kiddin9 / Kwrt

一分钟在线定制编译 X86/64, NanoPi R2S R4S R5S R6S, 斐讯 Phicomm N1 K2P, 树莓派 Raspberry Pi, 香橙派 Orange Pi, 红米AX6, 小米AX3600, 小米AX9000, 红米AX6S 小米AX3200, 红米AC2100, 华硕ASUS, 网件NETGEAR 等主流软硬路由
https://openwrt.ai
MIT License
7.75k stars 3.09k forks source link

我又来了 #110

Closed lx521603 closed 4 years ago

lx521603 commented 4 years ago

vsftpd openssh-sftp-server 这2个默认没有安装,之前的有。

Edge 主题下,改N次密码不生效,我就纳闷了,切换到bootstrap下解决。

kiddin9 commented 4 years ago

vsftpd openssh-sftp-server 这两个都是有的, Edge 主题改密码确实有点bug,需要改两次才会生效.后续会修复.

lx521603 commented 4 years ago

vsftpd openssh-sftp-server 这两个都是有的, Edge 主题改密码确实有点bug,需要改两次才会生效.后续会修复.

我pull昨天的,确实没有,因为刷新固件后,我都要用wincp,传adbyby的广告过滤规则(adhome过滤不掉广告,不然我就adhome还省事),wincp提示没有sftp协议,我查了下缺这2个,然后我去软件包那里的“可用”里面安装后,正常使用。

smartdns运行一段时间后,自己挂了,重启也不能运行,又要手动跑到启动项里面去点启动。

kiddin9 commented 4 years ago

默认确实没有安装,需要的话自己在软件包里安装下即可. 我都是用MobaXterm软件来上传,并不需要vsftpd openssh-sftp-server 我我的是SSR PLUS 从来没遇到过,smartdns挂掉的情况.

lx521603 commented 4 years ago

老大,问个问题,我在爱快上,设置DMZ,无论设到哪一个IP地址,都是生效的(我在爱快上绑定了阿里DDNS,输入域名就能知道成没成功),但你的固件不成功(设置虚拟机上的IP,爱快的IP都是成功的)。我同时做了端口映射,如果域名+端口号是成功的。

我真不知道哪里做错了。

我看了又看,跟其它固件的区别是,接口-硬件,里面,其它固件有 以太网适配器: "bond0",难道是因为这个的原因? 我不知道它是干嘛的

kiddin9 commented 4 years ago

这个我也不太清楚呢,

lx521603 commented 4 years ago

2020-07-20T05:49:42.5705865Z cc1: some warnings being treated as errors 2020-07-20T05:49:42.5776573Z make[5]: [/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/build_dir/target-x86_64_musl/linux-x86_64/rtl8821cu-5.8.1/os_dep/linux/os_intfs.o] Error 1 2020-07-20T05:49:42.5777033Z scripts/Makefile.build:265: recipe for target '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/build_dir/target-x86_64_musl/linux-x86_64/rtl8821cu-5.8.1/os_dep/linux/os_intfs.o' failed 2020-07-20T05:49:42.5781658Z Makefile:1707: recipe for target '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/build_dir/target-x86_64_musl/linux-x86_64/rtl8821cu-5.8.1' failed 2020-07-20T05:49:42.5782478Z make[4]: [/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/build_dir/target-x86_64_musl/linux-x86_64/rtl8821cu-5.8.1] Error 2 2020-07-20T05:49:42.5783050Z make[3]: [/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/build_dir/target-x86_64_musl/linux-x86_64/rtl8821cu-5.8.1/.built] Error 2 2020-07-20T05:49:42.5787073Z make[2]: [package/feeds/custom/rtl8821cu/compile] Error 2 2020-07-20T05:49:42.5787475Z make[4]: Leaving directory '/openwrt/build_dir/target-x86_64_musl/linux-x86_64/linux-5.4.52' 2020-07-20T05:49:42.5787837Z Makefile:74: recipe for target '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/build_dir/target-x86_64_musl/linux-x86_64/rtl8821cu-5.8.1/.built' failed 2020-07-20T05:49:42.5788166Z make[3]: Leaving directory '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/feeds/custom/luci/rtl8821cu' 2020-07-20T05:49:42.5788298Z time: package/feeds/custom/rtl8821cu/compile#1.63#0.41#2.05 2020-07-20T05:49:42.5790483Z package/Makefile:111: recipe for target 'package/feeds/custom/rtl8821cu/compile' failed 2020-07-20T05:49:42.5797236Z make[2]: Leaving directory '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt' 2020-07-20T05:49:42.5835627Z make[1]: [/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/staging_dir/target-x86_64_musl/stamp/.package_compile] Error 2 2020-07-20T05:49:42.5836159Z package/Makefile:107: recipe for target '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/staging_dir/target-x86_64_musl/stamp/.package_compile' failed 2020-07-20T05:49:42.5837038Z make: [world] Error 2 2020-07-20T05:49:42.5843548Z make[1]: Leaving directory '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt' 2020-07-20T05:49:42.5845292Z /home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/include/toplevel.mk:233: recipe for target 'world' failed 2020-07-20T05:49:42.5905044Z ##[error]Process completed with exit code 2. 2020-07-20T05:49:42.6077733Z Post job cleanup. 2020-07-20T05:49:43.6119260Z [command]/usr/bin/git version 2020-07-20T05:49:43.6182440Z git version 2.27.0 2020-07-20T05:49:43.6238376Z [command]/usr/bin/git config --local --name-only --get-regexp core.sshCommand 2020-07-20T05:49:43.6283019Z [command]/usr/bin/git submodule foreach --recursive git config --local --name-only --get-regexp 'core.sshCommand' && git config --local --unset-all 'core.sshCommand' || : 2020-07-20T05:49:43.6658642Z [command]/usr/bin/git config --local --name-only --get-regexp http.https\:\/\/github.com\/.extraheader 2020-07-20T05:49:43.6696997Z http.https://github.com/.extraheader 2020-07-20T05:49:43.6697614Z [command]/usr/bin/git config --local --unset-all http.https://github.com/.extraheader 2020-07-20T05:49:43.6729252Z [command]/usr/bin/git submodule foreach --recursive git config --local --name-only --get-regexp 'http.https\:\/\/github.com\/.extraheader' && git config --local --unset-all 'http.https://github.com/.extraheader' || : 2020-07-20T05:49:43.7014838Z Cleaning up orphan processes

