Daily Consumption

[tobenski]

Hi There,

I was trying to create a Daily consumption sensor, and i believe the modbus adress is 526 but it seams the messurment is of by quite a bit. (a least compared to the Solarman Logger interface)

My sensor code is this:

 - platform: modbus_controller #Daily Consumption
    modbus_controller_id: ${modbus_controller_id}
    skip_updates: 10
    name: ${device_type}-Daily Consumption
    id: ${device_type}_Daily_consumption
    register_type: holding
    address: 526
    unit_of_measurement: "kWh"
    state_class: "total_increasing"
    device_class: energy
    accuracy_decimals: 2
    value_type: U_WORD
    filters:
      - multiply: 0.1

Have you tried getting this sensor to work?

[klatremis]

I just use to the total, and let home assistant tell me how high the daily was. When using a daily sensor, its then the inverter that decide when the time reach 00. And not home assistant. Deye inverters tent to drift in clock over time. 5-10min/month have i seen. Therefor the daily is less accurate than a total and let HA controll the daily instead.

Without trying, i would just make it like i did for 527 How much is it off?

[tobenski]

Hi again, I actually made an utility sensor for the daily production bassed on the "total_consumption". It is showing the same messurement as the "Daily_consumption"

but both numbers ar eof by quite a bit.

Solarman: ESP 15.1 11.7 17.1 14.5 14.8 11.6

This is my (small) data sample. as you can see its off every day.

[klatremis]

What does the energy dashboard in HA say?

If the solarman use a different timezone, it will be different.