keyestudio
commented
3 months ago hi
------------------ 原始邮件 ------------------ 发件人: "keyestudio/KS5009-Keyestudio-Smart-Home-Kit-for-ESP32" @.>; 发送时间: 2024年8月22日(星期四) 上午6:42 @.>; @.***>; 主题: [keyestudio/KS5009-Keyestudio-Smart-Home-Kit-for-ESP32] Board identification in Board Manager in IDE (Issue #2)
I have the kit part-assembled and am trying to zero the servo on panel F (p14, step 7 of the instructions).
I followed the instruction to make the connections for the servo and connected the USB lead to my PC. Device Manager shows it as CH340. I followed the instructions for identifying the board. Mine says "ESP32 Plus" on the board and "ESPRESSIF ESP32-WROOM-32" on the chip.
The instructions say to use ESP32 Dev Module in the Board Manager. When I use this and compile window_servo.ino I get a long series of compile errors. I've tried other boards with "WROOM" in the titles but no success.
What do I need to do?
Thanks.
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: @.***>
I have the kit part-assembled and am trying to zero the servo on panel F (p14, step 7 of the instructions).
I followed the instruction to make the connections for the servo and connected the USB lead to my PC. Device Manager shows it as CH340. I followed the instructions for identifying the board. Mine says "ESP32 Plus" on the board and "ESPRESSIF ESP32-WROOM-32" on the chip.
The instructions say to use ESP32 Dev Module in the Board Manager. When I use this and compile window_servo.ino I get a long series of compile errors. I've tried other boards with "WROOM" in the titles but no success.
What do I need to do?
Thanks.