search

kiibohd / controller

Kiibohd Controller
GNU General Public License v3.0
807 stars 270 forks source link

Ergodox Lock key issues, unlock from a layer working oddly #266

Closed grizzlybus closed 4 years ago

grizzlybus commented 6 years ago

I reliably am finding this problem:

With the ergodox infinity (both Massdrop 2016s), using the input.club latest configurator, the default "lock-1" and "lock-2" keys are acting oddly on two different ergodox infinity keyboards, for Mac and Windows 10:

Press the Lock-1 key locks in layer 1 correctly. Press the Lock-1 key to unlock does not work, UNLESS pressed 3 times.

Press the Lock-2 key locks in layer 2 correctly Press the Lock-2 key to unlock fails. No amount of pressing "Lock-2" unlocks this key. Requires unplugging master to fix.

This is with the left side master on both keyboards or right side master.

I did not have any such issues with earlier versions of the firmware, this started when I did a flash in December 2017.

grizzlybus commented 6 years ago

These problems do NOT present themselves in the LTS version FYI

bbaydar commented 6 years ago

Did you ever find a fix for this? Happens to me too.

nsuffield commented 6 years ago

I'm having the same problem with "LOCK2".

grizzlybus commented 6 years ago

Yeah, my solution was to switch from a cutting edge to a "stable" revision firmware... all my problems went away.

On Wed, Oct 3, 2018 at 10:21 AM Neil Suffield notifications@github.com wrote:

I'm having the same problem with "LOCK2".

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/kiibohd/controller/issues/266#issuecomment-426677775, or mute the thread https://github.com/notifications/unsubscribe-auth/AO6sxJx4L9G6CDgCYsUDDdNbElr5mp0mks5uhNYCgaJpZM4RYIMZ .

-- "Give a man fire- keep him warm for a day. Set a man on fire- keep him warm for the rest of his life." - Anonymous

nsuffield commented 6 years ago

Sorry to be a bit of a dunce ... I'm just using the downloadable configurator from https://input.club/configurator-setup/. Where did you get the stable firmware?

grizzlybus commented 6 years ago

Assuming you're using https://input.club/configurator-ergodox/ to create your configuration, there is an option that by default is "latest", but for me... "lts" works alot better:

[image: image.png]

On Wed, Oct 3, 2018 at 10:50 AM Neil Suffield notifications@github.com wrote:

Sorry to be a bit of a dunce ... I'm just using the downloadable configurator from https://input.club/configurator-setup/. Where did you get the stable firmware?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/kiibohd/controller/issues/266#issuecomment-426689345, or mute the thread https://github.com/notifications/unsubscribe-auth/AO6sxBegBYgY-ChCjXsUvpXrdf0lbJY6ks5uhNzZgaJpZM4RYIMZ .

-- "Give a man fire- keep him warm for a day. Set a man on fire- keep him warm for the rest of his life." - Anonymous

nsuffield commented 6 years ago

Actually no, I was using the downloadable app (Kiibohd Configurator) but I have another look at LTS on the online configuration tool. Actually ... I'm also tempted to have a look at QMK.

grizzlybus commented 5 years ago

I found using a stable version fixed this for me- I’ll check the version when I can...

On Tue, Sep 24, 2019 at 2:13 PM Dave notifications@github.com wrote:

I also have the same problem, I'm using the Kiibohd Configurator app v1.0.2.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/kiibohd/controller/issues/266?email_source=notifications&email_token=ADXKZRG6DDBVDQRBO5ZUHNLQLJRHNA5CNFSM4ELAQMM2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7PPYHI#issuecomment-534707229, or mute the thread https://github.com/notifications/unsubscribe-auth/ADXKZREKUTKQEFITSPUKCL3QLJRHNANCNFSM4ELAQMMQ .

-- "Give a man fire- keep him warm for a day. Set a man on fire- keep him warm for the rest of his life." - Anonymous

haata commented 4 years ago

Please take a look at the latest configurator firmware. I have fixed a bunch of issues.

grizzlybus commented 4 years ago

@haata - I appreciate you fixing the firmware! I'm about 10 minutes in, but v1220 (I think?) was a complete fix! So far so good, I'll report if I see any issues, but the keyboard is typing atleast as well as my 2018 web configurator firmware