search

klausahrenberg / WThermostatBeca

Replaces original Tuya firmware on Beca thermostat with ESP8266 wifi module
395 stars 96 forks source link

Bac-002alw fan stop when desired temperature reach. #225

Open brazil83 opened 3 years ago

brazil83 commented 3 years ago

Hi,plz i need help guys, i have bac-002alw, so when desired temp equal actual temp, the AC stops working (both fan and valve are OFF)... then when actual temp equal +1 from desired temp, the AC works (both fan and valve are ON).. my questions:

1- i need the AC to be working always, is there a way when desired temp equal actual temp that the fan continues to work but the valve close, and when temperature raises the valve will work again? 2- i want the AC (valve) to work if the gap between the desired temp & actual temp is 0.5 Celsius not 1, is there a way to reduce that gap?

mromaithi commented 2 years ago

Hi,

Turn off the AC Hold the first two button from the left The screen will turn on with a number Press the mode button once(square one), it will take you to the next option You should see a 0 in the screen, press the ^ button (inc temp) so it will change to 1 Turn on the AC Done