rtl8821cu驱动编译不过去?我怎么去除它?云编译我找不到在哪里

kiddin9 commented 4 years ago

已修复

lx521603 commented 4 years ago

已修复

2020-07-20T15:52:08.5474726Z Configuring ppp-mod-pppoe. 2020-07-20T15:52:08.5474950Z Configuring coreutils-nohup. 2020-07-20T15:52:08.5475173Z Configuring luci-app-passwall. 2020-07-20T15:52:08.5475625Z check_data_file_clashes: Package luci-app-ipsec-vpnd wants to install file /home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/build_dir/target-x86_64_musl/root-x86/etc/init.d/ipsec 2020-07-20T15:52:08.5475795Z But that file is already provided by package strongswan 2020-07-20T15:52:08.5476077Z opkg_install_cmd: Cannot install package luci-i18n-ipsec-vpnd-zh-cn. 2020-07-20T15:52:08.5476495Z check_data_file_clashes: Package luci-app-ipsec-vpnd wants to install file /home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/build_dir/target-x86_64_musl/root-x86/etc/init.d/ipsec 2020-07-20T15:52:08.5476653Z But that file is already provided by package strongswan 2020-07-20T15:52:08.5476927Z opkg_install_cmd: Cannot install package luci-app-ipsec-vpnd. 2020-07-20T15:52:08.5477238Z satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-i18n-passwall-zh-cn: 2020-07-20T15:52:08.5477467Z chinadns-ng 2020-07-20T15:52:08.5477711Z opkg_install_cmd: Cannot install package luci-i18n-passwall-zh-cn. 2020-07-20T15:52:08.5478017Z satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-i18n-ssr-plus-zh-cn: 2020-07-20T15:52:08.5478249Z simple-obfs 2020-07-20T15:52:08.5478459Z v2ray-plugin 2020-07-20T15:52:08.5478909Z * opkg_install_cmd: Cannot install package luci-i18n-ssr-plus-zh-cn. 2020-07-20T15:52:08.5502368Z make[2]: [package/install] Error 255 2020-07-20T15:52:08.5502874Z package/Makefile:65: recipe for target 'package/install' failed 2020-07-20T15:52:08.5504201Z make[1]: [/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/staging_dir/target-x86_64_musl/stamp/.package_install] Error 2 2020-07-20T15:52:08.5504807Z make[2]: Leaving directory '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt' 2020-07-20T15:52:08.5505645Z package/Makefile:108: recipe for target '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/staging_dir/target-x86_64_musl/stamp/.package_install' failed 2020-07-20T15:52:08.5512854Z make[1]: Leaving directory '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt' 2020-07-20T15:52:08.5531227Z /home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/include/toplevel.mk:233: recipe for target 'world' failed 2020-07-20T15:52:08.5532780Z make: *** [world] Error 2 2020-07-20T15:52:08.5595099Z ##[error]Process completed with exit code 2. 2020-07-20T15:52:08.6164016Z Post job cleanup. 2020-07-20T15:52:09.0774241Z [command]/usr/bin/git version 2020-07-20T15:52:09.0839874Z git version 2.27.0 2020-07-20T15:52:09.0901807Z [command]/usr/bin/git config --local --name-only --get-regexp core.sshCommand 2020-07-20T15:52:09.0953191Z [command]/usr/bin/git submodule foreach --recursive git config --local --name-only --get-regexp 'core.sshCommand' && git config --local --unset-all 'core.sshCommand' || : 2020-07-20T15:52:09.1422729Z [command]/usr/bin/git config --local --name-only --get-regexp http.https\:\/\/github.com\/.extraheader 2020-07-20T15:52:09.1456834Z http.https://github.com/.extraheader 2020-07-20T15:52:09.1475990Z [command]/usr/bin/git config --local --unset-all http.https://github.com/.extraheader 2020-07-20T15:52:09.1519992Z [command]/usr/bin/git submodule foreach --recursive git config --local --name-only --get-regexp 'http.https\:\/\/github.com\/.extraheader' && git config --local --unset-all 'http.https://github.com/.extraheader' || : 2020-07-20T15:52:09.1882124Z Cleaning up orphan processes

