search

klack / marlin

GNU General Public License v3.0
18 stars 6 forks source link

[BUG] (bug summary) Y axis does not home #147

Closed enishi1357 closed 2 years ago

enishi1357 commented 2 years ago

Did you test the latest bugfix-2.0.x code?

Yes, and the problem still exists.

Bug Description

Y axis does not home. It moves a little bit down every time it home.

Bug Timeline

No response

Expected behavior

I expect y-axis to move up to the max y axis position until it is detected by the y limit switch.

Actual behavior

y-axis Moves a little bit down.

Steps to Reproduce

  1. Use brand new TL-D3 Pro that has the bmg extruder as stock and the TMC2209 drivers.
  2. Use unedited compiled D3P_2209_Titan_BLTouch firmware
  3. Install working Bltouch correctly
  4. Use octoprint on a raspberry pi that's been used correctly on other machine .
  5. On web interface, Hit home for both x and y axis.

Version of Marlin Firmware

D3P_2209_Titan_BLTouch

Printer model

TL-D3 Pro

Electronics

Bltouch

Add-ons

No response

Bed Leveling

ABL Bilinear mesh

Your Slicer

No response

Host Software

OctoPrint

Additional information & file uploads

No response

enishi1357 commented 2 years ago

nvm I enabled invert y axis and now it works again.

enishi1357 commented 2 years ago

nvm the nvm. That didn't work.

enishi1357 commented 2 years ago

ok I had to enable y min not y max

klack commented 2 years ago

Hi, make sure you are using the 2.0.9.2 branch. This happens when you chose the incorrect Y endstop.