Open kandrejevs opened 1 year ago
@kandrejevs I modified the files to work on an elegoo neptune 2 which appears to have the same style of extrusions. If you're interested, I can send/attach the .stl files of the modded parts along with some pictures?
I should mention, I changed the files for the single z with low profile motor. From you're picture, it looks like you're going for the dual z? I can make some tweaks. Just let me know.
@shuff57 This is an old issue, but i'm interested in your modified stl files that would work with new style of extrusions.
@jonathanysp I just upgraded my V2 Neo to the Z belt and I found it easier to just buy a new 2020 extrusion and cut/drill it. Took 10 minutes if you have the tools.
@jonathanysp I can't attach .stl or .3mf files so I'm adding google drive link for you get the files. I'll try to add some pictures in there too.
An issue I have encountered is that the new "neo" update to ender series uses different extrusions with 1 side flat. It is still fine in my opinion since support is held with 2 screws and motor mount with 3 if you rotate extrusion 180 degrees.