
=============================================================================== CHECKING SOFTWARE DEPENDENCIES
Checking required software dependencies... found: alsa-utils found: bluez found: coreutils found: i2c-tools found: iproute2 found: libraspberrypi-bin found: lshw found: net-tools found: rpi-eeprom found: usbutils found: util-linux found: v4l-utils found: wireless-tools 13 out of 13 required packages are installed. All core inspections can be performed.
Checking supplemental software dependencies... found: dc found: ethtool found: python3-gpiozero found: wiringpi (v2.50) 4 out of 12 supplemental packages are installed. Some supplemental inspections can be performed.
=============================================================================== SYSTEM IDENTIFICATION
Hostname: raspberrypi4 Serial #: 100000007772603f
=============================================================================== MAC-ADDRESS(ES)
DC:A6:32:04:3E:E0 DC:A6:32:04:3E:E1
=============================================================================== MODEL AND FIRMWARE VERSION
Raspberry Pi 4 Model B Rev 1.1
Feb 12 2020 12:37:37 Copyright (c) 2012 Broadcom version c3c8dbdf147686fb0c3f32aece709d0653368810 (clean) (release) (start_x)
=============================================================================== SYSTEM DIAGRAM (***)
,--------------------------------.
| oooooooooooooooooooo J8 +======
| 1ooooooooooooooooooo PoE | Net
| Wi oo +======
| Fi Pi Model 4B V1.1 oo |
| ,----. +====
| |D| |SoC | |USB3
| |S| | | +====
| |I| ----' | | |C| +==== | |S| |USB2 | pwr |HD| |HD| |I||A| +==== -| |---|MI|---|MI|----|V|-------'
Revision : c03111 SoC : BCM2711 RAM : 4096Mb Storage : MicroSD USB ports : 4 (excluding power) Ethernet ports : 1 Wi-fi : True Bluetooth : True Camera ports (CSI) : 1 Display ports (DSI): 1
J8:
3V3 (1) (2) 5V
GPIO2 (3) (4) 5V
GPIO3 (5) (6) GND
GPIO4 (7) (8) GPIO14
GND (9) (10) GPIO15
GPIO17 (11) (12) GPIO18
GPIO27 (13) (14) GND
GPIO22 (15) (16) GPIO23
3V3 (17) (18) GPIO24
GPIO10 (19) (20) GND
GPIO9 (21) (22) GPIO25
GPIO11 (23) (24) GPIO8
GND (25) (26) GPIO7
GPIO0 (27) (28) GPIO1
GPIO5 (29) (30) GND
GPIO6 (31) (32) GPIO12
GPIO13 (33) (34) GND
GPIO19 (35) (36) GPIO16
GPIO26 (37) (38) GPIO20
GND (39) (40) GPIO21
For further information, please refer to https://pinout.xyz/
=============================================================================== CPU INFORMATION
Architecture: aarch64 Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 Vendor ID: ARM Model: 3 Model name: Cortex-A72 Stepping: r0p3 CPU max MHz: 1500.0000 CPU min MHz: 600.0000 BogoMIPS: 108.00 Flags: fp asimd evtstrm crc32 cpuid
=============================================================================== PI MODEL 4B EEPROM VERSION
Sep 10 2019 10:41:50 version f626c772b15ba1b7e0532a8d50a761b3ccbdf3bb (release) timestamp 1568112110
=============================================================================== PI MODEL 4B EEPROM UPDATE STATUS
BCM2711 detected BOOTLOADER: up-to-date CURRENT: Tue 10 Sep 10:41:50 UTC 2019 (1568112110) LATEST: Tue 10 Sep 10:41:50 UTC 2019 (1568112110) FW DIR: /lib/firmware/raspberrypi/bootloader/critical VL805: version unknown. Try sudo rpi-eeprom-update CURRENT: LATEST: 000137ad
=============================================================================== PI MODEL 4B EEPROM CONFIG
BOOT_UART=0 --If 1, then UART debug info is available on GPIO14 and 15. Configure the receiving debug terminal at 115200bps, 8 bits, no parity bits, 1 stop bit.
Default is 0
WAKE_ON_GPIO=1 --If 1. then "sudo halt" will run low power mode until GPIO3 or GLOBAL_EN is shorted to ground.
Default is 0 in the original bootloader (2019-05-10) Default is 1 in newer bootloaders
POWER_OFF_ON_HALT=0 --If 1, and WAKE_ON_GPIO=0, then switch off all PMIC outputs on halt. This is the lowest possible power state for halt, but may cause problems with some HATs because 5V will still be on. GLOBAL_EN must be shorted to ground in order to boot.
Default is 0
--The timeout in milliseconds for the entire DHCP sequence before failing the current iteration.
Default is 45000 Minimum is 5000
--Timeout in milliseconds before retrying DHCP DISCOVER or DHCP REQ.
Default is 4000 Minimum is 500
--Timeout in milliseconds for an individual file download via TFTP.
Default is 15000 Minimum is 5000
--Optional dotted decimal ip address for the TFTP server which overrides the server-ip from the DHCP request. This may be useful on home networks because tftpd-hpa can be used instead of dnsmasq where broadband router is the DHCP server.
