Below are the security system settings I used to get everything working:
Recommended Panel configuration settings:
- Protocol: ASCII
- Speed: 38400 Baud (OR WHICHEVER YOU CHOOSE)
- Enabled Transition Messages:
* Interface Configuration Message
* Zone Status Message
* Partition Status Message
* System Status Message
* Log Event Message
* Keypad Message Received (OPTIONAL)
* X-10 Message Received (OPTIONAL)
- Enabled Commands:
* Interface Configuration Request
* Zone Name Request
* Zone Status Request
* Zones Snapshot Request
* Partition Status Request
* Partitions Snapshot Request
* Send X-10 Message (OPTIONAL)
* Log Event Request
* Send Keypad Text Message (OPTIONAL)
* System Status Request
* Program Data Request (OPTIONAL)
* Program Data Command (OPTIONAL)
* Set Clock / Calendar Command
* Primary Keypad Function with PIN (OPTIONAL)
* Secondary Keypad Function (OPTIONAL)
* Zone Bypass Toggle (OPTIONAL)
To autostart the nx584_server on boot, as user pi, I edited /etc/rc.local to include the following line before exit 0: sudo su - pi -c '/usr/local/bin/nx584_server --serial /dev/ttyUSB1 --baud 38400' &
Below are the security system settings I used to get everything working:
Recommended Panel configuration settings:
To autostart the nx584_server on boot, as user pi, I edited /etc/rc.local to include the following line before exit 0: sudo su - pi -c '/usr/local/bin/nx584_server --serial /dev/ttyUSB1 --baud 38400' &