ME81AH problem with WThermostatBeca_weterings V 1.1.0

[dwarning]

@AlbertWeterings: I updated from version 1.0.11 beta to latest 1.1.0 beta. Few issues:

• WiFi symbol missing, but connection to web config was possible
• Info page not accessible, other pages OK
• MQTT connection seems broken - no update

So I downgraded again to 1.0.11 and everything works.

[AlbertWeterings]

@dwarning

I was able to reproduce on my ME102H only:

• Info page not accessible, other pages OK

The other two problems I did not see on my Thermostat. Created a new release Beta-1.1.1 This solved the info page on my thermostat the WiFi symbol was still there and MQTT was updating.

Let me know if this solves your issues to?

[dwarning]

How you make the Update? If I make the OTA update I get lot of trouble with my HA system FHEM. The symbol is away and some times I have to set some settings like the sensor usage. If I make then a cold start by switching power total off/on everything is OK. So I am fearing a bit to change the running system.

[AlbertWeterings]

@dwarning I update my ME102H via OTH. I think what is causing this issues is the change of the library WAdapter-1.24 to WAdapter-1.25 and the update of some other ESP8266 libraries. These libraries are updated automatically by platform IO something I have no control over.

[AlbertWeterings]

@dwarning, on my thermostat I checked if there is a difference in MQTT communication and I see no difference. I went back to 1.0.9 and the latest version.

[dwarning]

Firmware 1.0.11 works reliable.