这次是ipsec VPN 出问题?前几天都还可以,我去除看看。

lx521603 commented 4 years ago

2020-07-20T19:13:02.0522295Z Configuring iptables-mod-fullconenat. 2020-07-20T19:13:02.0522563Z Configuring luci-i18n-firewall-zh-cn. 2020-07-20T19:13:02.0522809Z Configuring ppp-mod-pppoe. 2020-07-20T19:13:02.0523053Z Configuring coreutils-nohup. 2020-07-20T19:13:02.0523302Z Configuring luci-app-passwall. 2020-07-20T19:13:02.0523483Z make[2]: [package/install] Error 255 2020-07-20T19:13:02.0523870Z make[1]: [/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/staging_dir/target-x86_64_musl/stamp/.package_install] Error 2 2020-07-20T19:13:02.0524192Z package/Makefile:65: recipe for target 'package/install' failed 2020-07-20T19:13:02.0524679Z make[2]: Leaving directory '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt' 2020-07-20T19:13:02.0525163Z package/Makefile:108: recipe for target '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/staging_dir/target-x86_64_musl/stamp/.package_install' failed 2020-07-20T19:13:02.0525525Z make[1]: Leaving directory '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt' 2020-07-20T19:13:02.0525907Z /home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/include/toplevel.mk:233: recipe for target 'world' failed 2020-07-20T19:13:02.0526642Z make: *** [world] Error 2 2020-07-20T19:13:02.0578598Z ##[error]Process completed with exit code 2. 2020-07-20T19:13:02.0835860Z Post job cleanup. 2020-07-20T19:13:02.5506380Z [command]/usr/bin/git version 2020-07-20T19:13:02.5564841Z git version 2.27.0 2020-07-20T19:13:02.5623587Z [command]/usr/bin/git config --local --name-only --get-regexp core.sshCommand 2020-07-20T19:13:02.5680249Z [command]/usr/bin/git submodule foreach --recursive git config --local --name-only --get-regexp 'core.sshCommand' && git config --local --unset-all 'core.sshCommand' || : 2020-07-20T19:13:02.6122033Z [command]/usr/bin/git config --local --name-only --get-regexp http.https\:\/\/github.com\/.extraheader 2020-07-20T19:13:02.6157094Z http.https://github.com/.extraheader 2020-07-20T19:13:02.6166844Z [command]/usr/bin/git config --local --unset-all http.https://github.com/.extraheader 2020-07-20T19:13:02.6199348Z [command]/usr/bin/git submodule foreach --recursive git config --local --name-only --get-regexp 'http.https\:\/\/github.com\/.extraheader' && git config --local --unset-all 'http.https://github.com/.extraheader' || : 2020-07-20T19:13:02.6518349Z Cleaning up orphan processes

