Calibration does nothing

[ktig1]

Calibration process is not working at all. App will hang on the speed to 22 mph screen forever.

Steps to reproduce the behavior:

1. Go to any screen with Calibration
2. Click on Calibrate
3. Screen tells user to peddle to 22 miles per hour. Error: No mph displayed and screen stays on this step forever. Also, navigating off the screen will cause the app to move forward to the stop pedalling preparing data screen, and still no data is displayed.

Expected behavior Screenshot display mile per hour information. It should progress to the stop pedalling preparing data screen naturally without needing intervention.

Screenshots

Smartphone (please complete the following information):

• Device: Samsung S20FE
• OS: android 10
• Kinetic Fit Version : 2.5.1.2 (243)

Trainer (please complete the following information):

• Trainer: road machine smart control 1
• Firmware Version: 1266

Additional context Add any other context about the problem here.

[ktig1]

I entered calibration through the sensor screen. It is not showing any sort of mph however skipping off the kinetic app and going back into it progress to the next step at which point the rest of it proceeded normally I think? Hard to tell without any of the other sensors displaying target miles per hour cadence etc…