search

kevinGan / dslrdashboard

Automatically exported from code.google.com/p/dslrdashboard
0 stars 0 forks source link

Unable to update TPLink MR3040v2 with latest DD Server firmware #213

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1. Flash latest firmware image 
ddserver_openwrt-tl-mr3040-v2-squashfs-sysupgrade_0.12.bin
2.
3.

What is the expected output? What do you see instead?
Updated firmware expected.
Router returns "The CGI process did not produce any response"
No change to previous firmware version or settings.

What version of the product are you using? On what operating system?
Previous F/W version was 
openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin, which installed 
correctly over original TP-Link factory firmware and functioned successfully 
until the latest DSLRDashboard update.

Attempting to update to the latest downloaded version 
ddserver_openwrt-tl-mr3040-v2-squashfs-sysupgrade_0.12.bin downloaded from the 
DSLRDashboard site, under Win 8.1.

Please provide any additional information below.
The MR3040 appears to be receiving the uploaded image data for several minutes 
before halting with the above 'CGI process did not produce any response' error. 
There is no obvious change to the previous firmware and settings regardless of 
whether 'keep settings' is checked or unchecked. The update does not progress 
beyond this point either if left for an extended period of time or if the 
MR3040 is subsequently rebooted.

Please advise any other or alternative steps needed to update the firmware 
successfully. Many thanks.

Original issue reported on code.google.com by malcolmp...@gmail.com on 19 Feb 2014 at 4:35

GoogleCodeExporter commented 8 years ago 
UPDATE: Solved. The firmware upgrade flashed first time using an old Win XP 
machine with IE8 to do the upload, and now appears to be functioning correctly.

Further details of the symptoms are included in a thread at 
http://forum.lrtimelapse.com if anyone else has similar problems.

I hope it's OK to post the additional link here - mods please remove if 
inappropriate.

Original comment by malcolmp...@gmail.com on 20 Feb 2014 at 11:00

GoogleCodeExporter commented 8 years ago 
Sure it is. Glad it worked.

Original comment by hub...@gmail.com on 25 Feb 2014 at 10:14