Default ""
--In order to support unique TFTP boot directories for each Pi the bootloader prefixes the filenames with a device specific directory. If neither start4.elf nor start.elf are found in the prefixed directory then the prefix is cleared. On earlier models the serial number is used as the prefix, however, on the Pi 4 the MAC address is no longer generated from the serial number making it difficult to automatically create tftpboot directories on the server by inspecting DHCPDISCOVER packets. To support this the TFTP_PREFIX may be customized to either the MAC address, a fixed value, or the serial number.
0 - Default, use the serial number. 1 - Use the string specified by TFTP_PREFIX_STR 2 - Use the MAC address
--The BOOT_ORDER setting allows flexible configuration for the priority of different boot modes. It is represented as 32bit unsigned integer where each nibble represents a bootmode. The bootmodes are attempted in lowest significant nibble to highest significant nibble order.
E.g. 0x21 means try SD first followed by network boot then stop. whereas 0x2 would mean try network boot and then stop without trying to boot from the SD card.
Retry counters are reset when switching to the next boot mode.
BOOT ORDER FIELDS: 0x0 - NONE (stop with error pattern) 0x1 - SD CARD 0x2 - NETWORK
Default: 0x00000001 (with 3 SD boot retries to match the current bootloader behavior.
--Specify the maximum number of times that the bootloader will retry booting from the SD card.
Default is 0 1 means infinite retries
--Specify the maximum number of times that the bootloader will retry network boot.
Default is 0 1 means infinite retries
FREEZE_VERSION=0
--If 1 then the rpi-eeprom-update will skip automatic updates
on this board. The parameter is not processed by the EEPROM
bootloader or recovery.bin since there is no way in software
of fully write protecting the EEPROM. Custom EEPROM update
scripts must also check for this flag.
Default is 0
=============================================================================== OPERATING SYSTEM
Linux raspberrypi4 4.19.97-v8+ #1294 SMP PREEMPT Thu Jan 30 13:27:08 GMT 2020 aarch64 GNU/Linux Raspbian GNU/Linux 10 (buster)
up 3 days, 21 hours, 52 minutes
=============================================================================== CMDLINE.TXT
console=serial0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
=============================================================================== CONFIG.TXT SETTINGS
disable_overscan=1 dtparam=audio=on [pi4] dtoverlay=vc4-fkms-v3d max_framebuffers=2 [all] start_x=1 gpu_mem=128 arm_64bit=1
=============================================================================== MEMORY SPLIT
ARM: 3904 MB GPU: 128 MB
=============================================================================== ACTIVE DISPLAY DRIVER
"Fake" OpenGL Display Driver
=============================================================================== PROCESSOR SPEEDS
CPU: 1500 MHz CORE: 500 MHz
=============================================================================== CLOCK FREQUENCIES
Clocks available across all Pi models... arm: frequency(48)=1500345728 core: frequency(1)=500000992 h264: frequency(28)=0 isp: frequency(45)=0 v3d: frequency(46)=500000992 uart: frequency(22)=48001464 pwm: frequency(25)=0 emmc: frequency(50)=250000496 pixel: frequency(29)=75001464 vec: frequency(10)=0 hdmi: frequency(0)=0 dpi: frequency(4)=0
Additional Pi 4B-specific clocks... altscb: frequency(71)=275075680 cam0: frequency(41)=0 cam1: frequency(43)=0 ckl108: frequency(0)=0 clk27: frequency(72)=27000000 clk54: frequency(73)=54000000 debug0: frequency(68)=0 debug1: frequency(69)=0 dft: frequency(64)=0 dsi0: frequency(7)=0 dsi0esc: frequency(11)=0 dsi1: frequency(8)=0 dsi1esc: frequency(12)=0 emmc2: frequency(51)=100010744 genet125: frequency(31)=125006832 genet250: frequency(30)=250000496 gisb: frequency(70)=199995120 gpclk0: frequency(18)=0 gpclk1: frequency(19)=0 hevc: frequency(76)=500000992 m2mc: frequency(75)=150002928 otp: frequency(26)=13500000 pcm: frequency(23)=1977539 plla: frequency(100)=3000000000 pllb: frequency(100)=3000000000 pllc: frequency(100)=3000000000 plld: frequency(100)=3000000000 pllh: frequency(100)=3180815872 pulse: frequency(65)=92285 smi: frequency(24)=0 tectl: frequency(62)=0 testmux: frequency(66)=0 tsens: frequency(55)=3348632 usb: frequency(49)=27000000 wdog: frequency(63)=474609 xpt: frequency(67)=0
=============================================================================== VOLTAGES
Voltages available across all Pi models... core: volt=0.8375V sdram_c: volt=1.1000V sdram_i: volt=1.1000V sdram_p: volt=1.1000V
Additional Pi 4B-specific voltages... 2711: 1p1_0=0.8365V 1p1_1=0.0086V fv_0p85_0=0.0060V fv_0p85_1=0.5281V fv_1p8=1.7875V fv_3p3=3.2921V ain1: volt=0.0000V usb_pd: volt=0.0000V uncached: volt=0.8375V
=============================================================================== TEMPERATURE
Temperature available across all Pi models... Core Temp: 55.0°C (131.00°F) (***)
Additional Pi 4B-specific PMIC temperature... PMIC Temp: 51.4°C (124.52°F) (***)
=============================================================================== SCALING GOVERNOR
ondemand
=============================================================================== DECODED PROCESSOR THROTTLING STATUS
Throttle Status: 0x0
Undervolted: Currently: no Since Boot: no
Throttled: Currently: no Since Boot: no
Frequency Capped: Currently: no Since Boot: no
Softlimit: Currently: no Since Boot: no
=============================================================================== HARDWARE-ACCELERATED CODECS
AGIF: enabled FLAC: enabled H263: disabled H264: enabled MJPA: enabled MJPB: enabled MJPG: enabled MPG2: disabled MPG4: disabled MVC0: enabled PCM: enabled THRA: enabled VORB: enabled VP6: enabled VP8: enabled WMV9: disabled WVC1: disabled
Note 1: VP6, VP8, and MJPG are not handled by the hardware video decoder in the Broadcom BCM2835 processor, but by the VideoCore GPU. Enable these by running: sudo raspi-config -> Interfacing Options -> Camera -> Enable or by adding "start_x=1" to /boot/config.txt
Note 2: GPU hardware-accelerated codecs will be disabled if "gpu_mem=16". At least "gpu_mem=96" is required for the codecs to run correctly.
