search

klausahrenberg / WThermostatBeca

Replaces original Tuya firmware on Beca thermostat with ESP8266 wifi module
397 stars 97 forks source link

ME81H pictures for documentation #188

Closed Gulpman closed 3 years ago

Gulpman commented 3 years ago

Hi, I ordered a ME81H - after some search on this page I found out that it should be the same as the ME81AH mentioned here. Searching the docs I fould pics from other thermostats but not from the ME81H.

I did some pics and hope they are helpful for the documentation.

IMG_20210128_163142 IMG_20210128_163238 IMG_20210128_163249 IMG_20210128_163800 IMG_20210128_163810 IMG_20210128_170157

I will do the soldering and flashing on the weekend. :) If I understood correctly, I must use V1.20 for this thermostat.

Best Sascha

klausahrenberg commented 3 years ago

Thanks for the pictures, I will add it to the docs. Yes, for this Thermostat use the latest firmware of 1.20. However, it seems that the support isn't fully working yet. I don't own this one, so every feedback is welcome to finish the implementation for this device.

Elwell commented 3 years ago

I've just ordered one of these and noticed the board rev has gone up to 1.2. Picture at https://twitter.com/elwell2000/status/1394228472541679617/photo/1