Clock problem

[tibo888]

Hello, The clock does not show the correct time. on the other hand mqtt is correct

Configuration clock

• Use fixed offset to UTC time -> "epochTimeFormatted":"2020-10-04 07:31:47" CORRECT
• Get time zone via internet -> "epochTimeFormatted":"2020-10-04 07:41:38" CORRECT

But clock time from the thermostat -> 23H02 NOT CORRECT

Ps: Guys, you doing a great job

[kibermanis]

@tibo888 please check you setup. With firmware v1.18 works fine.

[klausahrenberg]

Hi, I checked it at my model (BHT-002-GBLW) and its working fine with 'timezone via internet' and/or 'fixed offset'. I need more information. Which firmware version (v1.18)? Which model? Did you received messages like 'unknown MCU command' in MQTT?

[UlrichMai]

@tibo888, your picture is showing a red center touch button. Is that really red or did the camera just get the colors wrong?

[tibo888]

Hello everyone, @kibermanis i check the setup. i install the firmware v1.18 yesterday (previsouly 1.11) and the same setup. the problem is still there. @klausahrenberg, this is the information Model BHT-002-GBLW No MCU error @UlrichMai the center touch button is orange

thanks for help

[tibo888]

Hello I found something interesting I have 2 thermostats that are working properly and others that are not

WORK

DONT

[1300371]

Hello, I'm using the zigbee version BHT-002-GCLZ with zigbee2mqtt. I'm facing the same issue. Did you find any workaround ? I also ask my question here: https://github.com/Koenkk/zigbee2mqtt/issues/4185#issuecomment-724245233

[Gulpman]

I do have the same issue: The clock of my thermostat ME81(A)H / firmware 1.20l is not set correctly via ntp. Reads/writes via MQTT are working. My NTP settings are exactly the same as in the screenshot from @kibermanis No MCU Error messages in the MQTT output.

[1300371]

The issue seems resolved on z2m side with the tuya reimplementation. See https://github.com/Koenkk/zigbee2mqtt/issues/4185#issuecomment-771608497