=============================================================================== V4L2-CTL CODECS
ioctl: VIDIOC_ENUM_FMT Type: Video Output Multiplanar
[0]: 'H264' (H.264, compressed)
[1]: 'MJPG' (Motion-JPEG, compressed)
[2]: 'VP80' (VP8, compressed)Note: The H.265 codec, new w/ the Pi 4B, isn't part of the videocore. It's an entirely new block on the chip, so the VC6 knows nothing about it. Therefore, vcgencmd (which talks to the VC6) also knows nothing about it. The v4l2-ctl command used here, however, should show the H.265 codec as enabled, on the Pi 4B.
=============================================================================== ADDITIONAL VIDEO4LINUX DEVICE 0
Driver Info: Driver name : bm2835 mmal Card type : mmal service 16.1 Bus info : platform:bcm2835-v4l2 Driver version : 4.19.97 Capabilities : 0x85200005 Video Capture Video Overlay Read/Write Streaming Extended Pix Format Device Capabilities Device Caps : 0x05200005 Video Capture Video Overlay Read/Write Streaming Extended Pix Format Priority: 2 Video input : 0 (Camera 0: ok) Format Video Capture: Width/Height : 1024/768 Pixel Format : 'JPEG' (JFIF JPEG) Field : None Bytes per Line : 0 Size Image : 786432 Colorspace : JPEG Transfer Function : Default (maps to sRGB) YCbCr/HSV Encoding: Default (maps to ITU-R 601) Quantization : Default (maps to Full Range) Flags : Format Video Overlay: Left/Top : 150/50 Width/Height: 1024/768 Field : None Chroma Key : 0x00000000 Global Alpha: 0xff Clip Count : 0 Clip Bitmap : Yes, 0 bits of 786432 are set Framebuffer Format: Capability : Extern Overlay Global Alpha Flags : Overlay Matches Capture/Output Size Width : 1024 Height : 768 Pixel Format : 'YU12' Streaming Parameters Video Capture: Capabilities : timeperframe Frames per second: 30.000 (30000/1000) Read buffers : 1
User Controls
brightness 0x00980900 (int) : min=0 max=100 step=1 default=50 value=50 flags=slider
contrast 0x00980901 (int) : min=-100 max=100 step=1 default=0 value=0 flags=slider
saturation 0x00980902 (int) : min=-100 max=100 step=1 default=0 value=0 flags=slider
red_balance 0x0098090e (int) : min=1 max=7999 step=1 default=1000 value=1000 flags=slider
blue_balance 0x0098090f (int) : min=1 max=7999 step=1 default=1000 value=1000 flags=slider
horizontal_flip 0x00980914 (bool) : default=0 value=0
vertical_flip 0x00980915 (bool) : default=0 value=0
power_line_frequency 0x00980918 (menu) : min=0 max=3 default=1 value=1
sharpness 0x0098091b (int) : min=-100 max=100 step=1 default=0 value=0 flags=slider
color_effects 0x0098091f (menu) : min=0 max=15 default=0 value=0
rotate 0x00980922 (int) : min=0 max=360 step=90 default=0 value=0 flags=modify-layout
color_effects_cbcr 0x0098092a (int) : min=0 max=65535 step=1 default=32896 value=32896Codec Controls
video_bitrate_mode 0x009909ce (menu) : min=0 max=1 default=0 value=0 flags=update
video_bitrate 0x009909cf (int) : min=25000 max=25000000 step=25000 default=10000000 value=10000000
repeat_sequence_header 0x009909e2 (bool) : default=0 value=0
h264_i_frame_period 0x00990a66 (int) : min=0 max=2147483647 step=1 default=60 value=60
h264_level 0x00990a67 (menu) : min=0 max=11 default=11 value=11
h264_profile 0x00990a6b (menu) : min=0 max=4 default=4 value=4Camera Controls
auto_exposure 0x009a0901 (menu) : min=0 max=3 default=0 value=0
exposure_time_absolute 0x009a0902 (int) : min=1 max=10000 step=1 default=1000 value=1000
exposure_dynamic_framerate 0x009a0903 (bool) : default=0 value=0
auto_exposure_bias 0x009a0913 (intmenu): min=0 max=24 default=12 value=12
white_balance_auto_preset 0x009a0914 (menu) : min=0 max=10 default=1 value=1
image_stabilization 0x009a0916 (bool) : default=0 value=0
iso_sensitivity 0x009a0917 (intmenu): min=0 max=4 default=0 value=0
iso_sensitivity_auto 0x009a0918 (menu) : min=0 max=1 default=1 value=1
exposure_metering_mode 0x009a0919 (menu) : min=0 max=2 default=0 value=0
scene_mode 0x009a091a (menu) : min=0 max=13 default=0 value=0JPEG Compression Controls
compression_quality 0x009d0903 (int) : min=1 max=100 step=1 default=30 value=30=============================================================================== CAMERA
supported=1 detected=1
=============================================================================== I2CDETECT
=============================================================================== USB AND OTHER DEVICE INFO
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 003: ID 1546:01a8 U-Blox AG [u-blox 8] Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus info Device Class Description
system Raspberry Pi 4 Model B Rev 1.1
bus Motherboardcpu@0 processor cpu cpu@1 processor cpu cpu@2 processor cpu cpu@3 processor cpu memory 3755MiB System memory pci@0000:00:00.0 bridge Broadcom Limited pci@0000:01:00.0 bus VL805 USB 3.0 Host Controller usb@1 usb1 bus xHCI Host Controller usb@1:1 bus USB2.0 Hub usb@1:1.3 communication u-blox GNSS receiver usb@2 usb2 bus xHCI Host Controller eth0 network Ethernet interface wlan0 network Wireless interface
=============================================================================== DISK CONFIGURATION
NAME FSTYPE SIZE MOUNTPOINT LABEL UUID PARTUUID MODEL
mmcblk0 29.7G
├─mmcblk0p1 vfat 256M /boot boot 6341-C9E5 ea7d04d6-01
