Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. Multi or Double DetectDetector feature permits entering Config Portal as requested.
Launch Portal Ok
Connect to wifi OK
Connect to Blynk server OK
loop() code run fine
but
if wifi loss the device enter some reconnect mode that not run main code, so, is too dependent of wifi.
may be i´m do something wrong
Expected behavior
A clear and concise description of what you expected to happen.
Actual behavior
A clear and concise description of what you expected to happen.
Debug and AT-command log (if applicable)
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Information
Please ensure to specify the following:
Arduino IDE version (e.g. 1.8.13) or Platform.io version
ESP8266,ESP32 or STM32 Core Version (e.g. ESP8266 core v2.7.4, ESP32 v1.0.5 or STM32 v1.9.0)
Contextual information (e.g. what you were trying to achieve)
Simplest possible steps to reproduce
Anything that might be relevant in your opinion, such as:
Operating system (Windows, Ubuntu, etc.) and the output of uname -a
Network configuration
Example
Arduino IDE version: 1.8.13
ESP32 Core Version 1.0.5
OS: Ubuntu 20.04 LTS
Linux xy-Inspiron-3593 5.4.0-66-generic #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
Context:
I encountered an endless loop while trying to connect to Local WiFi.
Steps to reproduce:
1. ...
2. ...
3. ...
4. ...
Describe the bug
Code stop when wifi loss
Steps to Reproduce
Launch Portal Ok Connect to wifi OK Connect to Blynk server OK loop() code run fine but if wifi loss the device enter some reconnect mode that not run main code, so, is too dependent of wifi. may be i´m do something wrong
Expected behavior
A clear and concise description of what you expected to happen.
Actual behavior
A clear and concise description of what you expected to happen.
Debug and AT-command log (if applicable)
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Information
Please ensure to specify the following:
ESP8266
,ESP32
orSTM32
Core Version (e.g. ESP8266 core v2.7.4, ESP32 v1.0.5 or STM32 v1.9.0)uname -a
Example
Additional context
Add any other context about the problem here.