search

km4ack / pi-build

https://youtube.com/km4ack
337 stars 71 forks source link

ardop not working #37

Closed PD7RON closed 4 years ago

PD7RON commented 4 years ago

Hello Jason I have installed a new buster on a raspberry pi 3 B+ and then everything for the pi build V2. At the first connection in the ardop mode I get a message you can see on the picture. In the next connection the frequency changes but there is nothing happening and it changes back to situation at the start. (picture) The ax25 on 2m is working without problems. In the buster version where I have installed only the "Pat menu" the ardop mode is working without any problems. I have compared both images to see if there is a difference but they are similar to each other as far as i can see. I hope someone can help me to make it work.

IMG_8103

73 Ron PD7RON

km4ack commented 4 years ago

Are you using ARDOP over 2M?

km4ack commented 4 years ago

My bad, I misread the text in the photo the first time. Which rig are you using? Which sound card are you using? Are you using CAT for PTT control or VOX?

PD7RON commented 4 years ago

No I am using Ardop on hf. Ron

Op 12 mrt. 2020 om 20:03 heeft KM4ACK notifications@github.com het volgende geschreven:

Are you using ARDOP over 2M?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

PD7RON commented 4 years ago

I am using a IC7100 and cat. This configuration is working in the first image with only pat and the pat menu. When I start ardop with 2 in the menu it changes de mode to usb-d and I see the frequency where the rig is in. Then the first connection gives an error and the second connection to hb9ak changes the frequency to 7050 mhz it is then waiting and after a few seconds it changes back to the starting position. Without cat making to send the ic7100.

73 Ron

Op 12 mrt. 2020 om 20:03 heeft KM4ACK notifications@github.com het volgende geschreven:

Are you using ARDOP over 2M?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

km4ack commented 4 years ago

I think I see the problem now. In your pat configure file, it looks like you entered a really long grid square. You need to shorten that to 6 characters. Use the pat menu, choose option 1, and then option 1 again. Re enter your Winlink credentials and set the grid square to 6 characters. Then try the ARDOP connection again and see if the problem clears.

PD7RON commented 4 years ago

Yes Jason this was the problem. It is working now. In my situation, working with the ic7100, i had to make a change in the “pat configure”. Under ardop i changed ptt_ctrl from false to true. True makes the ic7100 transmitting. False there is only a frequency change but no transmit. Jason tnx for solving this problem. It works now very fine. I like the software so as it is made with the amateur features so together and the working of it.

73 Ron PD7RON

Op 13 mrt. 2020 om 01:16 heeft KM4ACK notifications@github.com het volgende geschreven:

I think I see the problem now. In your pat configure file, it looks like you entered a really long grid square. You need to shorten that to 6 characters. Use the pat menu, choose option 1, and then option 1 again. Re enter your Winlink credentials and set the grid square to 6 characters. Then try the ARDOP connection again and see if the problem clears.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

km4ack commented 4 years ago

Glad it's working Ron. 73