└─mmcblk0p2 ext4 29.5G / rootfs 80571af6-21c9-48a0-9df5-cffb60cf79af ea7d04d6-02
Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 4.9G 23G 18% / /dev/mmcblk0p1 vfat 253M 53M 200M 21% /boot
=============================================================================== FSTAB FILE
proc /proc proc defaults 0 0 PARTUUID=ea7d04d6-01 /boot vfat defaults 0 2 PARTUUID=ea7d04d6-02 / ext4 defaults,noatime 0 1
=============================================================================== ALSA MODULES
0 snd_bcm2835
=============================================================================== ALSA SOUND HARDWARE
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA bcm2835 ALSA
=============================================================================== ALSA CARD-0 INFO
Simple mixer control 'PCM',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -10239 - 400 Mono: Playback -2000 [77%] [-20.00dB] [on]
=============================================================================== ALSA PLAYBACK AND CAPTURE DEVICES
List of PLAYBACK Hardware Devices card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 7/7 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1] Subdevices: 1/1 Subdevice #0: subdevice #0
List of CAPTURE Hardware Devices No capture device found
=============================================================================== ACM COMMUNICATION DEVICES
*-usb description: Communication device product: u-blox GNSS receiver vendor: u-blox AG - www.u-blox.com physical id: 3 bus info: usb@1:1.3 version: 3.01 capabilities: usb-1.10 configuration: driver=cdc_acm maxpower=100mA speed=12Mbit/s
=============================================================================== UARTS AND USB SERIAL PORTS
lrwxrwxrwx 1 root root 7 Apr 15 19:01 /dev/serial1 -> ttyAMA0 crw-rw---- 1 root dialout 166, 0 Apr 15 19:01 /dev/ttyACM0 crw-rw---- 1 root dialout 204, 64 Apr 15 19:01 /dev/ttyAMA0
SERIAL1... (/dev/ttyAMA0, PL011)
speed 3000000 baud; rows 0; columns 0; line = 15;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol =
ACM0... (/dev/ttyACM0, USB ACM device: 8])
speed 9600 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol =
=============================================================================== BLUETOOTH CONTROLLERS
Default BT Controller... Controller DC:A6:32:04:3E:E2 (public) Name: raspberrypi4 Alias: raspberrypi4 Class: 0x00000000 Powered: no Discoverable: no Pairable: yes UUID: Headset AG (00001112-0000-1000-8000-00805f9b34fb) UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb) UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb) UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb) UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb) UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb) UUID: Audio Source (0000110a-0000-1000-8000-00805f9b34fb) UUID: Handsfree Audio Gateway (0000111f-0000-1000-8000-00805f9b34fb) Modalias: usb:v1D6Bp0246d0532 Discovering: no
=============================================================================== BLUETOOTH DEVICES (paired w/ default controller)
=============================================================================== MEMORY AND SWAP
total used free shared buff/cache availableMem: 3.7Gi 186Mi 3.0Gi 39Mi 542Mi 3.4Gi Swap: 99Mi 0B 99Mi
Filename Type Size Used Priority /var/swap file 102396 0 -2
=============================================================================== MEMINFO
MemTotal: 3845824 kB MemFree: 3099736 kB MemAvailable: 3537772 kB Buffers: 87896 kB Cached: 415068 kB SwapCached: 0 kB Active: 270892 kB Inactive: 292712 kB Active(anon): 60976 kB Inactive(anon): 40172 kB Active(file): 209916 kB Inactive(file): 252540 kB Unevictable: 36 kB Mlocked: 36 kB SwapTotal: 102396 kB SwapFree: 102396 kB Dirty: 72 kB Writeback: 0 kB AnonPages: 60712 kB Mapped: 75788 kB Shmem: 40512 kB Slab: 101224 kB SReclaimable: 52588 kB SUnreclaim: 48636 kB KernelStack: 3296 kB PageTables: 3372 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2025308 kB Committed_AS: 723432 kB VmallocTotal: 263061440 kB VmallocUsed: 0 kB VmallocChunk: 0 kB Percpu: 1136 kB CmaTotal: 262144 kB CmaFree: 206676 kB
=============================================================================== IPC STATUS
RESOURCE DESCRIPTION LIMIT USED USE% MSGMNI Number of message queues 32000 0 0.00% MSGMAX Max size of message (bytes) 8192 - - MSGMNB Default max size of queue (bytes) 16384 - - SHMMNI Shared memory segments 4096 11 0.27% SHMALL Shared memory pages 18446744073692774399 226 0.00% SHMMAX Max size of shared memory segment (bytes) 18446744073692774399 - - SHMMIN Min size of shared memory segment (bytes) 1 - - SEMMNI Number of semaphore identifiers 32000 0 0.00% SEMMNS Total number of semaphores 1024000000 0 0.00% SEMMSL Max semaphores per semaphore set. 32000 - - SEMOPM Max number of operations per semop(2) 500 - - SEMVMX Semaphore max value 32767 - -
=============================================================================== SYSTEMD-ANALYZE CRITICAL-CHAIN
Startup finished in 1.081s (kernel) + 11.775s (userspace) = 12.856s graphical.target reached after 11.608s in userspace
The time after the unit is active or started is printed after the "@" character. The time the unit takes to start is printed after the "+" character.
