Printing Error

[wurth70]

Using Pronterface 2.0 to drive a DuettWifi system. After loading STL file (and successful slicing) I select the "Print" button and get the following errors in the console:

---

The print goes:

• from 0.25 mm to 199.75 mm in X and is 199.50 mm wide
• from 83.88 mm to 116.12 mm in Y and is 32.25 mm deep
• from 0.00 mm to 35.15 mm in Z and is 35.15 mm high Estimated duration: 117 layers, 1:19:32 Error: Bad command: -1 M110 Error: Bad command: -1 M110

Print started at: 20:09:37

---

The printer never responds but the Pronterface program thinks it is printing.

[a2k-hanlon]

Hi @wurth70, sorry your issue didn't get addressed when you posted it. If you still use Printrun, would you please test this again on a recent version? Prebuilt binaries can be found here: https://github.com/kliment/Printrun/releases/latest

We would appreciate your help to resolve/close the issue!