Closed vincegre closed 2 years ago
Did you change to the tbeam board in the IDE?
Did you change to the tbeam board in the IDE?
yep I reinstalled a completely clean arduino environment as had some library confilcts in past so reinstalled in it ESP32 board and selected TBeam board for sure and also the proper usb port ;)
I have the same problem
@elpidoforo if by #39, you are selecting the tbeam board on the IDE with a board other than a tbeam connected, then you aren't going to have a good time.
I see the same behaviour using :
board=t-beam
I'll see if I can build it, but at the moment I don't have time. If anyone can investigate, that would be helpful.
Thanks i will try to see how i will do it also wanted to ask you need special programing board for this device correct ? On Thu, 14 Oct 2021 at 5:05 PM, Kyle Gabriel @.***> wrote:
I'll see if I can build it, but at the moment I don't have time. If anyone can investigate, that would be helpful.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/kizniche/ttgo-tbeam-ttn-tracker/issues/38#issuecomment-943391057, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCAHVLS3UZE3GFP4YTQFILUG3PSDANCNFSM5FWQL3XA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.
special programing board for this device correct ?
confused by your question there !!! just an USB B cable to connect the TBeam board at computer you want to use to flash it ! It's based on ESP32 and it includes UART/USB converter on board ;)
I am using a t-motion
On Thu, 14 Oct 2021 at 7:27 PM, Vincèn @.***> wrote:
special programing board for this device correct ?
confused by your question there !!! just an USB B cable to connect the TBeam board at computer you want to use to flash it ! It's based on ESP32 and it includes UART/USB converter on board ;)
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/kizniche/ttgo-tbeam-ttn-tracker/issues/38#issuecomment-943519825, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCAHVKHARRG7TSW6EST6F3UG4AHRANCNFSM5FWQL3XA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.
I am using a t-motion
oki so your question is completely irrelevant as we are speaking here about T-beam that is ESP32 based, T-motion is completely different as it's based on STM32 so you should look for a program designed for such platform !
I'll see if I can build it, but at the moment I don't have time. If anyone can investigate, that would be helpful.
Hi kizniche, I found that using Espressif ESP32 previous v1.0.6 instead the latest v2.0.0, the build completed succesfully. So for my PoV (t-beam board) , actually the rollback is the shortest solution.
Hi kizniche, I found that using Espressif ESP32 previous v1.0.6 instead the latest v2.0.0, the build completed succesfully.
:+1: @davcx : works also here by downgrading ESP32 libs ;) not tested yet on device !
All working for me now here and have been able to start mapping coverage of my TTN gw ;) Thanks for help and for the code :+1: Side note: I changed in code SF10 to SF7 as it's more appropriate for tracking devices ;)
Hi
I added ESP32 platform in my Arduino IDE, added zip of each lib listed, then made the edit in the two files but when I compile it I get that error:
Not sure what is problem there ? :(
Thanks
Vincèn