graphical.target @11.608s └─multi-user.target @11.607s └─hciuart.service @4.878s +6.728s └─basic.target @4.744s └─sockets.target @4.743s └─triggerhappy.socket @4.743s └─sysinit.target @4.724s └─sys-fs-fuse-connections.mount @9.227s +20ms └─systemd-modules-load.service @967ms +81ms └─systemd-journald.socket @888ms └─system.slice @878ms └─-.slice @878ms
=============================================================================== SYSTEMD-ANALYZE BLAME
6.728s hciuart.service
2.393s dev-mmcblk0p2.device
1.391s man-db.service
1.094s udisks2.service
1.045s apt-daily.service
1.045s apt-daily-upgrade.service
876ms logrotate.service
743ms rpi-eeprom-update.service
602ms dphys-swapfile.service
566ms systemd-logind.service
561ms raspi-config.service
545ms avahi-daemon.service
458ms keyboard-setup.service
448ms systemd-fsck@dev-disk-by\x2dpartuuid-ea7d04d6\x2d01.service
428ms lightdm.service
422ms gpsdctl@ttyACM0.service
422ms systemd-udev-trigger.service
421ms plymouth-quit-wait.service
388ms wpa_supplicant.service
367ms systemd-timesyncd.service
354ms networking.service
347ms dhcpcd.service
320ms ssh.service
280ms polkit.service
276ms triggerhappy.service
260ms rng-tools.service
254ms gpsd.service
250ms plymouth-read-write.service
245ms systemd-journald.service
242ms rsyslog.service
227ms gldriver-test.service
206ms systemd-fsck-root.service
189ms user@1000.service
186ms alsa-restore.service
160ms systemd-udevd.service
154ms systemd-remount-fs.service
147ms systemd-tmpfiles-setup.service
119ms dev-mqueue.mount
112ms sys-kernel-debug.mount
110ms run-rpc_pipefs.mount
103ms fake-hwclock.service
98ms systemd-update-utmp.service
96ms kmod-static-nodes.service
92ms bluetooth.service
87ms systemd-sysctl.service
86ms systemd-journal-flush.service
81ms systemd-modules-load.service
75ms systemd-sysusers.service
69ms systemd-tmpfiles-setup-dev.service
65ms systemd-update-utmp-runlevel.service
60ms plymouth-start.service
59ms systemd-random-seed.service
58ms systemd-tmpfiles-clean.service
55ms boot.mount
46ms sys-kernel-config.mount
43ms systemd-rfkill.service
36ms console-setup.service
31ms user-runtime-dir@1000.service
27ms nfs-config.service
26ms ifupdown-pre.service
24ms systemd-user-sessions.service
22ms rc-local.service
20ms sys-fs-fuse-connections.mount=============================================================================== SYSTEMCTL STATUS
● raspberrypi4 State: degraded Jobs: 0 queued Failed: 1 units Since: Thu 1970-01-01 01:00:01 BST; 50 years 3 months ago CGroup: / ├─user.slice │ └─user-1000.slice │ ├─user@1000.service │ │ ├─gvfs-goa-volume-monitor.service │ │ │ └─672 /usr/lib/gvfs/gvfs-goa-volume-monitor │ │ ├─gvfs-daemon.service │ │ │ ├─593 /usr/lib/gvfs/gvfsd │ │ │ ├─598 /usr/lib/gvfs/gvfsd-fuse /run/user/1000/gvfs -f -o big_writes │ │ │ └─701 /usr/lib/gvfs/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0 │ │ ├─gvfs-udisks2-volume-monitor.service │ │ │ └─659 /usr/lib/gvfs/gvfs-udisks2-volume-monitor │ │ ├─init.scope │ │ │ ├─534 /lib/systemd/systemd --user │ │ │ └─537 (sd-pam) │ │ ├─gvfs-gphoto2-volume-monitor.service │ │ │ └─678 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor │ │ ├─dbus.service │ │ │ └─557 /usr/bin/dbus-daemon --session --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only │ │ ├─gvfs-mtp-volume-monitor.service │ │ │ └─663 /usr/lib/gvfs/gvfs-mtp-volume-monitor │ │ └─gvfs-afc-volume-monitor.service │ │ └─667 /usr/lib/gvfs/gvfs-afc-volume-monitor │ ├─session-c10.scope │ │ └─25604 pigpiod │ ├─session-c1.scope │ │ ├─526 lightdm --session-child 14 17 │ │ ├─548 /usr/bin/lxsession -s LXDE-pi -e LXDE │ │ ├─583 /usr/bin/ssh-agent x-session-manager │ │ ├─611 openbox --config-file /home/pi/.config/openbox/lxde-pi-rc.xml │ │ ├─613 lxpolkit │ │ ├─614 lxpanel --profile LXDE-pi │ │ ├─615 pcmanfm --desktop --profile LXDE-pi │ │ ├─621 /usr/bin/ssh-agent -s │ │ ├─623 /bin/sh /usr/lib/raspi-config/cmstart.sh │ │ ├─630 xcompmgr -aR │ │ └─655 /usr/lib/menu-cache/menu-cached /run/user/1000/menu-cached-:0 │ ├─session-c2.scope │ │ ├─513 /bin/login -f │ │ └─731 -bash │ └─session-c12.scope │ ├─27745 sshd: pi [priv] │ ├─27755 sshd: pi@pts/0 │ ├─27804 -bash │ ├─27978 /bin/bash ./system_info.v1.3.8.sh │ ├─28587 systemctl status │ └─28588 tee /dev/null ├─init.scope │ └─1 /sbin/init splash └─system.slice ├─gpsd.service │ └─406 /usr/sbin/gpsd ├─systemd-udevd.service │ └─141 /lib/systemd/systemd-udevd ├─rng-tools.service │ └─345 /usr/sbin/rngd -r /dev/hwrng ├─triggerhappy.service │ └─330 /usr/sbin/thd --triggers /etc/triggerhappy/triggers.d/ --socket /run/thd.socket --user nobody --deviceglob /dev/input/event* ├─cron.service │ └─344 /usr/sbin/cron -f ├─polkit.service │ └─459 /usr/lib/policykit-1/polkitd --no-debug ├─bluetooth.service │ └─750 /usr/lib/bluetooth/bluetoothd ├─wpa_supplicant.service │ └─368 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant ├─lightdm.service │ ├─458 /usr/sbin/lightdm │ └─512 /usr/lib/xorg/Xorg :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch ├─systemd-journald.service │ └─114 /lib/systemd/systemd-journald ├─ssh.service │ └─479 /usr/sbin/sshd -D ├─hciuart.service │ └─744 /usr/bin/hciattach /dev/serial1 bcm43xx 3000000 flow - ├─boinc-client.service │ └─331 /usr/bin/boinc ├─rsyslog.service │ └─356 /usr/sbin/rsyslogd -n -iNONE ├─alsa-state.service │ └─351 /usr/sbin/alsactl -E HOME=/run/alsa -s -n 19 -c rdaemon ├─dhcpcd.service │ ├─393 /sbin/dhcpcd -q -b │ └─482 wpa_supplicant -B -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0 -Dnl80211,wext ├─bluealsa.service │ └─751 /usr/bin/bluealsa ├─udisks2.service │ └─336 /usr/lib/udisks2/udisksd ├─dbus.service │ └─365 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only ├─systemd-timesyncd.service │ └─292 /lib/systemd/systemd-timesyncd ├─avahi-daemon.service │ ├─338 avahi-daemon: running [raspberrypi4.local] │ └─378 avahi-daemon: chroot helper └─systemd-logind.service └─332 /lib/systemd/systemd-logind
=============================================================================== SYSTEMCTL UNIT FAILURES
UNIT LOAD ACTIVE SUB DESCRIPTION
● bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper
LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed.
=============================================================================== SYSTEMCTL LIST-UNIT-FILES
UNIT FILE STATE
proc-sys-fs-binfmt_misc.automount static
-.mount generated
boot.mount generated
dev-hugepages.mount static
dev-mqueue.mount static
proc-fs-nfsd.mount static
proc-sys-fs-binfmt_misc.mount static
run-rpc_pipefs.mount static
sys-fs-fuse-connections.mount static
sys-kernel-config.mount static
sys-kernel-debug.mount static
systemd-ask-password-console.path static
systemd-ask-password-plymouth.path static
systemd-ask-password-wall.path static
session-c1.scope transient
session-c10.scope transient
session-c12.scope transient
session-c2.scope transient
alsa-restore.service static
alsa-state.service static
alsa-utils.service masked
apparmor.service enabled
apply_noobs_os_config.service disabled
apt-daily-upgrade.service static
apt-daily.service static
auth-rpcgss-module.service static
autologin@.service disabled
autovt@.service enabled
avahi-daemon.service enabled
bluealsa.service static
bluetooth.service enabled
boinc-client.service enabled
bootlogd.service masked
bootlogs.service masked
bootmisc.service masked
bthelper@.service static
checkfs.service masked
checkroot-bootclean.service masked
checkroot.service masked
clean-mount-point@.service static
console-getty.service disabled
console-setup.service enabled
container-getty@.service static
cron.service enabled
cryptdisks-early.service masked
cryptdisks.service masked
dbus-fi.w1.wpa_supplicant1.service enabled
dbus-org.bluez.service enabled
dbus-org.freedesktop.Avahi.service enabled
dbus-org.freedesktop.hostname1.service static
dbus-org.freedesktop.locale1.service static
dbus-org.freedesktop.login1.service static
dbus-org.freedesktop.timedate1.service static
dbus-org.freedesktop.timesync1.service enabled
dbus.service static
debug-shell.service disabled
dhcpcd.service enabled
dhcpcd5.service enabled
display-manager.service indirect
dphys-swapfile.service enabled
emergency.service static
fake-hwclock.service enabled
fstrim.service static
getty-static.service static
getty@.service enabled
gldriver-test.service enabled
gpsd.service disabled
gpsdctl@.service static
halt.service masked
hciuart.service enabled
hostname.service masked
hwclock.service masked
ifup@.service static
ifupdown-pre.service static
ifupdown-wait-online.service disabled
initrd-cleanup.service static
initrd-parse-etc.service static
initrd-switch-root.service static
initrd-udevadm-cleanup-db.service static
keyboard-setup.service enabled
killprocs.service masked
kmod-static-nodes.service static
kmod.service static
lightdm.service indirect
logrotate.service static
man-db.service static
module-init-tools.service static
motd.service masked
mountall-bootclean.service masked
mountall.service masked
mountdevsubfs.service masked
mountkernfs.service masked
mountnfs-bootclean.service masked
mountnfs.service masked
networking.service enabled
nfs-common.service masked
nfs-config.service static
nfs-idmapd.service static
nfs-utils.service static
nodered.service disabled
packagekit-offline-update.service static
packagekit.service static
paxctld.service disabled
pigpiod.service disabled
plymouth-halt.service static
plymouth-kexec.service static
plymouth-log.service static
plymouth-poweroff.service static
plymouth-quit-wait.service static
plymouth-quit.service static
plymouth-read-write.service static
plymouth-reboot.service static
plymouth-start.service static
plymouth-switch-root.service static
plymouth.service static
polkit.service static
