Open tomoyanonymous opened 1 year ago
Hello, I have a similar problem. I can't find the driver version 32.7 for HAKRC BlHeli32 dshot1200. With the driver of a newer version, the motor does not spin. The motor makes creaking sounds and periodically twitches. I hope you can help solve this problem. Thanks
Same problem here. With telemetry plugged, the motor is bugged. You can run it without the telemetry but the motor will run at max speed and stop brutaly without deceleration. It's a very good project but it's sad to be stuck like this. We really need a solution or an alternative.
I have the same problem. Maybe we can update the ESP32 firmware to work with BLHeli_32 V32.10?
I have the same problem. Maybe we can update the ESP32 firmware to work with BLHeli_32 V32.10?
Hi. My problem turned out to be a bad motor. Upon closer inspection, I found that one of the three wires had broken inside the motor housing. I bought a new one and everything worked fine with it!
BlHeli32 appears to be permanently down. Any alternatives?
Hello. I'm trying to build this project with HAKRC BLHeli32 dshot1200 35A. When I tried to flash firmware to the ESC, only 32.8 and 32.9 were shown and 32.7 were not. In the instruction, 32.8 is not recommended but how is the 32.9? If the 32.9 can not be used, is there any way to get and install v32.7? (I'm getting used to use Arduino stuff but really new to use ESC.)
Thanks.