search

kiibohd / controller

Kiibohd Controller
GNU General Public License v3.0
807 stars 270 forks source link

Dead key after switch swap #362

Open rynodigital opened 5 years ago

rynodigital commented 5 years ago

I'm sorry if this isn't the right place to post about this, but I've recently tried swapping out switches on my Kira and my 6 key on row 2 stopped working. The LED functions completely fine but the key press itself does not register anymore.

Is there anything I can do to fix this without having to open up the board? kira_json.txt

haata commented 5 years ago

If the 6 key is the key you swapped, it could possibly be that one of the switch pins are bent. You'll need to remove it and re-insert the switch.

Another possibility is that the pcb was damaged while inserting the switch (sometimes a bent pin, or a switch pin with solder on it can push out the hotswap socket).

It's a bit easier to tell with a picture of the pcb and underside of the switch (just remove the switch).

rynodigital commented 5 years ago

I saw someone had a similar issue on Reddit, and it turned out to be that the hot swap circut came loose. I'm hoping that's the problem!