portmap.service disabled
procps.service static
quotaon.service static
raspberrypi-net-mods.service enabled
raspi-config.service generated
rc-local.service enabled-runtime
rc.local.service enabled-runtime
rc.service masked
rcS.service masked
reboot.service masked
regenerate_ssh_host_keys.service disabled
rescue.service static
rmnologin.service masked
rng-tools.service generated
rpc-gssd.service static
rpc-statd-notify.service disabled
rpc-statd.service disabled
rpc-svcgssd.service static
rpcbind.service disabled
rpi-display-backlight.service enabled
rpi-eeprom-update.service enabled
rsync.service enabled
rsyslog.service enabled
screen-cleanup.service masked
sendsigs.service masked
serial-getty@.service disabled
single.service masked
ssh.service enabled
ssh@.service static
sshd.service enabled
sshswitch.service enabled
stop-bootlogd-single.service masked
stop-bootlogd.service masked
sudo.service masked
syslog.service enabled
system-update-cleanup.service static
systemd-ask-password-console.service static
systemd-ask-password-plymouth.service static
systemd-ask-password-wall.service static
systemd-backlight@.service static
systemd-binfmt.service static
systemd-bless-boot.service static
systemd-boot-check-no-failures.service disabled
systemd-exit.service static
systemd-fsck-root.service enabled-runtime
systemd-fsck@.service static
systemd-fsckd.service static
systemd-halt.service static
systemd-hibernate-resume@.service static
systemd-hibernate.service static
systemd-hostnamed.service static
systemd-hwdb-update.service static
systemd-hybrid-sleep.service static
systemd-initctl.service static
systemd-journal-flush.service static
systemd-journald.service static
systemd-kexec.service static
systemd-localed.service static
systemd-logind.service static
systemd-machine-id-commit.service static
systemd-modules-load.service static
systemd-networkd-wait-online.service disabled
systemd-networkd.service disabled
systemd-poweroff.service static
systemd-quotacheck.service static
systemd-random-seed.service static
systemd-reboot.service static
systemd-remount-fs.service static
systemd-resolved.service disabled
systemd-rfkill.service static
systemd-suspend-then-hibernate.service static
systemd-suspend.service static
systemd-sysctl.service static
systemd-sysusers.service static
systemd-time-wait-sync.service disabled
systemd-timedated.service static
systemd-timesyncd.service enabled
systemd-tmpfiles-clean.service static
systemd-tmpfiles-setup-dev.service static
systemd-tmpfiles-setup.service static
systemd-udev-settle.service static
systemd-udev-trigger.service static
systemd-udevd.service static
systemd-update-utmp-runlevel.service static
systemd-update-utmp.service static
systemd-user-sessions.service static
systemd-volatile-root.service static
triggerhappy.service enabled
udev.service static
udisks2.service enabled
umountfs.service masked
umountnfs.service masked
umountroot.service masked
urandom.service static
usb_modeswitch@.service static
user-runtime-dir@.service static
user@.service static
vncserver-virtuald.service disabled
vncserver-x11-serviced.service disabled
wpa_supplicant-nl80211@.service disabled
wpa_supplicant-wired@.service disabled
wpa_supplicant.service enabled
wpa_supplicant@.service disabled
x11-common.service masked
zram-setup@.service static
machine.slice static
user.slice static
avahi-daemon.socket enabled
dbus.socket static
gpsd.socket enabled
rpcbind.socket disabled
ssh.socket disabled
syslog.socket static
systemd-fsckd.socket static
systemd-initctl.socket static
systemd-journald-audit.socket static
systemd-journald-dev-log.socket static
systemd-journald.socket static
systemd-networkd.socket disabled
systemd-rfkill.socket static
systemd-udevd-control.socket static
systemd-udevd-kernel.socket static
triggerhappy.socket enabled
basic.target static
bluetooth.target static
boot-complete.target static
cryptsetup-pre.target static
cryptsetup.target static
ctrl-alt-del.target disabled
default.target indirect
emergency.target static
exit.target disabled
final.target static
getty-pre.target static
getty.target static
graphical.target indirect
halt.target disabled
hibernate.target static
hybrid-sleep.target static
initrd-fs.target static
initrd-root-device.target static
initrd-root-fs.target static
initrd-switch-root.target static
initrd.target static
kexec.target disabled
local-fs-pre.target static
local-fs.target static
multi-user.target static
network-online.target static
network-pre.target static
network.target static
nfs-client.target enabled
nss-lookup.target static
nss-user-lookup.target static
paths.target static
poweroff.target disabled
printer.target static
reboot.target disabled
remote-cryptsetup.target disabled
remote-fs-pre.target static
remote-fs.target enabled
rescue-ssh.target static
rescue.target static
rpcbind.target static