然后

lx521603 commented 4 years ago

2020-07-21T14:05:58.0640218Z Configuring urngd. 2020-07-21T14:05:58.0640473Z Configuring iptables-mod-fullconenat. 2020-07-21T14:05:58.0681212Z Configuring luci-i18n-firewall-zh-cn. 2020-07-21T14:05:58.0681874Z Configuring ppp-mod-pppoe. 2020-07-21T14:05:58.0682481Z satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-i18n-ssr-plus-zh-cn: 2020-07-21T14:05:58.0682771Z simple-obfs 2020-07-21T14:05:58.0683948Z v2ray-plugin 2020-07-21T14:05:58.0684284Z opkg_install_cmd: Cannot install package luci-i18n-ssr-plus-zh-cn. 2020-07-21T14:05:58.0684474Z make[2]: [package/install] Error 255 2020-07-21T14:05:58.0684925Z make[1]: [/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/staging_dir/target-x86_64_musl/stamp/.package_install] Error 2 2020-07-21T14:05:58.0685281Z package/Makefile:65: recipe for target 'package/install' failed 2020-07-21T14:05:58.0685654Z make[2]: Leaving directory '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt' 2020-07-21T14:05:58.0686348Z package/Makefile:108: recipe for target '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/staging_dir/target-x86_64_musl/stamp/.package_install' failed 2020-07-21T14:05:58.0706109Z make[1]: Leaving directory '/home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt' 2020-07-21T14:05:58.0710098Z /home/runner/work/Actions-OpenWrt-Nginx/Actions-OpenWrt-Nginx/openwrt/include/toplevel.mk:233: recipe for target 'world' failed 2020-07-21T14:05:58.0712233Z make: *** [world] Error 2 2020-07-21T14:05:58.0792613Z ##[error]Process completed with exit code 2. 2020-07-21T14:05:58.0989684Z Post job cleanup. 2020-07-21T14:05:58.5635264Z [command]/usr/bin/git version 2020-07-21T14:05:58.5698699Z git version 2.27.0 2020-07-21T14:05:58.5752798Z [command]/usr/bin/git config --local --name-only --get-regexp core.sshCommand 2020-07-21T14:05:58.5809498Z [command]/usr/bin/git submodule foreach --recursive git config --local --name-only --get-regexp 'core.sshCommand' && git config --local --unset-all 'core.sshCommand' || : 2020-07-21T14:05:58.6277303Z [command]/usr/bin/git config --local --name-only --get-regexp http.https\:\/\/github.com\/.extraheader 2020-07-21T14:05:58.6321229Z http.https://github.com/.extraheader 2020-07-21T14:05:58.6331042Z [command]/usr/bin/git config --local --unset-all http.https://github.com/.extraheader 2020-07-21T14:05:58.6375866Z [command]/usr/bin/git submodule foreach --recursive git config --local --name-only --get-regexp 'http.https\:\/\/github.com\/.extraheader' && git config --local --unset-all 'http.https://github.com/.extraheader' || : 2020-07-21T14:05:58.6697401Z Cleaning up orphan processes

我去,我的总会出问题

lx521603 commented 4 years ago

之前说的,爱快的DMZ指向openwrt的IP地址没有作用,我对比了下其它固件, 然后在 /etc/config/network 里加上了2段就没问题了 option _orig_ifname 'eth0' option _orig_bridge 'true'

我的softether完全能使用了。 我不知道什么原理

kiddin9 commented 4 years ago

@lx521603 softethervpn不能用不是那2段的问题,是kernel版本与软件包里的不配置导致的,新固件已经修复了,你今天肯定有更新了固件,

lx521603 commented 4 years ago

QQ图片20200721233654 虽然我很想更新,但我一直没编译成功。现在正在使用的事17号,5天前编译成功的,运行了5天,没发现问题。 我现在是DMZ设到另外一个能运行softether vpn的固件上,那个固件只运行了这一个插件。 我就是对比那个固件的网络设置改了就正常了。

之前我不能验证是不是softethervpn能不能用,是dmz不起效啊,我用虚拟机里的ubuntu,ip,爱快的ip,unraid的ip,其它op的ip,都是秒生效。输入DDNS地址,马上就出现后台画面。 就是你的固件的不能访问。

这几天我就增加了这2段,它就没问题了。

lx521603 commented 4 years ago

但是,过了会,它又不行了。。。可能不是这2个代码的问题,重启了下,还是没用。

固件我去除了大部分插件,希望编译成功。

kiddin9 commented 4 years ago

@lx521603 嗯嗯,你如果是自编译的话那不影响,但也不是那两段的问题,那两段的作用只不过是 LUCI 操作时对之前网络设置的备份, image

lx521603 commented 4 years ago

好的,了解