runlevel0.target disabled
runlevel1.target static
runlevel2.target static
runlevel3.target static
runlevel4.target static
runlevel5.target indirect
runlevel6.target disabled
shutdown.target static
sigpwr.target static
sleep.target static
slices.target static
smartcard.target static
sockets.target static
sound.target static
suspend-then-hibernate.target static
suspend.target static
swap.target static
sysinit.target static
system-update-pre.target static
system-update.target static
time-sync.target static
timers.target static
umount.target static
apt-daily-upgrade.timer enabled
apt-daily.timer enabled
fstrim.timer disabled
logrotate.timer enabled
man-db.timer enabled
systemd-tmpfiles-clean.timer static
309 unit files listed.
=============================================================================== RC.LOCAL
_IP=$(hostname -I) || true if [ "$_IP" ]; then printf "My IP address is %s\n" "$_IP" fi exit 0
=============================================================================== LOCALIZATION SETTINGS
Language : en_GB.UTF-8 KB Model : pc105 KB Layout: gb Char. Map: UTF-8 Timezone : Europe/London
=============================================================================== OFFICIAL 7" TOUCHSCREEN
not detected
=============================================================================== HDMI DISPLAY DATA
1 attached device(s), display ID's are : Display Number 2, type HDMI 0
DISPLAY NUMBER : 2 DISPLAY STATUS : state 0xa [HDMI CUSTOM RGB lim 16:9], 1920x1080 @ 60.00Hz, progressive EDID DEVICE ID : device_name=DEL-DELL_ST2210 SUPPORTED AUDIO: PCM supported: Max channels: 2, Max samplerate: 48kHz, Max samplesize 16 bits.
[E] Invalid group 'CUSTOM'
=============================================================================== CURRENT SCREEN RESOLUTION
HORIZONTAL : 1920 pixels VERTICAL : 1080 pixels COLOR DEPTH: 24 bits
=============================================================================== GPIO PIN STATUS (***)
Oops - unable to determine board type... model: 17
=============================================================================== RESOLV.CONF
domain lan nameserver 192.168.1.1 nameserver fe80::e2b9:e5ff:fea1:347e%wlan0
=============================================================================== HOSTS FILE
127.0.0.1 localhost ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters 127.0.1.1 raspberrypi4
=============================================================================== NETWORKS FILE
default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0
=============================================================================== TCPWRAPPERS: HOSTS.DENY
file is empty
=============================================================================== TCPWRAPPERS: HOSTS.ALLOW
file is empty
=============================================================================== ROUTE TABLE - IPV4
Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default dsldevice.lan 0.0.0.0 UG 303 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 303 0 0 wlan0
=============================================================================== ROUTE TABLE - IPV6
Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If localhost/128 [::] U 256 1 0 lo fe80::/64 [::] U 256 1 0 wlan0 [::]/0 [::] !n -1 1 0 lo localhost/128 [::] Un 0 5 0 lo fe80::49d3:8044:27c9:5915/128 [::] Un 0 6 0 wlan0 ff00::/8 [::] U 256 6 0 wlan0 [::]/0 [::] !n -1 1 0 lo
=============================================================================== NETWORK ADAPTORS
-network:0 description: Ethernet interface physical id: 1 logical name: eth0 serial: dc:a6:32:04:3e:e0 size: 10Mbit/s capacity: 1Gbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=bcmgenet driverversion=v2.0 duplex=half link=no multicast=yes port=MII speed=10Mbit/s -network:1 description: Wireless interface physical id: 2 logical name: wlan0 serial: dc:a6:32:04:3e:e1 capabilities: ethernet physical wireless configuration: broadcast=yes driver=brcmfmac driverversion=7.45.202 firmware=01-72f6ece2 ip=192.168.1.232 multicast=yes wireless=IEEE 802.11
=============================================================================== ETHTOOL (***)
Found eth0...
driver: bcmgenet version: v2.0 firmware-version: expansion-rom-version: bus-info: supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no
Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: 10Mb/s Duplex: Half Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: gs Wake-on: d SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000007 (7) drv probe link Link detected: no
===============================================================================
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.
I chopped the bottom part out as it's long and you don't need that part Pi4 - 4 GB (original) 64bit kernel enabled All Raspbian updates Camera v1 and USB GNSS. Accessed over WiFi